• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.199-204
• /
• 2004

Height has become one of the most important factors to determine the pulmonary function test index, and there is a high correlation between them, so that they have been utilized for evaluating pulmonary function test predictive value or nomogram. Therefore, we have tried to find out that difference and if there is any correlation and linear relationship between height and forced expiratory flow curve. There were a total of 163 subjects, male 93 and female 70. This study was done at the Department of Pulmonary Function Test of Jeon-Ju Presbyterian Hospital and we measured the index at the forced expiratory flow curve of FVC, $FEV_{1.0}$, $FEV_{1.0}$/FVC, $FEF_{25-75%}$, and $FEF_{200-1200m{\ell}}$. When we subjected the group of height more than 160cm, there were gradual increments at FVC(p<0.001), $FEV_{1.0}$(p<0.001), $FEF_{25-75%}$(p<0.05) and $FEF_{200-1200m{\ell}}$(p<0.001), but no changes at $FEV_{1.0}$/FVC in terms of forced expiratory flow curve index. We have analyzed the relationship between height and forced expiratory flow curve, there was a close relationship at FVC(r=0.670, p<0.01), $FEV_{1.0}$(r=0.491, p<0.01), $FEF_{25-75%}$ (r=0.175, p<0.05) and $FEF_{200-1200m{\ell}}$(r=0.370, p<0.01) but there was reciprocal relationship at $FEV_{1.0}$/FVC(r=-0.215, p<0.01). We have tried simple regression analysis to see if height affects forced expiratory flow curve index as a sector, and the result was $FVC(\ell)=0.0642{\times}height(cm)-7.2978$(p<0.01, $R^2=0.449$), $FEV_{1.0}(\ell)=0.0407{\times}height(cm)-4.2774$ (p<0.01, $R^2=0.2411$), $FEV_{1.0}/FVC(%)=-0.2892{\times}height(cm)+121.44$(p<0.01, $R^2=0.0464$), $FEF_{25-75%}(\ell/sec)=0.0176{\times}height(cm)-0.7876$(p<0.05, $R^2=0.0237$), $FEF_{200-1200m{\ell}}(\ell/sec)=0.0967{\times}height(cm)-11.037$(p<0.01, $R^2=0.1214$) this was approved statistically. According to this study, if height is taller than average, forced expiratory flow curve index were increased, there was a close relationship between height and forced expiratory flow curve, and there was a linear relationship as sector between height and forced expiratory flow curve index. Therefore, researches that study other factors such as sex, age, weight, body surface area, and obesity indexes other than height should be done to see if there are any further relationships.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.99-108
• /
• 2018

The purpose of this study is to determine the precise height in mountainous areas of South Korea and Jiri mountain area was selected as a test bed for the study. Gravity observation and GNSS surveying were performed for 44 BM(Benchmark) points in the test bed and calculate the height and the height correction. In the calculation, the dynamic correction amount, the orthometric correction amount and the normal correction amount were calculated, and the dynamic height and orthometric height and the normal height were calculated considering each correction amount. The results showed that the difference between normal gravity and observed gravity and also the difference between orthometric correction and the normal correction. In addition, the results of the comparison of the present official BM height and the computed orthometric height in this study show that Korean height system should be shifted from the normal orthometric height system to the orthometric height system. Because the difference between the orthometric correction and the normal correction within the test bed indicated a distribution of at a minimum of -234.41 mm up to 196.925 mm, and the difference between the present official BM height and the calculated orthometric height were distributed from -0.121m to 0.011 m.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.3
• /
• pp.443-448
• /
• 2013

PURPOSE: In recent years, senior friendly device is growing rapidly because of population aging The study was designed to investigate the effects of table height of electronic bed on upper extremity and trunk EMG in elderly. METHODS: Thirty right-handed elderly without history of neurological and musculoskeletal dysfunction were participated in this study. Three heights of the table (3/3 height, 2/3 height, and 1/3 height between top of the shoulder and olecranon) were provided. During the eating performance, surface electromyography (EMG) was used to measure muscle activity, and electrodes were attached to the deltoid middle fiber, serratus anterior, suprapinatus, upper trapezius, rhomboideus, cervical part of longissimus, thoracic part of longissimus, lumbar part of longissimus on right. One way ANOVA was conducted for the statistical analysis. RESULTS: There were significant differences in deltoid middle fiber, suprapinatus, upper trapezius, rhomboideus, lumbar part of longissimus in the 3 different height of table (p<.05). The deltoid middle fiber, suprapinatus, upper trapezius, and lumbar part of longissimus were significantly increased in higher table than lower table(p<.05). And the rhomboideus was significantly decreased in higher table than lower table(p<.05). CONCLUSION: This study demonstrates that different height of table affect upper extremity and trunk muscle activity. The table height of olecranon is the best for elderly.

• The Research Journal of the Costume Culture
• /
• v.23 no.4
• /
• pp.604-615
• /
• 2015

The objectives of this study were to investigate whether heel height changes in the U.S. market occur in a cyclical pattern and heel heights show greater within-year variability over time. Heel height data from U.S. Vogue's spring and fall editions were analyzed over the time period 1950~2014. A total of 1581 pieces of data were measured in millimeter units using Adobe Illustrator and standardized by dividing the height of the heel by the shoe length through the curved sole line. To analyze the cycle pattern of heel heights, the yearly averages were standardized by using three-year moving average technique to average out the irregular components of time series data and give a better indication of the long-term fluctuation of heel height. To identify the degree of within-year variability of heel height, the standard deviation of the average measurements for a year was calculated, and then decade averages were drawn from the yearly averaged standard deviation. One-way ANOVA was conducted to compare the within-year variability of data in heel height over the time period studied by decade. The results showed: First, there was a trend toward higher heels from the early 1950s to 2011. Second, four cyclical movements of heel height were observed from 1950 to 2007, and heel heights gradually decreased after 2008. Third, the within-year variability significantly increased over time, especially after the 1980s.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.1-14
• /
• 2003

