• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1363-1368
• /
• 2011

This paper describes an analysis on the granular noise in pixel-to-pixel mapping-based computational integral imaging. The pixel mapping-based method provides a high-resolution reconstructed images and also its computational cost is very lower than the previous back-projection-based method. In this paper, a signal model for the pixel mapping-based method is introduced, which defines and analyzes the granular noise. Computer experiments provides the granular noise properties based on the proposed signal model. The experimental results indicates that the granular noise pattern differs from that of the back-projection based method. The results is also utilized in the pixel mapping-based method.

• The KIPS Transactions:PartA
• /
• v.15A no.5
• /
• pp.269-274
• /
• 2008

Recently, lots of embedded processors which can run streaming multimedia with high resolution display are introduced. Among the applications running on these embedded processors, real-time audio streaming is one of the applications that suffer from the lack of energy and memory space. In this paper, we propose a novel data compression method on scratch-pad memory, which saves both useful space on the scratch-pad memory and energy. We have implemented the data compression scheme on the GDM1202 real-time audio streaming processor, and the performance results show that we obtained 13.3% energy saving while maintaining comparable application performance to that of the non-compression case.

• Clinical and Experimental Pediatrics
• /
• v.57 no.7
• /
• pp.333-336
• /
• 2014

Reports of constitutional ring chromosome 22, r(22) are rare. Individuals with r(22) present similar features as those with the 22q13 deletion syndrome. The instability in the ring chromosome contributes to the development of variable phenotypes. Central nervous system (CNS) atypical teratoid rhabdoid tumors (ATRTs) are rare, highly malignant tumors, primarily occurring in young children below 3 years of age. The majority of ATRT cases display genetic alterations of SMARCB1 (INI1/hSNF5 ), a tumor suppressor gene located on 22q11.2. The coexistence of a CNS ATRT in a child with a r(22) is rare. We present a case of a 4-month-old boy with 46,XY,r(22)(p13q13.3), generalized hypotonia and delayed development. High-resolution microarray analysis revealed a 3.5-Mb deletion at 22q13.31q13.33. At 11 months, the patient had an ATRT ($5.6cm{\times}5.0cm{\times}7.6cm$) in the cerebellar vermis, which was detected in the brain via magnetic resonance imaging.

• The Journal of Engineering Geology
• /
• v.7 no.1
• /
• pp.11-26
• /
• 1997

Through the Korea-Germany joint project, a novel method, that is, an optical Corescanner (Stereophotogramrnetry) of acquisition, evaluation and display of struct-ural elements of drill cores has heen realized. AH scannable cores can he digitally stored on a storage device(dat tape, optical disc etc.) and available for further an-alysis using diverse software facilities. The use of this scanning technique was d-emonstrated on the cores derived from the metamorphosed sedimentary rocks in our country. Recent studies showed a great potential of using the Corescanner with high resolution not only for avoiding ambiguities of drill log interpretation due to the capability of accurate quantative analysis of structural elements, but also for replacing the cores themselves as a data-base one via completely copying of the core outlook.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.132-138
• /
• 2007

Carbon nanotubes (CNTs) arc grown on Ni catalysts employing an inductively-coupled plasma chemical vapor deposition (ICP-CVD) method. The structural and field-emissive properties of the CNTs grown are characterized in terms of the substrate-bias applied. Characterization using the various techniques, such as field-omission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Auger spectroscopy (AES), and Raman spectroscopy, shows that the structural properties of the CNTs, including their physical dimensions and crystal qualities, as well as the nature of vertical growth, are strongly dependent upon the application of substrate bias during CNT growth. It is for the first time observed that the provailing growth mechanism of CNTs, which is either due to tip-driven growth or based-on-catalyst growth, may be influenced by substrate biasing. It is also seen that negatively substrate-biasing would promote the vertical-alignment of the CNTs grown, compared to positively substrate-biasing. However, the CNTs grown under the positively-biased condition display a higher electron-emission capability than those grown under the negatively-biased condition or without any bias applied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.129-137
• /
• 2010

There are a lot of multimedia functions getting included in mobile devices recently, not only simple audio but visual functions as well, such as video playing, game and web browsing. Such the visual multimedia functions brought the strong requirement for much bigger LCD Display and high resolution. And the brightness of LCD is also one of major requirements and it is required to be more bright. However, LCD brightness is limited to increase because of power consumption. It occupies nearly 30% of the whole system power. This thesis suggests an effective and simple method of adjusting the LCD backlight brightness, considering a characteristic of battery and user pattern.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.186-189
• /
• 2006

The flexible organic thin film transistor (OTFT) array to use as a switching device for an organic light emitting diode (OLED) was designed and fabricated in the microcontact printing and room temperature process. The gate, source, and drain electrode patterns of OTFT were fabricated by microcontact printing process. The OTFT array with dielectric layer and organic active semiconductor layer formed at room temperature or at a temperature lower than $40^{\circ}C$. The microcontact printing process using SAM and PDMS stamp made it possible to fabricate OTFT arrays with channel lengths down to even submicron size, and reduced the fabrication process by 10 steps compared with photolithography. Since the process was done in room temperature, there was no pattern shrinkage, transformation, and bending problem appeared. Also, it was possible to improve electric field mobility, to decrease contact resistance, to increase close packing of molecules by SAM, and to reduce threshold voltage by using a big dielectric.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.2
• /
• pp.29-40
• /
• 2018

Direct volume rendering (DVR) is a commonly used method to visualize inner structures in 3D volumetric datasets. However, conventional volume rendering on a 2D display lacks depth perception due to dimensionality reduction caused by ray casting. In this work, we investigate how emerging Virtual Reality (VR) can improve the usability of direct volume rendering. We developed real-time high-resolution DVR system in virtual reality, and measures the usefulness of volume rendering with improved depth perception via a user study conducted by 38 participants. The result indicates that virtual reality significantly improves the usability of DVR by allowing better depth perception.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.520-528
• /
• 2013

Makeup simulation is a tool that tests various makeup methods on a virtual digital face using input and display devices. Although several simulation systems supporting various makeup styles have been recently developed, most systems have many limitations on realistic skin representations because they use 2D facial images. We develope a realistic makeup simulation method which can control skin reflectance and roughness parameters. The method allows a user to simulate makeup applications while changing skin parameters using high-resolution facial data acquired by 3D scanners. Besides we use a point-based shape representation which enables simple and flexible 3D rendering, and provide a more realistic makeup simulation by applying different skin parameters on each part of the face.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1152-1160
• /
• 2003

Start The current paper proposes an improved HD(High Definition) monitor that can support a signal input with various resolutions. Due to the inadequate performance of the built-in digital PLL(Phase-locked Loop) of an ADC(Analog to Digital Converter) and poor tolerance of ADC ICs, there are problems in the stable processing of synchronization signals with various input signals. Accordingly, the proposed synchronization signal optimization technique regenerates the horizontal synchronization signal in the vertical blanking interval based on the regularity of the synchronization signal, i.e. the timing of the falling edge signal remains constant, thereby solving the above problem and minimizing the interference of the system. As a result, the proposed system can stabilize various synchronization signals with different resolution modes.