• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1571-1574
• /
• 2002

This paper describes a circuit and its operations of a programmable digital on-chip terminator designed with CMOS circuits which are used in high speed I/O interface. The on-chip terminator matches external reference resistor with the accuracy of ${\pm}$ 4.1％ over process, voltage and temperature variation. The digital impedance codes are generated in programmable impedance controller (PIC), and the codes are sent to terminator transistor arrays at input pads serially to reduce the number of signal lines. The transistor array is thermometer-coded to reduce impedance glitches during code update and it is segmented to two different blocks of thermometer-coded transistor arrays to reduce the number of transistors. The terminator impedance is periodically updated during hold time to minimize inter-symbol interferences.

• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.22-27
• /
• 2004

To handle the high level radioactive materials such a spent fuel, the master-slave manipulaters (MSM) are wide1y used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD model using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility. The 3D graphic simulator using the extermal input device of spare ball displays the movement of manipulator. To connect the exterral input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result show that the developed simulation system gives much-improved human interface characteristics and shows satisfactory reponse characteristics in terms of synchronization speed. This should be useful for the development of work`s education system in the environment.

• Journal of Korea Game Society
• /
• v.9 no.2
• /
• pp.13-22
• /
• 2009

Recently, mobile games are developed as the various genre and form with the hardware performance improvement and communication network speed increase of the mobile phone. But it shows the limit of the game material to be developed, because the mobile game has to play by using only the keypad handing of the mobile phone. In this research, 'Flip On / Off interface' and 'Microphone interface' were developed in order to utilize the physical device of the mobile phone as the game interface. 'Flip On / Off interface' and 'Microphone interface' have the advantage that there is no need to purchase a device as an additional interface with utilizing the hardware of the mobile phone itself and the progressing of a game is smooth in comparison with the keypad method of the pre-existence mobile game because the interface waiting time for a call response is short. Moreover, by applying to a commercializing game, the developed interface tests, we confirmed an availability at the commercialization inspection standards on mobile phone without the heap memory deficiency phenomenon to be smooth of an operation. Furthermore, in the result of usability evaluation accessability, reliability, and aesthetics were rated as 'high'. The results of this research reveal that the interface environment of the mobile game limited to a keypad will be able to be made with diversification.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.138-147
• /
• 2005

This paper presents a SPMSM(Surface-mounted Permanent Magnet Synchronous Motor) servo drive system using high performance TMS320F2812 DSP for the industrial application. The DSP(Digital Signal Processor) Controller enables an enhanced real time algorithm and cost-effective design intelligent for only exclusively motor drives which can be yield enhanced operation, fewer system components, lower control system cost, increased efficiency and high performance. The suggested system contain speed and current sensing circuits, SVPWM(Space Vector Pulse Width Modulation) and I/O interface circuit. The developed servo drive control system showns a good response characteristics results and high performance features in general purposed 400[w] machine. This system can achieve cost reduction and size minimization of controllers.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.223-226
• /
• 2004

This paper presents a feasibility study of an advanced IO board design for the next generation of low-earth orbit satellites. Advanced IO board design includes sensor interface, NO, D/A, Digital Module, Serial Module etc, and allows to process increasing data rates between IO board and CPU board. The higher data rate involved in modem IO board additionally introduce issues such as noise, fault tolerance, command and data handling, limited pin count and power consumption problems. The experience in KOMPSAT-l and 2 program with this kind of problems resulted in using SMCS chip set, a high speed serial link technology based on IEEE-1355 (Space Wire Protocol) (ESA-ESTEC 2003, Parkes 1999), as a standard for next generation of satellite IO board design.

• Information and Communications Magazine
• /
• v.11 no.4
• /
• pp.62-70
• /
• 1994

This paper discusses the LAN interface technics physically applicable to the ISDN exchange system through frame relay without changing of the basic exchange architecture. To ensure the success of frame relaying, it's interworking with the existing X.25 services is very imported, and for this purpose both X.75 and 1.122-based interworking alternative must be considered. Definition required to frame relay, interconnection of remote bridge and ways to design the Frame Handler carrying a frame realying in the ISDN node was introduced here. Subsequently, alternatives using the X.25 and X.75 or 1.122 as well as interconnection mechanism LAN and ISDN for the LAN interface and LAN and/or LAN interface and ISDN through frame relay was individually introduced. Through frame relay applications in the major countries, the achievement of high speed frame relaying service to the LAN was introduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1000-1002
• /
• 2005

In the Bluetooth piconet in which up to 7 slave devices can be connected simultaneously at one network instance, the wireless data expected to be sent over to the RF interface should be sliced by the unit of 1 micrometer, which is a requirement in the specification of the Bluetooth version 1.1. In this contribution, we have designed a digital low-pass filter which is able to slice the unstable analog signal fed from the RF interface to the Baseband, by the uniform unit of 1 micrometer, and is also capable of removing the possible noise which can be caused by the analog circuit system. The low-pass filter operated well in the various modes of the Bluetooth RF embedded Baseband chip such as sleep mode, normal mode, and high-speed mode at 12MHz, 24MHz, and 48MHz respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.556-563
• /
• 2007

The current trend of low cost ultra-small satellites is to utilize Commercial Off the Shelf (COTS) parts to save cost, and accordingly, Command and Data Handling (C&DH) that operates the satellite and collects/processes the data is also designed and developed around commercial controllers. However, functionalities of commercial controllers are limited according to the specs outlined by the manufacturer. In order for the commercial controllers to be used for satellites where variety of interfaces is required, a separate interface circuit is required. Therefore, a Multi Digital Data Control System (MDDCS) using Field Programmable Gate Array (FPGA) has been developed in order to expand multiple digital interfaces that are not supported by the commercial controller, and also to compensate for SEU. This has been implemented on Actel A3P1000 using Very High Speed Integrated Circuits Hardware Description Language (VHDL).

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1014-1024
• /
• 1998

This paper describes the implementation of the asymmetric digital subscriber lines(ADSL) interface device function in ATM networks. The function of the ADSL interface devices has been achieved within a type of the ATM switch standard board. The board connected with the ADSL modem process the ATM physical layer function of data transfering asymmetrically. For the implementation of the board, we have modeled a worst case of the subscriber line conditions from the existing investigated results on the impairments such as crosstalk, impulse noise, and some important noises loaded to subscrber line. Also we have performed assessment tests in the full test environments. We have found that the board is met to the standard specification in condition with various test loops and the worst line conditions using an ADLS line simulator. And we confirmed that high-speed multimedia services are performed well with the ATM switch and the ADSL subscriber line. It is evaluted that this board can be used for high quality ADSL services through existed copper subscriber line.

• Journal of Digital Contents Society
• /
• v.6 no.2
• /
• pp.131-135
• /
• 2005

Nowadays, the demand for the wireless technology has gradually increased to support the services of high speed wired internet and also the interest of a mobile terminal convergence has increased. In the next generation, the mobile terminal could merge with the celluar phone, wireless LAN, portable internet, digital multimedia brodcasting, mobile game and sensor(smart-tag and biometrics) through the unified single user interface. Moreover, the system is supported to multi-mode at difference networks, which have variable functions and high performance for available service. Inthis paper, we investigate the minimum requirements and the core technologies of the next generation mobile terminals.