• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.23-32
• /
• 2020

This study investigated the thermal degradation and fading behavior of PTT dyed with vat dye and its dyeing ability. The PTT sample was dyed with vat dye using an acid treatment and pad-steam method to improve the dyeing performance. This method made dye particle nanosize and allowed it to penetrate the polymer material easily. The sample dyed using the pad-steam method showed level dyeing and enhanced dyeing affinity, compared to the batch-dyeing method. The degradation behavior of PTT dyed with vat dye after each heat and UV treatment was examined with the change in tensile strength or K/S value on the sample. The tensile strength and K/S values of the sample dyed with vat dye after the heat and UV treatment decreased with increasing temperature and exposure time. Although they showed high degradation under severe conditions, its rate constant was improved compared to the samples dyed with disperse dye. Consequently, acid treatment and the pad-steam method resulted in the introduction of vat dye on PTT. In addition, the PTT dyed with vat dye showed enhanced thermal and UV resistance because of their high molecular weight and chemical structure for stable adsorption behavior.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.47-54
• /
• 2020

The acupressure is a treatment that applies pressure to certain parts of the body and has been mainly used for pain relief in the field of oriental medicine. However, the treatment effect is often different depending on the practitioner's ability, experience, and physical strength, so standardized acupressure is needed. In this regard, the equipment is being released, but this is mainly a rolling massage method, which reduces energy concentration and poses a risk of injury. Therefore, in this study, a device that provides vertical acupressure based on variable bogie (wheel truck) was implemented. As a result of experimenting with load and body pressure distribution and desirability to validate the device's bearing pressure, the acupressure rod held up to 150kg, the body pressure ratio was measured lower than the body pressure ratio of the comparison item in section 0%

• Journal of Industrial Convergence
• /
• v.19 no.1
• /
• pp.17-26
• /
• 2021

This study was conducted to do in-depth exploration of coroperate employees' learning experiences for workplace under COVID-19. We collected data through depth interviews from August 10th to November 30th, 2020 with five employees of S Energy company, and a qualitative case study was conducted using Ricci's 3-step analysis procedure. As a result, In the process of adapting from the landing of COVID-19, "The Story of a Distant Country," "No More Safe Zones," "Exploring effective responses created by a Sense of Crisis," and "Learning the changed way of work for adaptation." appeared. In addition, It has been found that the experience of learning in the work environment of the With Corona era includes "learning experience for survival from a sense of crisis", "learning experience for adapting to Untact culture", "learning experience through SNS communication", and "competitive learning experience for performance creation". In conclusion, employees have adapted to changes in the workplace environment through various learning experiences, which can enhance workers' ability to cope with crisis situations and can be used as basic data for an effective learning. In the future, we suggested follow-up researches of corporate employees in various fields.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.441-453
• /
• 2021

Recently, the untact healthcare industry due to COVID-19 has been attracting attention, and the telemedicine industry based on medical information has become a field of the healthcare industry receiving attention. However, in Korea, due to obstacles in the legal system, telemedicine is still illegal between doctors and patients. In the case of neighboring China, the reality is the opposite of the recent rapid growth of the telemedicine industry under the leadership of the government. This study looks at this from the perspective of the industrial innovation system on the grounds that telemedicine is an industry and innovative technology needs to be changed to clarify the difference between domestic and Chinese telemedicine industries. As a result of analyzing China's telemedicine industry on the seven sub-divisions of demand conditions, innovators, networks et al., Such as seizing appropriate opportunities for demand driving effects and appropriate communication between economic actors were identified as major success factors. This researcher proposes the following suggestions. first, it conforms to the current digital New Deal policy flow, and conducts a demand survey on the change in demand for medical services in the 4th Industrial Revolution and the Untact Era. For the introduction, a plan to conduct a demand survey for the public and second, second, a plan to grow and intensively foster digital high-tech medical care as a new industry was suggested.

• Informatization Policy
• /
• v.28 no.1
• /
• pp.3-21
• /
• 2021

Klaus Schwab's discussion on the Fourth Industrial Revolution provides a framework for predicting the direction of legal technology development. Technological convergence, which has emerged as the core concept of the Fourth Industrial Revolution has a significant effect on legal technology. In particular, various new technologies, such as legal chatbots and platforms, are being introduced to enhance efficiency and accessibility in the legal field. However, legal technology is still in its early stage, with institutional improvement needed to vitalize the industry. In this paper, we first specify the concept and classification of legal technology in Chapter 2, followed by trends and limitations in Chapter 3 and ways of vitalizing legal technology in the future in Chapter 4. To invigorate legal technology development, it is necessary to put in place legal regulatory measures that stipulate the active disclosure of legal data, such as precedents, and make free use of such measures. In the law, many issues, such as the safety of artificial intelligence, personal information protection, and ethical standards, will be discussed in the future. Therefore, via this paper, we hope to promote the formation of social consensus and prepare countermeasures, such as legislative measures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.61-68
• /
• 2020

