• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.362-368
• /
• 2016

In the recent International Maritime Organization's (IMOs) Maritime Safety Committee's 93rd session, the International Chamber of Shipping and International Parcel Tankers Association addressed marine fuel oil quality problems: increasing diluents in marine fuel oil, ignition in engine rooms due to the low flash point of fuel oil, and marine fuel oils that can damage marine engines. To deal with these marine fuel oil quality problems, the International Maritime Organization secretariat appointed the worlds marine fuel oil monitoring institute and constituted a correspondence group to determine the fuel oil quality required by MARPOL Annex VI regulation 14.8 (sulfur content less than 0.5%). In this study, basic research that can help with responding to marine fuel quality issues and the IMO's work is conducted. In order to perform this basic research, the off-spec ratio related to the fuel oil quality standard (ISO 8217:2012), density distribution tendency, gross specific energy, and correlation between components in the fuel oil are analyzed through actual marine fuel oil (residual marine fuel) data from the Port of Singapore.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.378-384
• /
• 2013

We have investigated the electrical characteristics of SCR(Silicon Controlled Rectifier)-based ESD power clamp circuit with high holding voltage and dual-directional ESD protection cells for a whole-chip ESD protection. The measurement results indicate that the dimension of n/p-well and p-drift has a great effect on holding voltage (2V-5V). Also A dual-directional ESD protection circuit is designed for I/O ESD protection application. The trigger voltage and the holding voltage are measured to 5V and 3V respectively. In comparison with typical ESD protection schemes for whole-chip ESD protection, this ESD protection device can provide an effective protection for ICs against ESD pulses in the two opposite directions, so this design scheme for whole-chip ESD protection can be discharged in ESD-stress mode (PD, ND, PS, NS) as well as VDD-VSS mode. Finally, a whole-chip ESD protection can be applied to 2.5~3.3V VDD applications. The robustness of the novel ESD protection cells are measured to HBM 8kV and MM 400V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.7-14
• /
• 2008

In this paper, we designed the HVIC(High Voltage Gate Driver IC) which has improved noise immunity characteristics and high driving capability. Operating frequency and input voltage range of the designed HVIC is up to 500kHz and 650V, respectively. Noise protection and schmitt trigger circuit is included in the high-side level shifter of designed IC which has very high dv/dt noise immunity characteristic(up to 50V/ns). And also, rower dissipation of high-side level shifter with designed short-pulse generation circuit decreased more that 40% compare with conventional circuit. In addition, designed HVIC includes protection and UVLO circuit to prevent cross-conduction of power switch and sense power supply voltage of driving section, respectively. Protection and UVLO circuit can improve the stability of the designed HVIC. Spectre and Pspice circuit simulator were used to verify the operating characteristics of the designed HVIC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.323-329
• /
• 2017

Nowadays, considering global warming and enhanced prohibition to discharge pollutants at sea, all of existing operation-ships must lead to the reduction of fuel consumption. International standards of International Maritime Organization and EU rules governing harbor pollutants are being strengthened. Therefore, ship-owners and operators are seeking ways to reduce $CO_2$, SOx, and NOx emissions. Although world trade continues to expand, total fuel usage for sea transport tends to diminish. However, ICS(International Chamber of Shipping) has set a goal of reducing $CO_2$ emissions from shipping by 50% until 2050. In addition, with respect to the Paris Climate Change Accord in 2015, IMO proposes to set up a reduction target of GHG emission from existing operation-ships. For setting up a reduction target of GHG from international maritime transport, "A data collection system for fuel consumption" will be introduced in the near future. In order to effectively reduce the use of fuel in a ship in accordance with the trend of compulsory fuel saving from operation ships, this paper suggested adoption of an Incentive-Penalty scheme based on Emission-Trading-Scheme, Carbon Tax, and basic calculation formula after verifying the EEOI level for a year.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.132-137
• /
• 2001

Recently, the demand for notebook PC with lithium ion batteries has steadily increased and consumers require them to adopt a SBP(smart battery pack) able to predict the remaining capacity and the run time of batteries precisely. The SBP is composed of a protection If, by which safety of lithium ion batteries is maintained against overcharge, overdischarge and overcurrent, and a smart IC, which calculates the remaining capacity and the remaining run time. The protection IC shut abmormal current down by using overcharge/overdischarge FET. A SBS(smart battery system) is composed of a system host, a smart battery and a smart battery charger. The smart ICs for SBP will be required to provide a low cost, low current consumption and small size. There will need to develop a microcomputer control type IC and an optimum algorism which is able to predict the residual capacity and the residual run time precisely. SBS will apply to many kinds of industry fields such as an electric bicycle, an electric vehicle, a load levelling and a military.

• The Journal of Internal Korean Medicine
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2003

