• 한국화재소방학회논문지
• /
• 제21권4호
• /
• pp.59-64
• /
• 2007

본 논문은 전동기에 발생하는 화재에 대한 연구로서, 일반가전제품에 사용되고 있는 단상유도전동기에 과부하 및 외부화염을 가하여 그 변형 및 파손상태를 비교 분석하였다. 실험은 전동기의 구속을 통한 과부하 시험과 외부에서 화염을 가하는 실험으로 진행하였으며, 외부화염 시험의 경우 전압을 인가한 경우와 인가하지 않은 경우로 구분하였다. 실험결과 구속을 통한 과부하 시험의 경우 권선부분에서 층간 단락흔을 관찰할 수 있었고, 권선부분의 조직에서는 과부하에 의해 변형된 전선의 특징인 나무줄기 형상의 수지상 조직이 나타났다. 전압을 인가한 상태에서 외부화염을 가한 경우 고정자 권선부분의 코일이 원형을 유지하고 있는 것을 확인할 수 있었고, 권선주변의 색이 붉게 변색된 것을 볼 수 있었다. 전압을 인가하지 않고 외부화염을 가한 경우 고정자 권선부분의 코일이 원형에서 많이 변형된 것을 관찰할 수 있었고, 권선 주변의 색은 전압을 인가한 경우와 마찬가지로 붉게 변색된 것을 확인할 수 있었다.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.242-251
• /
• 2016

Around the world, BIM application has been mandated. In Korea, an announcement was made in 2016 that BIM application will be required for all public constructions ordered by the Public Procurement Service. However, BIM cannot be used for building permits as Seumter, a building permit system, doesn't support BIM, even if it was used for building design. To utilize BIM for permit application, this study introduces a method of management for BIM-used permit application information. It was done by analyzing the data entered for new building permit application in Seumter. For the analysis, the permit application information is classified as internal BIM information and external BIM information and the required information is defined. To easily create and utilize the data types at the design stage, this study introduces a method of creating and utilizing a permit template. Also, this study developed a tool for combining the area information to add up all the related information such as gross floor area and floor area ratio. This study is significant in that it analyzes the required information for new building permit application among all the permit application types in Korea.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2003년도 추계학술대회
• /
• pp.822-840
• /
• 2003

The Basic Profile has helped interoperability. Sample Application experience is already reflected in a most major platforms. Usage Scenarios valuable in identifying where BP restrictions apply. Testing is critical.

• 한국IT서비스학회지
• /
• 제13권1호
• /
• pp.209-220
• /
• 2014

Most of monitoring systems in logistics industry have limitations on monitoring container information in real-time. And customers only could check information gathered from certain points through web browser. That is why it is very hard to take actions in advance when emergency situation has happened. But if customers could check information such as position and status of freight in real-time through their mobile devices, they could take prompt actions. So, in this study, mobile application based on mobile devices is developed to monitor position and status information of the container in real-time. Entire devices monitoring container in aspect of logistics security are handled by workers in the field. So it is strongly required to develop monitoring system operated in mobile devices. For that reason this study aims to develop mobile application in order to monitor information related to container security and safety in real-time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.693-698
• /
• 2004

The cyber attacks on the computer system in nowadays are focused on works that do not operate specific application. The main key point that we protect information security system has an access control to keep an application. Most of system has a main function to protect an infrastructure such as hardware, network and operating system. In this paper, we have presented an intrusion tolerance system that can service an application in spite of cyber attacks. The proposed system is based on the middle ware integrating security mechanism and separate function of application and intrusion tolerance. The main factor we use security system in nowadays is service to keep a persistency. The proposed intrusion tolerance system is applicable to such as medical, national defense and banking system.

• 한국멀티미디어학회논문지
• /
• 제24권10호
• /
• pp.1326-1335
• /
• 2021

As part of the cell division method, we proposed a method for segmenting images generated by topography microscopes through deep learning-based feature generation and graph segmentation. Hybrid vector shapes preserve the overall shape and boundary information of cells, so most cell shapes can be captured without any post-processing burden. NIH-3T3 and Hela-S3 cells have satisfactory results in cell description preservation. Compared to other deep learning methods, the proposed cell image segmentation method does not require postprocessing. It is also effective in preserving the overall morphology of cells and has shown better results in terms of cell boundary preservation.

• 한국멀티미디어학회논문지
• /
• 제22권2호
• /
• pp.311-321
• /
• 2019

Virtual reality applications in Head-Mounted Displays require high frame rates and low latency rendering techniques. Ray tracing offers many benefits, such as high-quality image generation, but has not been utilized due to lower performance than rasterization. But that can obtain good result combined with gaze-tracking technology and human visual system's operation principle. In this paper, we propose a method to optimize the foveated sampling map and to maintain the visual quality through the fast voronoi nearest interpolation. The proposed method further reduces the computational cost that has been improved by the previous foveated sampling. It also smoothes the voronoi boundary using adaptive sibson interpolation, which was not possible in real-time. As a result, the proposed method can render real-time high-quality images with low visual difference.

• 디자인학연구
• /
• 제13권
• /
• pp.105-113
• /
• 1996

The great development of the modern science enables the information technology including computer to be promoted, which has the great effects on the whole design field. Most of all, the computer has the feature to express the mathmatical formular through the logic and system, which is being used very efficiently in the design work. CG application to the two-dimensional design may be limited in promoting the basic ability synthetically through the direct and molding experience for its attribute, however, it is possible to create the effects on the different level in addition to those from the traditional skill. In particular, we should keep the fact in mind that the CG application in the design field will be able to accomplish the object only under understanding the attributes and functions for it to have. We should carry out the task to agree with. First, it is necessary to develop the various study on the educational environment to make the process to solve the problems and to promote the effects of the educational media in teaching design with the CG application. This study would make plans to approach that the computer can be utilized for the main method to create design despite of being limited in some point. Moreover, it suggests the possibility for the CG application in the course of building up and motiving the models by applied the basic system, which enables the computer to be applied centering around the composition of geometry pattern of the basic course of the two-dimensional design.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.65-65
• /
• 2010

In shipbuilding industry, welding position are usually flat and vertical position at the erection stage. Application of SAW and EGW for these positions makes it possible to achieve enhanced productivity and high quality. But owing to their large size and weight it is difficult to apply these techniques in short and narrow regions. To overcome this problem, our company developed light weight and compact size 4-axis welding carriage which perform 3D weaving. The purpose of this study is to explain the development and application of intelligent welding carriage using 3D weaving pattern that can fill a large amount of welds and thereby making it possible to achieve high quality of welding. This study shows 3D weaving pattern, development of weaving database, and skill of adaptive control response for the variable gap. Also, it shows the results of procedure qualification test for the AH-grade steel when applied to the intelligent welding carriage.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.32-38
• /
• 2010

In shipbuilding industry, welding position are usually flat and vertical position at the erection stage. Application of SAW and EGW for these positions makes it possible to achieve enhanced productivity and high quality. But owing to their large size and weight it is difficult to apply these techniques in short and narrow regions. To overcome this problem, our company developed light weight and compact size 4-axis welding carriage which perform 3D weaving. The purpose of this study is to explain the development and application of intelligent welding carriage using 3D weaving pattern that can fill a large amount of welds and thereby making it possible to achieve high quality of welding. This study shows 3D weaving pattern, development of weaving database, and skill of adaptive control response for the variable gap. Also, it shows the results of procedure qualification test for the AH-grade steel when applied to the intelligent welding carriage.