• Bulletin of the Korean Chemical Society
• /
• v.29 no.9
• /
• pp.1729-1731
• /
• 2008

Colloidal solutions of crystalline PbSe nanoparticles have been synthesized by hot solution chemical process using PbO in oleic acid and tributylphosphine (TBP) bonded selenium. The use of TBP as a capping agent along with oleic acid gives a very good yield (around 10% at 180 ${^{\circ}C}$) with an average diameter of particle of about < 6.6 nm. The effects of temperature on size and production yield of PbSe quantum dots are studied. Xray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and UV/VIS/NIR absorption spectroscopy were used to characterize the samples.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.132-136
• /
• 2018

Core/shell CdSe/ZnS quantum dots (QDs) are synthesized by a microfluidic reactor-assisted continuous reactor system. Photoluminescence and absorbance of synthesized CdSe/ZnS core/shell QDs are investigated by fluorescence spectrophotometry and online UV-Vis spectrometry. Three reaction conditions, namely; the shell coating reaction temperature, the shell coating reaction time, and the ZnS/CdSe precursor volume ratio, are combined in the synthesis process. The quantum yield of the synthesized CdSe QDs is determined for each condition. CdSe/ZnS QDs with a higher quantum yield are obtained compared to the discontinuous microfluidic reactor synthesis system. The maximum quantum efficiency is 98.3% when the reaction temperature, reaction time, and ZnS/CdSe ratio are $270^{\circ}C$, 10 s, and 0.05, respectively. Obtained results indicate that a continuous synthesis of the Core/shell CdSe/ZnS QDs with a high quantum efficiency could be achieved by isolating the reaction from the external environment.

• Journal of Ginseng Research
• /
• v.34 no.4
• /
• pp.274-281
• /
• 2010

This experiment was conducted to examine ginseng lines resistant and susceptible to high-temperature injury and to investigate characteristics of the selected lines: leaf burning phenomenon, chlorophyll content, quantum yield, and maximum light interception rate. The leaf burning phenomenon incidence rates of the resistant lines Yunpoong, high-temperature injury resistance (HTIR)1, HTIR2, and HTIR3 were low: 5.8%, 3.6%, 4.0%, and 1.9%, respectively. Resistance of the susceptible lines Chunpoong, high-temperature injury susceptible (HTIS)1, and HTIS2 was high: 58.5%, 23.2%, and 21.7%, respectively. The chlorophyll content (SPAD value) of the resistant lines Yunpoong, HTIR1, HTIR2, and HTIR3, which were exposed to high temperatures and intense light, remained as high at 24.8, 27.9, 24.9, and 30.6, respectively, but that of the susceptible lines Chunpoong, HTIS1, and HTIS2 was low at 21.0, 21.1, and 20.1, respectively. During the summer season, the quantum yield of the resistant lines (Yunpoong, HTIR1, HTIR2, and HTIR3) changed little, but that of the susceptible lines (Chunpoong, HTIS1, and HTIS2) changed dramatically. The maximum light interception rate (Fm/Fv value) for the resistant lines (Yunpoong, HTIR1, HTIR2, and HTIR3) was as high as 0.848, 0.794, 0.805, and 0.813, respectively, while that of the susceptible lines (Chunpoong, HTIS1, and HTIS2) was 0.678, 0.642, and 0.717, respectively. Based on these results, the high-temperature injury-resistant lines seemed to be less susceptible to high light, even at high temperatures. Future studies on red ginseng quality and its active ingredients in resistant ginseng lines and field experimentation will be conducted to verify the potential of the resistant lines.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.531-531
• /
• 2012

So many groups have been researching the green quantum dots such as InP, InP/ZnS for overcoming the semiconductor nanoparticles composed with heavy metals like as Cd and Pb so on. In spite of much effort to keep up CdSe quantum dots, it does not reach the good properties compared with CdSe/ZnS quantum dots. This quantum dot has improved its properties through the generation of core/shell CdSe/ZnS structure or core/multi-shell structures like as CdSe/CdS/ZnS and CdSe/CdS/ CdZnS/ZnS. In this research, we try to synthesize the InP multi-shell structure by the successiveion layer absorption reaction (SILAR) in the one pot. The synthesized multi-shell structure has improved quantum yield and photo-stability. To generate white light, highly luminescent InP multi-shell quantum dots were mixed with yellow phosphor and integrated on the blue LED chip. This InP multi-shell improved red region of the LEDs and generated high CRI.

• Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.85-102
• /
• 2023

Background: Ecophysiological characteristics of Rosa rugosa were analyzed under different environmental factors from May to October 2022. Photosynthesis, chlorophyll fluorescence, chlorophyll content, leaf water content (LWC), osmolality, carbohydrate content, and total ion content were measured to compare the physiological characteristics of R. rugosa at two study sites (i.e., in large pots and in the Goraebul coastal sand dune area). Results: When R. rugosa was exposed to high temperatures, photosynthetic parameters including net photosynthetic rate (P_N) and stomatal conductance (g_s) in both experiment areas declined. In addition, severe photoinhibition occurs when R. rugosa is continuously exposed to high photosynthetically active radiation (PAR), and because of this, relatively low Y(II) (i.e., the quantum yield of photochemical energy conversion in photosystem II [PSII]) and high Y(NO) (i.e., the quantum yield of non-regulated, non-photochemical energy loss in PSII) in the R. rugosa of the pot were observed. As the high Y(NPQ) (i.e., the quantum yield of regulated non-photochemical energy loss in PSII) of R. rugosa in the coastal sand dune, they dissipated the excessed photon energy through the non-photochemical quenching (NPQ) mechanism when they were exposed to relatively low PAR and low temperature. Rosa rugosa in the coastal sand dune has higher chlorophyll a and carotenoid content. The high chlorophyll a + b and low chlorophyll a/b ratios seemed to optimize light absorption in response to low PAR. High carotenoid content played an important role in NPQ. As a part of the osmotic regulation in response to low LWCs, R. rugosa exposed to high temperatures and continuously high PAR used soluble carbohydrates and ions to maintain high osmolality. Conclusions: We found that F_v/F_m was lower in the potted plants than in the coastal sand dune plants, indicating the vulnerability of R. rugosa to high temperatures and PAR levels. We expect that the suitable habitat range for R. rugosa will shrink and move to north under climate change conditions.

