• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.175-185
• /
• 2020

Three-dimensional registration is a process of matching data with or without a coordinate system to a reference coordinate system, which is used in various fields such as the absolute orientation of photogrammetry and data combining for producing precise road maps. Three-dimensional registration is divided into a method using points and a method using linear features. In the case of using points, it is difficult to find the same conjugate point when having different spatial resolutions. On the other hand, the use of linear feature has the advantage that the three-dimensional registration is possible by using not only the case where the spatial resolution is different but also the conjugate linear feature that is not the same starting point and ending point in point cloud type data. In this study, we proposed a method to determine the scale and the three-dimensional translation after determining the three-dimensional rotation angle between two data using quaternion to perform three-dimensional registration using linear features. For the verification of the proposed method, three-dimensional registration was performed using the linear features constructed an indoor and the linear features acquired through the terrestrial mobile mapping system in an outdoor environment. The experimental results showed that the mean square root error was 0.001054m and 0.000936m, respectively, when the scale was fixed and if not fixed, using indoor data. The results of the three-dimensional transformation in the 500m section using outdoor data showed that the mean square root error was 0.09412m when the six linear features were used, and the accuracy for producing precision maps was satisfied. In addition, in the experiment where the number of linear features was changed, it was found that nine linear features were sufficient for high-precision 3D transformation through almost no change in the root mean square error even when nine linear features or more linear features were used.

• Journal of Genetic Medicine
• /
• v.8 no.2
• /
• pp.119-124
• /
• 2011

Purpose: Supernumerary marker chromosome (SMC) could be associated with various phenotypic abnormalities based on the chromosomal origin of SMCs. The present study aimed to determine the genomic contents of SMCs using chromosomal microarray and to analyze molecular cytogenetic characterizations and clinical phenotypes in patients with SMCs. Materials and Methods: Among patients with SMCs detected in routine chromosomal analysis, SMCs originating from chromosome 15 were excluded from the present study. CGH-based oligonucleotide chromosomal microarray was performed in 4 patients. Results: The chromosomal origins of SMCs were identified in 3 patients. Case 1 had a SMC of 16.1 Mb in 1q21.1-q23.3. Case 2 showed 21 Mb gain in 19p13.11-q13.12. Case 3 had a 4.5 Mb-sized SMC rearranged from 2 regions of 2.5 Mb in 22q11.1-q11.21 and 2.0 Mb in 22q11.22-q11.23. Conclusion: Case 1 presented a wide range of phenotypic abnormalities including the phenotype of 1q21.1 duplication syndrome. In case 2, Asperger-like symptoms are apparently related to 19p12-q13.11, hearing problems and strabismus to 19p13.11 and other features to 19q13.12. Compared with cat-eye syndrome type I and 22q11.2 microduplication syndrome, anal atresia in case 3 is likely related to 22q11.1-q11.21 while other features are related to 22q11.22-q11.23. Analyzing SMCs using high-resolution chromosomal microarray can help identify specific gene contents and to offer proper genetic counseling by determining genotype-phenotype correlations.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.6
• /
• pp.570-575
• /
• 2005

Introduction : Diffuse interstitial lung diseases (DILD) comprise of a large group of lung diseases with diverse etiologies. They are classified into four categories based on the etiology and pathological findings. In Korea, epidemiological data on DILD has never been reported in a prospective manner. Method : From May 2002 to April 2004, total 487 patients with DILD were prospectively registered at Samsung Medical Center. The prospective observational analysis of the etiologies, its classification based on 2002 ATS/ERS (American Thoracic Society/European Respiratory Society) guidelines, as well as diagnostic tests and the retrospective analysis of the treatment modalities were carried out. Any infectious and malignant causes were excluded. Results : 1) The patients were classified into idiopathic interstitial pneumonia (IIP) in 269 patients (55.2%), known causes of DILD in 168 patients (34.5%), sarcoidosis in 27 patients (5.5%), other forms of DILD in 14 patients (2.9%), and undetermined DILD in 9 patients (1.9%). 2) The diagnostic test showed that most patients had undergone chest high resolution computed tomography (HRCT) and pulmonary function test (PFT) (97%, 89%). Transbronchial lung biopsy (TBLB) and surgical lung biopsy (SLB) were performed in limited patients (38%, 29%). 3) Among 269 patients with IIP, 220 (82%) had idiopathic pulmonary fibrosis (IPF) while 23 (9%) had nonspecific interstitial pneumonia. SLB was carried out in 36% of patients with IIP. 4) Symptomatic supportive care was given to 67% of IPF, but specific medical treatment including corticosteroids was administered to 89% of non-IPF patients. Conclusion : A nationwide registry of DILD patients is required to determine the annual incidence, etiology, and practice pattern of diagnosis and treatment in Korea.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.86-96
• /
• 2006

