• Applied Science and Convergence Technology
• /
• 제24권2호
• /
• pp.33-40
• /
• 2015

$ZrO_2$ and Al-Zr composite oxide film was prepared by vacuum assisted sol-gel dip coating method and anodizing. $ZrO_2$ films annealed above $400^{\circ}C$ have tetragonal structure. $ZrO_2$ layers inside etch pits were successfully coated from the $ZrO_2$ sol. The double layer structures of samples were obtained after being anodized at 100 V to 600 V. From the TEM images, it was found that the outer layer was $Al_2O_3$, the inner layer was multi-layer of $ZrO_2$, Al-Zr composite oxide and Al hydrate. The capacitance of $ZrO_2$ coated foil exhibited about 28.3% higher than that of non-coating foil after being anodized at 100 V. The high capacitance of $ZrO_2$ coated foils anodized at 100 V can be attributed to the relatively high percentage of inner layer in total thickness. The electrical properties, such as withstanding voltage and leakage current of coated and non-coated Al foils showed similar values. From the results, $ZrO_2$ and Al-Zr composite oxide is promising to be used as the partial dielectric of high voltage capacitor to increase the capacitance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.121.1-121.1
• /
• 2011

일반적으로 알콜계 물질은 가스 하이드레이트 형성에 저해제로 사용된다고 알려져 있으나, 최근의 연구를 통해 2-propanol이 일부 조건에서 촉진효과가 나타난다고 보고되고 있다. 본 연구에서는 알콜계 물질인 1-propanol과 2-propanol의 가스 하이드레이트 격자내로의 포집여부와 그로 인한 촉진 혹은 저해 작용 그리고 구조적 특성에 대해 알아보았다. $CO_2$와 $CH_4$ 기체에 대하여 1-propanol 혹은 2-propanol을 첨가하여 형성된 혼합 하이드레이트의 3상평형 기상(V)-물(Lw)-하이드레이트(H))을 측정하였다. 그 결과 $CO_2$의 경우 1-propanol과 2-propanol이 저해 작용을 함을 확인하였으며 농도가 높을수록 저해작용이 커짐을 알 수 있었다. 반면, $CH_4$의 경우 1-propanol에서는 저해 및 촉진효과가 거의 나타나지 않았지만, 2-propanol에서는 촉진효과가 나타났으며 5.6 mol%에서 촉진효과가 가장 크게 나타났다. 혼합 하이드레이트의 구조규명 및 동공 점유 분석을 위해 $^{13}C$ NMR과 XRD분석을 하였으며, 그 결과 2-propanol과 1-propanol을 포함하는 혼합 하이드레이트는 구조 II를 형성하며, 2-propanol과 1-propanol은 큰 동공에 포집되고, 기체는 작은 동공에 포집됨을 확인할 수 있었다. 본 연구의 결과는 알콜계 물질을 첨가제로 사용하는 가스 하이드레이트 공정에서 매우 유용한 기초자료가 될 것으로 사료된다.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.171-176
• /
• 2015

We present the detection characteristics of nitrogen monoxide(NO) gas using p-type copper oxide(CuO) thin film gas sensors. The CuO thin films were fabricated on glass substrates by a sol-gel spin coating method using copper acetate hydrate and diethanolamine as precursors. Structural characterizations revealed that we prepared the pure CuO thin films having a monoclinic crystalline structure without any obvious formation of secondary phase. It was found from the NO gas sensing measurements that the p-type CuO thin film gas sensors exhibited a maximum sensitivity to NO gas in dry air at an operating temperature as low as $100^{\circ}C$. Additionally, these CuO thin film gas sensors were found to show reversible and reliable electrical response to NO gas in a range of operating temperatures from $60^{\circ}C$ to $200^{\circ}C$. It is supposed from these results that the p-type oxide semiconductor CuO thin film could have significant potential for use in future gas sensors and other oxide electronics applications using oxide p-n heterojunction structures.

