• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.85-95
• /
• 2020

According to the standard guidelines of design flood (MLTM, 2012; MOE, 2019), the design flood is calculated based on past precipitation. However, due to climate change, the frequency of extreme rainfall events is increasing. Therefore, it is necessary to analyze future floods' volume by using climate change scenarios. Meanwhile, the standard guideline was revised by MOE (Ministry of Environment) recently. MOE proposed modified Huff distribution and new CN (Curve Number) value of forest and paddy. The objective of this study was to analyze the change of flood volume by applying the modified Huff and newly proposed CN to the probabilistic precipitation based on SSP and RCP scenarios. The probabilistic rainfall under climate change was calculated through RCP 4.5/8.5 scenarios and SSP 245/585 scenarios. HEC-HMS (Hydrologic Engineering Center - Hydrologic Modeling System) was simulated for evaluating the flood volume. When RCP 4.5/8.5 scenario was changed to SSP 245/585 scenario, the average flood volume increased by 627 ㎥/s (15%) and 523 ㎥/s (13%), respectively. By the modified Huff distribution, the flood volume increased by 139 ㎥/s (3.76%) on a 200-yr frequency and 171 ㎥/s (4.05%) on a 500-yr frequency. The newly proposed CN made the future flood value increase by 9.5 ㎥/s (0.30%) on a 200-yr frequency and 8.5 ㎥/s (0.25%) on a 500-yr frequency. The selection of climate change scenario was the biggest factor that made the flood volume to transform. Also, the impact of change in Huff was larger than that of CN about 13-16 times.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.373-379
• /
• 2019

Polymethyl methacrylate (PMMA), a self-polymerizing resin for removable orthodontic devices, has been used as a dental orthodontic device for many years because of its advantages such as color stability, volume stability, and tissue compatibility. However, such a removable orthodontic device has a disadvantage that the longer the use in the oral cavity due to the low strength of the PMMA fracture of the orthodontic device resin in use. In this study, zinc nanoparticles (ZNP) were mixed with orthodontic PMMA to introduce strength effect. Rectangular samples ($1.4{\times}3.0{\times}19.0mm$) of orthodontic PMMA (0, 0.5, 1.0, 2.0 and 4.0%) containing ZNP were prepared. The finished specimen was tested for three-point bending strength at a speed of 1 mm / min, and the Vickers hardness was measured three times using a hardness tester. The surface roughness was measured with a surface roughness. As a result, the 3-point bending strength did not change significantly (p>0.05). Surface energy increased significantly. As a result, we successfully synthesized ZNP in this study and prepared the dispersed resin specimen for calibration. It will be possible to develop high-density dental orthodontic resins.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.209-221
• /
• 2019

Cooperating with a supplier with professional skills is necessary to achieve performance in the development of the innovative products. It is also important to improve development competence and share knowledge. This study empirically analyzed the effect of participant's Job Competence and Leadership Competence on Knowledge Sharing, and the effect of Purchaser Interdependence on Supplier Absorption Capacity. The purpose of the study is to confirm that Knowledge Sharing between Development Participant and Supplier contributes to Performance and to demonstrate the need for a cooperative relationship with the Supplier. A survey was conducted on the product development participants to confirm the relationship between the factors using a Structural Equation Model. As a result of the hypothesis test, the better the Individual Competence of the development participants, the better the Knowledge Sharing Activity, and then Knowledge Sharing and Interdependence are the main factor in the Absorption Capacity of the Supplier. The results of this study can contribute to improving the Supplier Absorption Capacity in the product development projects in which high technology is converged. In the future, we will study the effects of the project support activities of related departments for Performance.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.557-567
• /
• 2019

This investigation was conducted to derive future recognition and future competency of career counselors using future workshops and to verify the effectiveness of improving future adaptability. For this purpose, the future workshop was conducted for 25 career counselors and the data written and the discussion contents of the future workshop were analyzed. For analysis, word frequency analysis and corresponding sample T-verification were conducted, and the main words were derived through consensus. The results, First, the keywords of future recognition showed high frequency of robot, artificial intelligence, leisure, education, convenience, and the disabled. Second, the future labor sites projected the most changes due to high technology. Third, at the career counseling site, professional career counselors and robot counselors related to the fourth industrial revolution are expected to appear. Fourth, future competencies of career counselors were derived from information processing ability, professional counseling ability, communication ability, and ethical consciousness. Finally, it was confirmed that the future adaptability of career counselors increases after participating in future workshops, and the future competencies derived from this study are expected to be used for job training of career counselors.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.39-49
• /
• 2013

In this paper, security mechanism of internal network(CAN) of vehicle is a very incomplete state and the possibility of external threats as a way to build a test environment that you can easily buy from the market by the vehicle's ECU(Electric Control Unit) to verify and obtain a CAN message. Then, by applying it to ECU of the real car to try to attack is proposed. A recent study, Anyone can see plain-text status of the CAN message in the vehicle. so that in order to verify the information is vulnerable to attack from outside, analyze the data in a vehicle has had a successful attack, but attack to reverse engineering in the stationary state and buying a car should attempt has disadvantages that spatial, financial, and time costs occurs. Found through the car's ECU CAN message is applied to a real car for Potential threats outside of the car to perform an experiment to verify and equipped with a wireless network environment, the experimental results, proposed method through in the car to make sure the attack is possible. As a result, reduce the costs incurred in previous studies and in the information absence state of the car, potential of vehicle's ECU attack looks.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.74-79
• /
• 2014