Ecoclimap-1, a new complete surface parameter global database at a 1-km resolution, was previously presented. It is intended to be used to initialize the soil-vegetation- atmosphere transfer schemes in meteorological and climate models. Surface parameters in the Ecoclimap-1 database are provided in the form of a per-class value by an ecoclimatic base map from a simple merging of land cover and climate maps. The principal objective of this ecoclimatic map is to consider intra-class variability of life cycle that the usual land cover map cannot describe. Although the ecoclimatic map considering land cover and climate is used, the intra-class variability was still too high inside some classes. In this study, a new strategy is defined; the idea is to use the information contained in S10 NDVI SPOT/VEGETATION profiles to split a land cover into more homogeneous sub-classes. This utilizes an intra-class unsupervised sub-clustering methodology instead of simple merging. This study was performed to provide a new ecolimatic map over Northeast Asia in the framework of Ecoclimap-2 global database construction for surface parameters. We used the University of Maryland's 1km Global Land Cover Database (UMD) and a climate map to determine the initial number of clusters for intra-class sub-clustering. An unsupervised classification process using six years of NDVI profiles allows the discrimination of different behavior for each land cover class. We checked the spatial coherence of the classes and, if necessary, carried out an aggregation step of the clusters having a similar NDVI time series profile. From the mapping system, 29 ecosystems resulted for the study area. In terms of climate-related studies, this new ecosystem map may be useful as a base map to construct an Ecoclimap-2 database and to improve the surface climatology quality in the climate model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.875-884
• /
• 2000

Sea fog/stratus is very difficult to detect because of the characteristics of air-sea interaction and locality ,and the scantiness of the observed data from the oceans such as ships or ocean buoys. The aim of our study develops new algorism for sea fog detection by using Geostational Meteorological Satellite-5(GMS-5) and suggests the technics of its continuous detection. In this study, atmospheric synoptic patterns on sea fog day of May, 1999 are classified; cold air advection type(OOUTC, May 10, 1999) and warm air advection type(OOUTC, May 12, 1999), respectively, and we collected two case days in order to analyze variations of water vapor at Osan observation station during May 9-10, 1999.So as to detect daytime sea fog/stratus(OOUTC, May 10, 1999), composite image, visible accumulated histogram method and surface albedo method are used. The characteristic value during day showed A(min) .20% and DA < 10% when visible accumulated histogram method was applied. And the sea fog region which is detected is similar in composite image analysis and surface albedo method. Inland observation which visibility and relative humidity is beneath 1Km and 80%, respectively, at OOUTC, May 10,1999; Poryoung for visble accumulated histogram method and Poryoung, Mokp'o and Kangnung for surface albedo method. In case of nighttime sea fog(18UTC, May 10, 1999), IR accumulated histogram method and Maximum brightness temperature method are used, respectively. Maxium brightness temperature method dectected sea fog better than IR accumulated histogram method with the charateristic value that is T_max < T_max_trs, and then T_max is beneath 700hPa temperature of GDAPS(Global Data Assimilation and Prediction System). Sea fog region which is detected by Maxium brighness temperature method was similar to the result of National Oceanic and Atmosheric Administratio/Advanced Very High Resolution Radiometer (NOAA/AVHRR) DCD(Dual Channel Difference), but usually visibility and relative humidity are not agreed well in inland.

• Journal of the Korean Geographical Society
• /
• v.38 no.2
• /
• pp.184-205
• /
• 2003

Sustainable Development(SD) is an important concept for the future of the coastal area, and for development of fishing villages. Since 1992 UN Conference on Environment and Development in Rio de Janeiro many governments and local authorities throughout the world have been engaged in preparing and implementing $\ulcorner$Agenda 21$\lrcorner$. Many projects which previously would have been identified as environmental protection are now presented under the banner of sustainable development. Integrated Coastal Management (ICM) is an extension of sustainable development. ICM was presented as a framework for resolution of coastal use conflicts. The aim of the present paper is to assess sustainable development potential of fishing villages in Cheonsu Bay Region according to implementation of ICM. Cheonsu Bay Region was known as one of the productive fishing grounds and Cheonsu Bay Region preserved unique characteristics of traditional fishing villages. But this region is now experiencing many changes through the massive reclamation projects like Seosan A B Project. After a brief overview of concepts and history of SD and ICM, the reclamation process and its impacts on both fishery and fishing communities in Cheonsu Bay Region are discussed. According to their changing environmental and socio-economic characteristics after the reclamation, ca 35 representative coastal villages in this region can be classified into 5 types. Many coastal villages shows diversity in their economic activities, as tourism and recreation function becomes more and more important in this region. In present-day Cheonsu Bay Region, it is possible to differentiate fishing village cooperatives(FVO) with high potential of sustainable fishery development, FVOs with medium potential, FVOs with low potential on the basis of 14 selected indicators.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2015