• 한국건축시공학회지
• /
• 제6권4호
• /
• pp.61-68
• /
• 2006

Recently, there have been many studies about recycling cementitious powder from concrete waste(hereinafter referred to as waste powder), generated after recycle aggregate production. Previous studies showed that when the heating process of waste powder at $700^{\circ}C,\;Ca(OH)_2$ in paste is dehydrated making possible the restoration of hydraulic properties. Recycled cement with hydraulic properties restored is thought to be re-hydrated through the mechanism of hydration, which is almost similar in Portland cement. This clearly suggests that the hydrate of recycled cement is alkali in type. Like in general concrete, if recycled cement is used as a structural material, resistance performance against carbonation or neutralization by $CaCO_3$ in air probably would be most influential to the life of steel-reinforced concrete structure. Thus the purpose of this study is to make an experimental review on chemical properties of recycled cement, manufactured with concrete waste as base material, and investigate the durability of concrete using recycled cement through evaluating the cement's performance of resistance to carbonation in accordance with its accelerating age. Based on its results, further, the study seeks to provide basic information about ways of utilizing recycled cement.

• Archives of Pharmacal Research
• /
• 제20권6호
• /
• pp.620-628
• /
• 1997

6-Aryl-5-cyano-4-pyrimidinon-2-thione derivatives 1a-c reacted with ethyl iodide to give the corresponded 2-S-ethylpyrimidin-4-one-derivatives 2a-c. Compounds 2a-c was, in turn, reacted with hydrazine hydrate to give the sulfur free reaction products, 3a-c. These reaction products were taken as the starting materials for the synthesis of several newly synthesized heterocyclic derivatives. Reactions with several halogenated ketones, esters, chloroacetic acid and chloroacetamide give pyrimidotriazines 8,12 and 15 while their reactions with formic acid, acetic acid and carbon disulfide gave the corresponded triazolopyrimidines 17 and 21. The reaction with both acetyl acetone and ethylacetoacetate gave the corresponded 2-$(3^{I},5^{I}-dimethyl-1^{I}-pyrazoly$pyrimidine derivatives 20a-c and 24a-c respectively while the reaction with cinnamonitriles 25a-h afforded the corresponded aryl hydrazopyrimidines 27a-f. The structure of these reaction products were eatablished based on both elemental anlayses and spectral data studies.

• Archives of Pharmacal Research
• /
• 제13권4호
• /
• pp.351-354
• /
• 1990

2, 3-diphenyl-4-cyano-pyrrole-5-thione (4) was either by the reaction of benzoin (1) and cyanothioacetamide (3) followed by cyclization using AcOH/sodium acetate or by refluxing a mixture of benzoin (1) and cyanothioacethamide in pyridine to afford directly 4. Several new pyrrole and pyrazole derivatives were synthesised using 4 as synthon. The structure of the newly synthesised derivatives were based on celemental and spectral data studies. Methylation of the SH group in 4 afforded 5. Reaction of 4 with ethyl bromo acetate afforded (6). Treatment of (5) and (6) with hydrazine hydrate afforded the same pyrazole derivative (10) through the intermediate (9). Treatment of 6 with aniline and phenylhydrazine afforded the pyrrole derivatives 8a, b respectively. Treatment of 6 while dill HCI gave 2, 3-diphenyl-4-cyano-pyrrole-5-one (7). Treatment of 6 with $NH_3$/EtOH afforded the amidic derivatives (11) with treatment of 6 $NH_3$/ heat then acidification it gave the carboxylic derivatives (12).

• 공업화학
• /
• 제30권6호
• /
• pp.652-658
• /
• 2019

하이드라진 직접 액체 연료전지는 이산화탄소를 배출하지 않으며, 높은 에너지 밀도를 가지고, 귀금속 촉매를 사용하지 않고도 높은 촉매 활성을 보이는 장점으로 유망한 연료전지로써 활발히 연구가 진행되어 왔다. 하지만, 고안전성 연료전지 운전 성능을 위해서는 전극촉매를 비롯한 핵심소재 개발 및 성능 연구를 토대로 연료의 물질전달 특성을 비롯한 하이드라진 연료전지 내에서 진행되고 있는 작동 프로세스를 충분히 이해할 필요성이 있다. 본 논문에서는 최근의 직접 하이드라진 연료전지 연구결과 중에 가격 경쟁력을 확보한 전극촉매 및 연료 확산, 물 관리, 기체 발생 측면에서 전극 구조 개발 동향을 소개하며 향후 개발 방향에 대해서 고찰하고자 한다.