This study was conducted to investigate the principles and motions for increasing the jumping height of Fosbury Flop. The subjects were three male jumpers who were former Korean national team players. Their jumping motions were analyzed using the DLT method of three-dimensional cinematography. The conclusions were as follows. 1. The horizontal velocity of approach run and decreasing of this velocity during the take off phase were increased as the jumping height was increased. Therefore, in order to increase the jumping height, the horizontal velocity of approachrun should be increased and decreased properly during the take-off phase. The average height of the analyzed Dials was 2.15m. The average horizontal velocity of approachrun was 7.49m/s and decreased to 4.16m/s at the instance of take-off. 2. The vertical velocity of the center of gravity was increased as the ascending height of the center of gravity during the take-off phase was increased. Therefore, the center of gravity at the instant of touch down should be lowered. This could be possible by increasing the length of the last stride and the backward lean angle of the body. The average length of the last stride was 111.1% of the standing height, the average height of the center of gravity was 46.6% of the standing height and the average backward lean angle of the body was 40.3 degrees.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.1
• /
• pp.11-16
• /
• 2008

This paper introduces a novel real-time soft shadowing method applicable for height maps. As well as supporting self-shadowing of the height map, our method allows shadows to be caught on other objects. The method is very suitable for dynamically changing height maps because it requires no precomputation. A shadow height map (SHM) is a new structure which represents the height of the shadow at each discretized coordinate of a height map. Constructing the SHM is O(n), where n is the number of texels in the SHM. Shadow can be computed from this map quickly and simply, using a pixel shader. Examples demonstrate good real-time performance and plausible visual quality.

• Journal of Preventive Medicine and Public Health
• /
• v.12 no.1
• /
• pp.24-30
• /
• 1979

This study was conducted to find out the most suitable weight-height index out of the $weight/height^{p}-type$ indices that could be used for the evaluation of nutritional status in an epidemiological survey and for the screening of the obesity. The subjects were chosen randomly, 2,182 males and 719 females from college students and office workers in Seoul districts. The 'best' power-type weight-height index for Korean men and women of all ages from 16 to 59 was found to be $weight/height^{1.54}$ for males and $weight/height^{1.42}$ for females. $Weight/height^2$ (Kaup index), however, was the best suited weight-height index for each age group of both sexes except that relative weight (weight/height) was considered to be desirable to apply for males of teen-aged and of over fifties and for females of over forties of age. Normal ranges of Kaup index values for males and females of each age group were presented in tables 5 and 6. These findings suggest that Koreans are generally leaner than other ethnic groups of the same sex and age.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.383-389
• /
• 2013

Demand for high-rising building has arisen. However, its maintenance is usually executed by labour. It could have a severe problem. We proposed a gondola robot to solve it. In this paper, we designed a height estimation sensor for this gondola. It is consist of pan-tilt unit, ARS sensor, and laser sensor. The pan-tilt unit keeps the laser sensor to indicate the gravity direction by referencing the ARS. The laser sensor's range is vertical distance from gondola to ground. However, if there is an obstacle under the gondola, the distance includes its height. To filter it out, we apply a Kalman filter for the height estimation. If the estimated height is changed extremely, the filter decides that there is an obstacle. Then, it remembers the height of obstacle. Other extreme changes of height estimations are reflected. The experimental results using the proposed sensor system show detail flow of the height estimation.

• Journal of the Korean Society of Costume
• /
• v.65 no.7
• /
• pp.86-100
• /
• 2015

This study is to investigate the relationships between heel height and macro-economic factors - recession and unemployment; and to analyze the time lags reflecting economic factors on heel height index using U.S. data. The life-history evolution theory was applied to propose the relationships studied. The data for the heel height measurements of women's shoes - pump style only - were obtained from US Vogue fashion editorial sections on spring and fall editions from 1950 to 2014. I divided the heel height by the length of the shoes in order to standardize the data. Total of 1581 samples were used, and heel height data were aggregated to create a yearly average. To explore the relationships between macro-economic factors and heel height, this study used OLS of Stata 13 program. The main findings show that unemployment rates influenced heel height for three years in a positive direction. Furthermore, the effects of unemployment rate from two years ago on the current heel height were very close to being on a significant level.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.37-43
• /
• 2019

This paper presents an optimization method to determine the shoulder height of an angular contact ball bearing by 3D contact analysis using nondimensional-shaped variables. The load analysis of the ball bearing is performed to calculate the internal load distributions and contact angles of each rolling element. From the results of bearing load analysis and the contact geometry between the ball and inner/outer raceway, 3D contact analyses using influence function are conducted. The nondimensional shoulder height and nondimensional load are defined to give the generalized results. The relationship between the shoulder height and radius of curvature of the shoulder under various loading conditions is investigated in order to propose a design method for the two design parameters. Using nondimensional parameters, the critical shoulder heights are optimized with loads, contact angles, and conformity ratios. We also develop contour maps of the critical shoulder height as functions of internal loads and contact angles for the different contact angles using nondimensional parameters. The results show that the dimensionless shoulder height increased as the contact angle and dimensionless load increased. Conversely, when the conformity ratio increased, the critical shoulder height decreased. Therefore, if the contact angle is reduced and the conformity ratio is increased within the allowable range, it will be an efficient design to reduce the shoulder height of ball bearings.