Purpose Whole body bone scan, which makes up a largest percentage of nuclear medicine tests, has high sensitivity and resolution about bone lesion like osteomyelitis, fracture and the early detection of primary cancer. However, any standard for valuation has not yet been created except minimum factor. Therefore, in this study, we will analysis the method which show a quantitative evaluation index in whole body bone scan. Materials and Methods This study is conducted among 30 call patients, who visited the hospital from April to September 2014 with no special point of view about bone lesion, using GE INFINIA equipment. Enumerated data is measured mainly with patient's whole body count and lumbar vertabrae, and the things which include CNR (Contrast to Noise ratio), SNR (Signal to Noise ratio) are calculated according to the mean value signal and standard deviation of each lumbar vertabrae. In addition, the numerical value with the abdominal thickness is compared to each value by the change of scan speed and tissue equivalent material throughout the phantom examination, and compared with 1hours deleyed value. Completely, on the scale of ten, 2 reading doctors and 5 skilled radiologists with 5-years experience analysis the correlation between visual analysis with blind test and quantitative calculation. Results The whole body count and interest region count of patients have no significant correlation with visual analysis value throughout the blind test(P<0.05). There is definite correlation among CNR and SNR. In phantom examination, Value of the change was caused by the thickness of the abdomen and the scan speed. And The poor value of the image in the subject as a delay test patient could be confirmed that the increase tendency. Conclusion Now, a standard for valuation has not been created in whole body bone scan except minimum factor. In this study, we can verify the significant correlation with blind test using CNR and SNR and also assure that the scan speed is a important factor to influence the imagine quality from the value. It is possible to be some limit depending on the physiology function and fluid intake of patient even if we progress the evaluation in same condition include same injection amount, same scan speed and so on. However, that we prove the significant evaluation index by presenting quantitative calculation objectively could be considered academic value.

• Journal of Food Hygiene and Safety
• /
• v.33 no.2
• /
• pp.124-130
• /
• 2018

The Ministry of Food and Drug Safety (MFDS) is amending its test methods for the use of health functional foods (dietary food supplement), in order to establish regulatory standards and specifications in Korea. In this regard, we continue to pursue and perform our research on the analytical method development for the items being researched and reviewed. In this study, we have developed a sensitive and selective test method that could simultaneously separate and determinate six major bioactive flavonolignans in silymarin, which are based on the use of a liquid chromatographic-tandem mass spectrometry (LC-MS/MS). The standard calibration curves presented a linearity effect with the correlation coefficient ($r^2$) > 0.999. The limits of detection (LODs) and limits of quantitation (LOQs) were in the range of $0.3{\sim}9.0{\mu}g/L$ and $0.8{\sim}27.3{\mu}g/L$, respectively. The recovery results ranged between 96.2~98.6% at 3 different concentration levels, and its relative standard deviations (RSDs) were less than 5% as noted in this study. The proposed analytical method was characterized with a noted high resolution of the individual silymarin constituents, and the assay was fully validated as well. Our research can provide a significant scientific evidence that can be useful to amend the silymarin test method for the Health Functional Food Code.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.187-195
• /
• 2017

TheraCal LC, a new light-cured, resin-modified calcium silicate-filled base/liner material, has been introduced as a pulpotomy agent. The aim of this study was to evaluate the capacity of hard tissue formation and pulpal response after pulpotomy with TheraCal LC. Twenty-two 9-week-old male rats were anesthetized, cavities were prepared in maxillary first molars and pulps were capped with formocresol (FC), mineral trioxide aggregate (MTA), and TheraCal LC. Specimens obtained from rats were scanned using a high-resolution micro CT system. The specimens were prepared and evaluated histologically, and immunofluorescence assay was performed to assess the dentin matrix protein-1 (DMP-1) expression. On micro CT analysis, the MTA and TheraCal LC groups showed thicker hard tissue formation than the FC group. On hematoxylin and eosin (H&E) staining, MTA and TheraCal LC groups showed dentine bridge formation with vital pulp beneath the materials. On immunofluorescence analysis, DMP-1 was highly expressed in the TheraCal LC group compared to the FC group. TheraCal LC showed similar capacity to form hard tissue as MTA when it was used as a pulpotomy agent. Because of its good manipulation and faster setting time compared to MTA, TheraCal LC could be considered as a good alternative to MTA.