Microfibrillated cellulose (MFC) was chemically modified with two different silane coupling agents (3-aminopropyltriethoxysilane and 3-mercaptopropyltriethoxysilane) and lauroyl chloride. The surface modification of MFC was confirmed by infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), and contact angle measurements. Composite paper was successfully prepared with surface modified MFC and polyamide (PA) fiber. The surface modification of MFC not only prevented aggregation of MFC but also improved adhesive property between PA fiber and surface modified MFC. It was impossible to prepare papers of only PA fiber because there is no binder to connect PA fibers. That is, surface modified MFC as a binder in PA fiber played a crucial role in making composite paper. Composite paper with silane modified MFC showed higher tensile strength and modulus than composite paper with lauroyl moiety modified MFC. The structure, morphology, and mechanical properties of composite paper were analyzed by scanning electron microscope (SEM) and universal testing machine (UTM).

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.7
• /
• pp.175-185
• /
• 2019

In order for learners with different characteristics to reach meaningful learning, the curriculum - class-assessment must be integrated. In this study, we classified the integration into three aspects: content compatibility, operator convergence, and institutional connectivity, and looked at the status of unifying special classes in general schools from each perspective. As a result of the study, in terms of content suitability, adjustment of the curriculum to those subject to special education-professorial revision-assessment adjustment was not performed well except for subjects where individualization professors were conducted. From an actor's perspective, the ambiguity of the roles of general and special teachers resulted in the inability of curriculum coordinators, educators, evaluators and others to agree or even minimal consultations. In terms of institutional linkage, the authority and role of curriculum coordination, professorial revision, and assessment coordination were unclear except for subjects where individualization professors were conducted. As an alternative to discuss and remedy these problems, it proposed increasing awareness of individualized education, compulsory consultation and institutional readjustment.

• Journal of Adhesion and Interface
• /
• v.22 no.4
• /
• pp.136-143
• /
• 2021

Polyurea has been investigated as a polymer matrix for composite materials because of its high mechanical strength. Although polyurea has a similar chemical structure to polyurethane, it has much higher strength and durability. In this study, the fabrication of polyurea composites reinforced with carbon nanotube (CNT) and graphene oxide (GO) is demonstrated to enhance the tensile strength of the glass fibers composite. Using FTIR and Raman spectroscopies, the chemical structures of polyurea, CNT, and GO are investigated. As a result, spectroscopy analysis reveals that the chemical structure of CNT, GO, and polyurea is maintained during the fabrication of the composite structure. Scanning electron microscopy reveals the uniform distribution of CNT and GO across the polyurea matrix. The reinforcement of 1 wt% CNT in polyurea enhances the tensile strength of CNT/polyurea composites. In contrast, the reinforcement of GO in polyurea induces the degradation of the tensile strength of GO/polyurea composites.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.395-400
• /
• 2019

Contemporary society, the era of the 4th industrial revolution, has been enjoying a boom in the cosmetics industry due to the launch of cosmetics through new technology development due to the interest in the beauty industry. However, the cosmetics industry is booming, but dry eye syndrome, skin trouble, Hormonal disturbances, and many other side effects. In order to prove the universal use value of pine needles as a natural cosmetic material that can complement the side effects of existing chemical ingredients cosmetics harmful to human body, and to propose a roll model of desirable natural cosmetics, DPPH radical scavenging activity, ABTS assay, and flavonoid content were studied. The results showed that both the DPPH radical and ABTS radical scavenging activity increased in both the $70^{\circ}C$ and $100^{\circ}C$ pine water hot water extracts. The extracts from the pine tree extracts at $70^{\circ}C$ and $100^{\circ}C$ showed $32.0{\pm}2.5mg\;QE/ml$ and 116.8 A total flavonoid of ${\pm}5.5mg\;QE/ml$ was detected. Therefore, it is considered that the pine needle hydrothermal extract having a large amount of antioxidant which is advantageous to human body is highly applicable as a natural cosmetic material harmless to the human body.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.337-347
• /
• 2018

Weather causes much of the risk of agricultural activity. For efficient farming, we need to use weather information. Modern agriculture has been developed to create high added value through convergence with state-of-the-art Information and Communication Technology (ICT). This study deals with the quality control algorithms of weather monitoring equipment through Ubiquitous Sensor Network (USN) observational equipment for efficient cultivation of cabbage. Accurate weather observations are important. To achieve this goal, the Korea Meteorological Administration, for example, developed various quality control algorithms to determine regularity of the observation. The research data of this study were obtained from five USN stations, which were installed in Anbandegi and Gwinemi from 2015 to 2017. Quality control algorithms were developed for flat line check, temporal outliers check, time series consistency check and spatial outliers check. Finally, the quality control algorithms proposed in this study can also identify potential abnormal observations taking into account the temporal and spatial characteristics of weather data. It is expected to be useful for efficient management of highland cabbage production by providing quality-controlled weather data.