• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.215-217
• /
• 2007

Recently, the demand for high definition TV is being increased by beginning of the digital broadcasting. The higher resolution of PDP is, the longer addressing time become, then, the sustain period for display image decreases. Because of the reason, dual-scan method which synchronously write information of an image on top and bottom of the screen is used for the high definition PDP. However, as the price competition of PDP becomes severe, we can`t avoid turning to a single-scan method which uses only a half of an expensive address IC. Accordingly, the sustain period becomes much shorter than prior method. In case of XGA level, it is impossible to display, eventually. In this paper, we are going to prove usefulness by realizing negative reset waveform and the driving circuit for high speed addressing.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.67-71
• /
• 2011

Existing face detection systems, which are used for digital door locks, digital cameras, video surveillance systems, and so on, are software-based implementation for relatively low level resolution images. Therefore, in this case, there are difficulties in detecting faces in a real-time fashion due to the increasing amount of operational processing as well as in allowing the requirements of face detections for HD(High Definition) resolutions. A hardware approach is necessary to efficiently find faces for HD images in real-time embedded systems. This paper proposes and implements a hardware architecture for an LBP(Local Binary Pattern) operation which is a time-consuming part as one of preprocessing steps for face detection. The hardware architecture proposed in this research has been implemented and tested with a FPGA(Field Programmable Gate Array) chip, and shown that the approach guarantees efficient face detection for HD images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.383-390
• /
• 2020

Car-mounted MMS (Mobile Mapping System) is the most effective tool for mapping of high definition road maps(HD Map). The MMS is composed of various sensor combinations, and the manufacturing methods and processing software are different for each manufacturer, performance cannot be predicted only by the specifications of the parts. Therefore, it is necessary to judge whether each equipment is suitable for mapping through performance evaluation, and facilities for periodic performance evaluation. In this paper, we explained the MMS performance evaluation facilities built at the SOC Evaluation Research Center of Korea Institute of Civil Engineering and Building Technology and analyzed the conditions that the evaluation facilities should have through a literature survey and field tests.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.72-78
• /
• 2008

Although the H.264 video coding scheme is popular, it is not efficient for high-definition (HD) video coding because the size of its macroblock is relatively small for the HD video resolution. In this paper, we propose a new intra coding scheme based on the enlarged macroblock size. For the luminance component, intra $4{\times}4$ prediction and intra $16{\times}16$ prediction in H.264 are scaled into intra $8{\times}8$ prediction and intra $32{\times}32$ prediction, respectively. For the chrominance components, intra $8{\times}8$ prediction is extended to intra $16{\times}16$ prediction. Along with the $8{\times}8$ basic coding block size, an $8{\times}8$ integer discrete cosine transform (DCT) is used. Experimental results show that the proposed algorithm improves coding efficiency of the intra coding for HD video: PSNR gain by 0.23dB and bit-rate reduction by 5.32% on average.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.411-418
• /
• 2016

Digital broadcast environment led to the emergence of UHDTV following HDTV. The demands for realistic images which are created with the use of UHDTV have been applied to various fields. Of various application methods, multiplanar imaging, which is used to display high definition image contents after multiple HD or UHD displays are connected with each other up and down, and left and right, is often applied to display images and the advertising market. Today, the firms that make high-definition multiplanar images mostly use their independently developed program. Therefore, it costs higher than other general works. For the reason, multiplanar image contents are mostly made in the way of enlarging HD images over 2 to 5 times. In this experiment, the software application widely known for UHDTV based multiplanar images is applied to test a method of implementing UHD panoramic realistic images without quality degradation.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.147-151
• /
• 2008

Since the first HDV(High Definition Video) camcoder, HDR-FX1 with 1080i resolution, had been launched at 2004, the image capture and record with HD resolution have been possible by the various types of camcoder and recorder which can support the HDV format. At a present day, a non-linear editing system, which is composed of only one computer, can capture, edit and export the image with HDV format. The HDV format has the same class of resolution with HD and the same data transfer bit rate of DV(Digital Video). Additionally, the image with HDV format can be recorded in 6mm DV cassette tape. It is possible because the HDV format uses the concept of Long GOP(Gorup of pictures) method for its compression. In this paper, the characteristic feature of HDV format, the essential factors in editing with HDV format and the concept of Long GOP method for its compression have been studied for the way of effective HDV editing.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.133-140
• /
• 2011