• ALGAE
• /
• v.24 no.2
• /
• pp.93-104
• /
• 2009

Imaging-PAM fluorometry was used to assess the chlorophyll a fluorescence parameter ${\Phi}_{PSII}$ (effective quantum yield) in Frcus vesiculosus. F. disttchus. ssp. distichus and AscophyIIum nodosum. The objective was to show variadon in fluorescence yield associated with age and frond organ, and to illustrate the spatial scales at which photosynthetic parameters vary on fucoid thalli. In addition, our species represented taxa in different but related genera, species with different ecoloeies (rock pool and non rock pool species), morphologies (with and without air bladders) and longevities (several to 20 or more years). A further objective was to determine the extent to which photosynthetic parameters reflected these differences- Effective quantum yield declined substantially with age in F. vesiculosus and F. distichus ssp. distichus, whereas ${\Phi}_{PSII}$ in A. nodosum was maximal after three years. In A. nodosum ${\Phi}_{PSII}$ was still high in branch segments at least seven years old. Older branches of A. nodosum showed relatively higher and more homogeneous photosynthetic capacity relative to Fucus species. Surfaces of air bladders in A. nodosum and F. vesicu- losus had ${\Phi}_{PSII}$ that was not significantly different from the highest rates, achieved in these species. The heterogene- ity of photosynthetic efficiency is consistent with morphological and developmental differences among the species and their ecology. in particular the longevity of A. nodosum fronds.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.449-469
• /
• 2017

The development of quantum dots (QDs) has had a significant impact on various applications, such as solar cells, field-effect transistors, and light-emitting diodes (LEDs). Through successful engineering of the core/shell heterostructure of QDs, their photoluminescence (PL) quantum yield (QY) and stability have been dramatically enhanced. Such high-quality QDs have been regarded as key fluorescent materials in realizing next-generation display devices. Particularly, electrically driven (or electroluminescent, EL) QD light-emitting diodes (QLED) have been highlighted as an alternative to organic light-emitting diodes (OLED), mostly owing to their unbeatably high color purity. Structural optimizations in QD material as well as QLED architecture have led to substantial improvements of device performance, especially during the past decade. In this review article, we discuss QDs with various semiconductor compositions and describe the mechanisms behind the operation of QDs and QLEDs and the primary strategies for improving their PL and EL performances.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• Journal of Biomedical Engineering Research
• /
• v.30 no.2
• /
• pp.122-128
• /
• 2009

Cancer serum biomarkers have advanced our ability to more accurately predict tumor classification, prognostic/metastatic potential, and response potential to novel chemotherapies. Serum amyloid A (SAA) and Vascular endothelial growth factor (VEGF) have potential utility as a serum biomarker for lung cancer. Quantum dots, nanometer-sized crystals, have a high quantum yield, sensitivity, and pronounced photostability. The properties of quantum dots can be efficiently applied to the detection of serum biomarkers in immunoassays as fluorescent probe. We used quantum dots as fluorescent probes in immunoassays and attempted to detect serum amyloid A and vascular endothelial growth factor as serum biomarkers of lung cancer. This fluorescence immunoassay based on the properties of quantum dots is applicable to the detection of serum biomarkers for lung cancer. The fluorescence immunoassay with quantum dots should allow the efficient and specific detection of serum amyloid A (SAA) for the possible diagnosis of lung cancer.

• Korean Journal of Materials Research
• /
• v.31 no.9
• /
• pp.496-501
• /
• 2021

Metal halide perovskite nanocrystals, due to their high absorption coefficient, high diffusion length, and photoluminescence quantum yield, have received significant attention in the fields of optoelectronic applications such as highly efficient photovoltaic cells and narrow-line-width light emitting diodes. Their energy band structure can be controlled via chemical exchange of the halide anion or monovalent cations in the perovskite nanocrystals. Recently, it has been demonstrated that chemical exfoliation of the halide perovskite crystal structure can be achieved by addition of organic ligands such as n-octylamine during the synthetic process. In this study, we systematically investigated the quantum confinement effect of methylammonium lead bromide (CH₃NH₃PbBr₃, MAPbBr₃) nanocrystals by precise control of the crystal thickness via chemical exfoliation using n-octylammonium bromide (OABr). We found that the crystalline thickness consistently decreases with increasing amounts of OABr, which has a larger ionic radius than that of CH₃NH₃⁺ ions. In particular, a significant quantum confinement effect is observed when the amounts of OABr are higher than 60 %, which exhibited a blue-shifted PL emission (~ 100 nm) as well as an increase of energy bandgap (~ 1.53 eV).