In this study, the international standard ISO TS 16774 Part 3 Test Method for Water (wash out) Resistance and KS F 4935 ｢Sealant Injection type for water leakage maintenance of adhesive flexible rubber asphalt series｣, which are standardized as a quality control method of injection type repair materials used for water leakage cracks in underground concrete structures, are currently used in Korea. As a result, considering the performance criteria of "mass change rate -0.1%" stipulated in KS F 4935, the remaining 13 types repair materials, excluding RG-2 of synthetic rubber and UG-1 of urethane, need to be reviewed for stabilization of the loss resistance due to the flow of ground water. The results of this study are determined to be available as a basic indicator for the selection of repair materials used for cracks in concrete structures. In addition, it is expected that the results of this study can be utilized as reference data that can be reflected in the improvement of the quality of repair materials that will be researched and developed later.

• Journal of the Korean Society for Library and Information Science
• /
• v.55 no.1
• /
• pp.161-180
• /
• 2021

This study investigates ethical dilemmas of teacher-librarians in their professional practice. Within the framework of "Librarians' Statement of Ethics" by Korean Library Association, the study used the survey and semi-structured interview with teacher-librarians. 259 teacher-librarians responded the survey and 5 teacher-librarians participated the interview. The survey was analyzed using descriptive statistics to find how often teacher-librarians experience ethical dilemmas. The semi-structured interview was transcribed and analyzed to draw the individual cases of teacher-librarians' ethical dilemmas. The results indicate that teacher-librarians experience ethical dilemmas in relation to information access and intellectual freedom most often. It was difficult for teacher-librarians to relate their professional duties with their expertise and that they were not clear on how to avoid copyright issues and how to deal with the balance between users and copyright holders. This study had implications that individual dilemma cases are so context-dependent that teacher-librarians had to make decisions individually. They tried hard to find the balance between protecting students from harmful resources and library ethics. Researchers and practitioners need focus more on finding where the balance is and how teacher-librarians deal with their ethical dilemmas.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.922-930
• /
• 2020

Marine accidents involving fishing boats, caused by a loss of stability, have been increasing over the last decade. One of the main reasons for these accidents is a sudden wind attacks. In this regard, the wind loads acting on the ship hull need to be estimated accurately for safety assessments of the motion and maneuverability of the ship. Therefore, this study aims to develop a computational model for the inlet boundary condition and to numerically estimate the wind load acting on a fishing boat. In particular, wind loads acting on a fishing boat at the wind speed profile boundary condition were compared with the numerical results obtained under uniform wind speed. The wind loads were estimated at intervals of 15° over the range of 0° to 180°, and i.e., a total of 13 cases. Furthermore, a numerical mesh model was developed based on the results of the mesh dependency test. The numerical analysis was performed using the RANS-based commercial solver STAR-CCM+ (ver. 13.06) with the k-ω turbulent model in the steady state. The wind loads for surge, sway, and heave motions were reduced by 39.5 %, 41.6 %, and 46.1 % and roll, pitch, and yaw motions were 48.2 %, 50.6 %, and 36.5 %, respectively, as compared with the values under uniform wind speed. It was confirmed that the developed inlet boundary condition describing the wind speed gradient with respect to height features higher accuracy than the boundary condition of uniform wind speed. The insights obtained in this study can be useful for the development of a numerical computation method for ships.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.826-835
• /
• 2020

The purpose of this study was to examine the mediating effect of stress on the relationship between oral health behaviors and health-related quality of life (HRQOL) in the elderly. We analyzed 8148 subjects aged 65 or older who participated in the Korea National Health and Nutrition Examination Survey (2010-2015). All individuals were asked about their socioeconomic history, general health, and oral health behaviors (the frequency of tooth brushing, regular dental check-ups, and use of interdental cleaners). In the results, HRQOL was low in the elderly from a low socioeconomic class, or with diabetes mellitus, hypertension, or poor oral health behaviors. A partial mediating effect from stress was confirmed on the relationship between oral health behaviors and HRQOL. In conclusion, HRQOL was associated with oral health behaviors, with a mediating effect from stress. Therefore, it is necessary that a convergence health promotion program should be planned with an oral health education program and a stress management program for the elderly.

• Journal of Digital Convergence
• /
• v.19 no.3
• /
• pp.203-209
• /
• 2021

In this study, a prototype design model was proposed for developing an online recruitment system through multi-dimensional data crawling and social media analysis, and validates text information and video interview in job application process. This study includes a comparative analysis process through text mining to verify the authenticity of job application paperwork and to effectively hire and allocate workers based on the potential job capability. Based on the prototype system, we conducted performance tests and analyzed the result for key performance indicators such as text mining accuracy and interview STT(speech to text) function recognition rate. If commercialized based on design specifications and prototype development results derived from this study, it may be expected to be utilized as the intelligent online recruitment system technology required in the public and private recruitment markets in the future.