• Applied Microscopy
• /
• 제42권2호
• /
• pp.111-114
• /
• 2012

The scanning electron microscopy is an ideal technique for examining plant surface at high resolution. Most hydrate samples, however, must be fix and dehydrate for observation in the scanning electron microscope. Because the microscopes operate under high vacuum, most specimens, especially biological samples, cannot withstand water removal by the vacuum system without morphological distortion. Cryo-techniques can observe in their original morphology and structure without various artifacts from conventional sample preparation. Rapid cooling is the method of choice for preparing plant samples for scanning electron microscopy in a defined physiological state. As one of cryo-technique, high-pressure freezing allows for fixation of native non-pretreated samples up to $200{\mu}M$ thick and 2 mm wide with minimal or no ice crystal damage for the freezing procedure. In this study, we could design to optimize structural preservation and imaging by comparing cryo-SEM and convention SEM preparation, and observe a fine, well preserved Arabidopsis stem's inner ultrastructure using HPF and cryo-SEM. These results would suggest a useful method of cryo-preparation and cryo-SEM for plant tissues, especially intratubule and vacuole rich structure.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.280-285
• /
• 2016

In this study, we investigated the influences of potassium fluoride(KF) addition on the surface characteristics of plasma electrolytic oxidation(PEO) coating produced on Al alloy. The PEO of marine grade Al alloy(5083 grade) was conducted in KOH 1g/L solution adding different concentrations of KF(0, 1 and 2 g/L) under a galvanostatic regime. With KF addition, unusual behavior was observed on the voltage-time characteristic curves, which can be characterized by the following process: (i) initial rapid increase in voltage (ii) a short plateau after 1st breakdown (iii) gradual increase in voltage (iv) intermittent fluctuation of voltage after 2nd breakdown. The SEM observation revealed irregular surface morphology with KF addition, as compared with one formed without KF addition, which had a reticulate structure. The XRD analysis detected the formation of aluminium hydroxide fluoride hydrate($H_{4.76}Al_2F_{3.24}O_{3.76}$) on surface grown by PEO process with KF. Particularly, at very early stage of the process (~ 120 s), thin film was formed having nanoporous structure, and F element was confirmed on surface by EDS analysis. The thickness and surface roughness of the coating increased with increasing KF concentration. As a result, KF addition was found to be less beneficial influences on PEO of marine grade Al alloy, and therefore needs further research to improve its capability.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.504-507
• /
• 2012

Synthesis of RGO (reduced graphene oxide)-CdS composite material was performed through CBD (chemical bath deposition) method in which graphene oxide served as the support and Cadmium Sulfate Hydrate as the starting material. Graphene-based semiconductor photocatalysts have attracted extensive attention due to their usefulness for environmental and energy applications. The band gap (2.4 eV) of CdS corresponds well with the spectrum of sunlight because the crystalline phase, size, morphology, specic surface area and defects, etc., of CdS can affect its photocatalytic activity. The specific surface structure (morphology) of the photocatalyst can be effective for the suppression of recombination between photogenerated electrons and holes. Graphene (GN) has unique properties such as a high value of Young's modulus, large theoretical specific surface area, excellent thermal conductivity, high mobility of charge carriers, and good optical transmittance. These excellent properties make GN an ideal building block in nanocomposites. It can act as an excellent electron-acceptor/transport material. Therefore, the morphology, structural characterization and crystal structure were observed using various analytical tools, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. From this analysis, it is shown that CdS particles were well dispersed uniformly in the RGO sheet. Furthermore, the photocatalytic property of the resulting RGO-CdS composite is also discussed in relation to environmental applications such as the photocatalytic degradation of pollutants. It was found that the prepared RGO-CdS nanocomposites exhibited enhanced photocatalytic activity as compared with that of CdS nanoparticles. Therefore, better efficiency of photodegradation was found for water purification applications using RGO-CdS composite.