Background : In recent years, the glucocorticoid hormone has become a fundamental medication for asthma. However, a long period of hormone administration will result. in general. side effects on many body parts as well as hormone dependence, which has become a serious problem for western physicians. Objectives : We aimed to identify the clinical effects of Cheongsanghoha-tang and the steroid sparing effects of Cheongsanghoha-tang on. Materials and Methods : A subject group consists of 36 asthmatics who had been treated with Cheongsanghoha-tang for four weeks. Cheongsanghoha-tang is a herbal decoction, which has been used of the traditional therapeutic agent of asthma. PFT, QLQAKA, blood eosinophil, serum IgE, Serum IL-4. IL-5, IFN-${\gamma}$ were checked before and 4weeks after the treatment. Results : The only FVC% in ICSG among asthmatic patients was increased significantly compared to NICSG. Treatment of Cheongsanghoha-tang for four weeks resulted in significant increase in QLQAKA. The NICSG treated with Cheongsangboha-tang for four weeks were no significant difference in the blood eosinophil, serum IgE, IL-4 and IL-5. The PFT and QLQAKA in NICSG were increased significantly after 4 weeks treatment. But the serum IFN-${\gamma}$ in NICSG was decreased significantly after 4 weeks treatment. Discontinuation of treatment with inhaled corticosteroid in ICSG resulted in insignificant changes in PFT, the blood eosinophil, the serum IgE, IL-4, IL-5 and IFN-${\gamma}$ and significant increase in QLQAKA. As a result. 8 of 13 cases were cured with hormones completely and the rest of ICSG reduced the dose of ICS. Conclusions : This study shows that Cheongsanghoha-tang has the effects on the improvement of pulmonary function and cures asthmatic patients. These findings demonstrate that Cheongsanghoha-tang has the steroid sparing effect. Some satisfactory therapeutic results have been obtained in treating hormone-dependent asthma by Cheongsanghoha-tang. However. the concept and mechanism of hormone-dependent asthma have not been fully defined yet, and the standard for judging therapeutic effects have not been established. Obviously further researches concerning all these are still necessary.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.105-116
• /
• 2004

According to the developing advanced techniques and removal of Selective Availability, much research has been conducted to improve the accuracy of GPS positioning in absolute and relative mode by estimating the nuisance parameters such as atmospheric effect, clock errors and multipath. Especially, the continuous effort of establishing the CORS in many countries and the effort of ICS making effective global networking make more application areas and the necessity of more precise location is being increased. Some of the countries like German, Japan and Swiss already utilized the Virtual Reference System for better location accuracy and services. In this study, the VRS system is investigated in terms of system principle, required H/W and S/W, management and operation, revision of related law, expected application and market etc. and find optimal solution in each aspect for economic and fast set up of the system in this country. The analysis of Korean CORS, communication infra and market estimation is performed for the efficient system establishment. Also. the suggestion on the advertisement and education of the system is also included. It is expected that this study contributes for the establishment of effective and precise nationwide location service so that many SOC areas including navigation, GIS, Telematics, LBS can provides better service for the users.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.1
• /
• pp.123-133
• /
• 2012

Objectives : This study was performed to understand smoking condition and to investigate the relations among knowledge regarding smoking and oral hygiene, awareness of anti-smoking policy, and self-esteem, to provide fundamental basis, developing programs for smoking prevention and anti-smoking. Methods : From September 7, 2010 to September 16, 2010, questionaire survey was conducted for 566 female university students studying dental hygienics at a local district in Jeollanam-do. Collected data was analyzed by Chi-square test, t-test, one way ANOVA, Scheffe multiple range test, Perason's correlation test, and stepwise multiple regression test. Results : 1. Smoking condition of study subjects on general characteristics showed 17.1%, where 14.0% of previous smoking history, and 68.9% of currently nonsmoker. 2. Analysis on the knowledge related to smoking and oral hygiene, awareness of anti-smoking policy, and self esteem on the general characteristics of study subjects have shown better awareness of anti-smoking policy in non-alcoholics. Significant difference was found in knowledge about smoking and awareness of anti-smoking policy according to current resident status, but no difference found in self-esteem. Higher academic grade was related to higher awareness of anti-smoking policy and better ics. aalcell. Better health, but no diffeoral hygiene were related to better awareness of anti-smoking policy, and bewhich were statistically significant. Favorable interpersonal self-estehip was related to better awareness of anti-smoking policy. 3. Analysis on knowledge regarding smoking related health and oral hygiene, awareness of anti-smoking policy, and self-esteem showed higher level of anti-smoking knowledge in non-smoking group(60.44) compared to currently smoking group or group with previous history of smoking, and better awareness of anti-smoking policy in non-smoking group(53.54) than other groups, which was statistically significant. 4. Correlation analysis among smoking related knowledge, awareness of anti-smoking policy, and self-esteem has found relatively high correlation between smoking related knowledge and awareness of anti-smoking policy, which was statistically significant(r=0.481, p<0.001). 5. Among factors influencing awareness of anti-smoking policy, higher level of smoking related knowledge and satisfaction to specialty was related to higher awareness of anti-smoking policy which was lower in current smoker than past smoker, and higher academic grade was related to higher awareness of anti-smoking policy. Conclusions : Following results emphasize the need to establish a novel curriculum by which effective programs for smoking prevention and education of anti-smoking specialist could be provided as well as promoting coaching anti-smoking activity.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.289-321
• /
• 1996

After the two big wars (Imjin Woeran and Byungia Horan), the Lee Dynasty confronted rapid transitional periods in almost all aspects of the society. Corruption of the governmental system by the wars and disordered social structures also caused confusion in the social position system. In addition, development of the commercial economic system and monetary economy brought up a new rich middle-class, "Joong in Gyegeup". In ideological aspects, Confucianism indulged in and stick to isms and ics, and the Confucian morality slackened, thus a more pragmatic ideology, "Silhak Sasang", developed. And the emergence of the modern literature and art of the 'common people' was followed by the appearance of the common-people class including those having the common-people concept among the noble-class "Yangban Gyegeup". This evoked a new common costume culture and the fashion appeared. The public could no longer find the power and appeal from the preexisting ruling classes due to the changed role and sense of value. Thus, they sought a new symbolic leader group that would to be the new standard of the newly changed society. That was a group of people called as "Kisaeng" liberal and independent. They were performing social activities, enjoying poetry, music and dancing, and classy dressers, having physically attractive bodies. The erotic as well as luxurious mode proposed by them reflected the trend of that time. It concurred well with the concept and taste of the public, so it was accepted with a good response. That is, by following these leaders, the public achieved their identification and tried to share the prestige of the leaders. For this reason, the Kisaeng group attracted the public attention and led the taste of the public, thereby becoming the influential fashion leaders of that age.