In this paper, a deformation measurement technology for nuclear fuel rods is proposed. The deformation measurement system includes a high-definition CMOS image sensor, a lens, a semiconductor laser line beam marker, and optical and mechanical accessories. The basic idea of the proposed deformation measurement system is to illuminate the outer surface of a fuel rod with a collimated laser line beam at an angle of 45 degrees or higher. For this method, it is assumed that a nuclear fuel rod and the optical axis of the image sensor for observing the rod are vertically composed. The relative motion of the fuel rod in the horizontal direction causes the illuminated laser line beam to move vertically along the surface of the fuel rod. The resulting change of the laser line beam position on the surface of the fuel rod is imaged as a parabolic beam in the high-definition CMOS image sensor. An ellipse model is then extracted from the parabolic beam pattern. The center coordinates of the ellipse model are taken as the feature of the deformed fuel rod. The vertical offset of the feature point of the nuclear fuel rod is derived based on the displacement of the offset in the horizontal direction. Based on the experimental results for a nuclear fuel rod sample with a formation of surface crud, an inspection resolution of 50 ${\mu}m$ is achieved using the proposed method. In terms of the degree of precision, this inspection resolution is an improvement of more than 300% from a 150 ${\mu}m$ resolution, which is the conventional measurement criteria required for the deformation of neutron irradiated fuel rods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.638-641
• /
• 2016

UHD(Ultra High Definition) broadcasting is an attractive next-generation service of realistic broadcasting that enables you to feels like listening on the spot in ultra-high definition resolution. In addition, the test broadcasting run by UHD broadcasting agencies and UHDTV terminal launch could herald the full-scale UHD broadcasting era. However, in order that UHD broadcasting will be activated, the function of conditional access control and information protection through which we can on pay per view watch the programs of subscriber preference from the channels of various and subdivided genres is essential. To provide a technical foundation for these features and to achieve the UHD TV transition early, determining technology development & standardization strategy through the analysis of the key protection technologies is required In this paper, we propose standardization technologies which our country can lead and present a long-term driving directions by analyzing UHD broadcasting technology & test broadcasting trends and content protection technology & standardization trends.

• Journal of Industrial Convergence
• /
• v.18 no.6
• /
• pp.33-39
• /
• 2020

The multi-screen image system could make the audiences appreciate contents without special devices by expansively composing the images played on a single screen to many facets suitable for the use, which could provide the great immersiveness to the audiences. Based on the recent interest in realistic images, it is produced as films through the multi-projection technology such as Screen X or Escape, and it is developed into the media that could deliver stories and information. Also, the size of display tends to gradually get larger while the image quality is improved to high definition. Thus, the development is accelerated in the form of Digital Signage that could play the high definition image contents by solidly composing many HD or UHD display screens. Moreover, through the convergence of digital technologies, it is developed into the higher value-added industry that could have two-way communication. This study aims to understand the developmental history of multi-screen image from 1950 to the present, technical analysis, and the production method, and then to research how to minimize the image degradation when playing the contents, in various platforms using the multi-screen image.

• Journal of the Korean School Mathematics Society
• /
• v.4 no.2
• /
• pp.135-142
• /
• 2001

The selected questions for this study was their conversation in problem solving way of working together. To achieve its purpose researcher I chose more detail questions for this study as follows. $\circled1$ What is the difference of strategy according to its level \ulcorner $\circled2$ What is the mathematical ability difference in problem solving process concerning its level \ulcorner This is the result of the study $\circled1$ Difference in the strategy of each class of students. High class-high class students found rules with trial and error strategy, simplified them and restated them in uncertain framed problems, and write a formula with recalling their theorem and definition and solved them. High class-middle class students' knowledge and understanding of the problem, yet middle class students tended to rely on high class students' problem solving ability, using trial and error strategy. However, middle class-middle class students had difficulties in finding rules to solve the problem and relied upon guessing the answers through illogical way instead of using the strategy of writing a formula. $\circled2$ Mathematical ability difference in problem solving process of each class. There was not much difference between high class-high class and high class-middle class, but with middle class-middle class was very distinctive. High class-high class students were quick in understanding and they chose the right strategy to solve the problem High class-middle class students tried to solve the problem based upon the high class students' ideas and were better than middle class-middle class students in calculating ability to solve the problem. High class-high class students took the process of resection to make the answer, but high class-middle class students relied on high class students' guessing to reconsider other ways of problem-solving. Middle class-middle class students made variables, without knowing how to use them, and solved the problem illogically. Also the accuracy was relatively low and they had difficulties in understanding the definition.