• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.117-123
• /
• 2016

글라스울(Glass Wool)은 건설 현장 및 여러 다양한 분야에서 단열재로 사용되고 있다. 글라스울의 경우 불연재료이며 화재시 유해한 가스를 발생시키지 않으므로, 단열재로서의 사용이 더욱 권고되고 있는 상황이다. 그러나 글라스울이 반복적인 습윤 건조의 싸이클에 노출되면, 공극의 감소및 수축이 발생하여 단열성능을 잃게 되므로, 주기적인 교체가 필요하다. 본 연구에서는 이러한 폐글라스울을 콘크리트용 첨가재료로 활용하여 역학적 성능을 개선하고자 하는 시도를 하였다. 실험 결과에 따르면 폐글라스울은 약한 포졸란 반응성을 가지며, 압축강도 및 휨강도의 증가 효과를 가짐을 알 수 있었으며, 이를 위한 최적의 폐글라스울 혼입량은 콘크리트 체적의 0.5%에 해당되는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.886-889
• /
• 2001

Silicone rubber is being used for the housing material of outdoor high voltage insulators such as composite insulator, bushing, surge arrestor and cable terminator because of good tracking and erosion resistance, good hydrophobicity and recovery of hydrophobicity and chemical stability. But, the leakge current occurs on surface of the composite polymeric insulation materials when the insulator is used for a long time with severe contaminative condition and it can lead the contamination flashover. So the leakage current is important to estimate the condition of the silicone rubber surface. In this paper, aging characteristics of silicone rubber used for outdoor insulation have been hydrophobicity of silicone rubber in salt fog chamber with average leakage current monitoring for observing the transformation of surface degradation properties of silicone rubber with different ATH(alumina trihydrate, A1$_2$O$_3$$.$3H$_2$O) filler contents. The experimental results show that a higher peak leakage current and to raise a long time for tracking with increasing amount of ATH by the salt fog and heat recycle ageing.

• Carbon letters
• /
• 제16권3호
• /
• pp.203-210
• /
• 2015

This study fabricated low thermal conductive polyacrylonitrile (PAN)-based carbon fibers containing cellulose particles while maintaining their mechanical properties. The high thermal conductivity of carbon fibers limits their application as a high temperature insulator in various systems such as an insulator for propulsion parts in aerospace or missile systems. By controlling process parameters such as the heat treatment temperature of the cellulose particles and the amount of cellulose added, the thermal and mechanical properties of the PAN-based carbon fibers were investigated. The results show that it is possible to manufacture composite carbon fibers with low thermal conductivity. That is, thermal conductivities were reduced by the cellulose particles in the PAN based carbon fibers while at the same time, the tensile strength loss was minimized, and the tensile modulus increased.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권1호
• /
• pp.1-7
• /
• 2004

This paper describes the carbonization characteristics of a phenolic resin deteriorated by tracking under the environment of a fire. In the experiment, a liquids droplet of 1[％] NaCl was dripped on the phenolic resin to cause a tracking with 110[V], 220[V] voltages applied. It can be addressed from the experimental results that when an insulator is carbonized by an external fire, its structure is amorphous. If an insulator is carbonized by electrical cause, on the other hand, its structure would be crystalline. In order to observe the surface change of the phenolic resin, the tracking process was analyzed by using SEM. In the case that the materials are carbonized under heat or fire, the exothermic peak appears around 500[$^{\circ}C$]. This is one of the important factors to determine the cause of fires. As a result of DTA, the exothermic peaks of an untreated sample showed at 333.4[$^{\circ}C$], 495.7[$^{\circ}C$] but those of a sample deteriorated by tracking appeared at 430.6[$^{\circ}C$], 457.6[$^{\circ}C$] in a voltage of 110[V], and at 456.2[$^{\circ}C$], 619.7[$^{\circ}C$] in a voltage of 220[V]. It is possible, therefore, to distinguish a virgin sample from carbonized samples(graphite) by the exothermic peak.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.51-56
• /
• 2004

광소자의 재료물질로서 특성이 우수하며 열광학계수가 큰 silicon을 기반으로 한 SOI (Silicon-on-insulator)를 사용하여 열광학 1×2 광스위치를 제안, 제작하였다. SOI wafer는 도파로가 형성될 상위 Si 층(n=3.5)과 클래딩 영역이 될 산화막 매립층(n=1.5) 그리고 기판인 Si인 3층으로 이루어진다. BPM(Beam propagation method) 전산모의를 통해 20dB 이상의 누화특성을 갖는 단일모드의 1×2 비대칭 y-분기 광도파로를 형성하고, 열확산 전산모의를 통해 금속열선을 설계 제작하였다. 제작된 광스위치는 약 3.5 watts의 구동 전력에서 20dB 이상의 채널간 누화가 측정되었다.

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.94-97
• /
• 2017

A method of improving the anti-fouling characteristics of porcelain insulators was proposed in this study. Functional coating was performed as a method of reducing the surface contamination of the porcelain insulators. The functional coating was applied on a ceramic substrate, which has the same material as the porcelain insulators. After coating the ceramic substrate 2, 3, 4, and 5 times alternately in the horizontal and vertical directions, the surface characteristics according to the thickness of the coating film were analyzed. The optimal process was selected to coat the surfaces of the post insulators and long rod insulators, which are the representative porcelain insulators. After coating, heat treatment was performed for 1 hour at $200^{\circ}C$ in a furnace to secure the durability of the coating film. Compared to the uncoated insulators, the insulators with the functional coating showed significantly improved anti-fouling characteristics as well as excellent adhesion to the coated insulator surface.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.120-129
• /
• 1997

The fire protective coating can reduce certain damages in case of fire, also conserve energy by thermal insulation and prevent corrosion and errosion in normal daily life by means of blocking thermal transfer, that were generally made of organic, inorganic and metallic materials as adiabatic coating. In case of inorganic material such as soluble silicate, it produces less toxic substances which are exposed to Ore, and have a plenty of raw material. Also inorganic thermal insulator is good in heat resistance. To develope such a excellent inorganic thermal insulator, the study of fire protective coating using the alkali silicate is necessary The principle of intumescence for alkali silicate is from rapid evolution of water in the coating material, the quantity of water in it is of course influenced on the degree of intumescence. The phenomenon of intumescence in ternary silicate is increased as the radius of ion is bigger, and this is caused by evolution of so many kinds of water. The individual degree of intumescence is ordered like this ; $K^+$ > $Na^+$ > $Li^+$ . The best protection effect is similarity found to intumescence of ternary silicate. The result of X-ray diffraction analysis indicates that $KHSi_2O_5$ is an important ingredient in K-silicate.

• International Journal of Reliability and Applications
• /
• 제17권2호
• /
• pp.137-147
• /
• 2016

The engine mount of a car subjected to a pre-load related to the weight of the engine, and acts to insulate the vibration coming from the engine by moving on large or small displacement depending on the driving condition of the car. The vibration insulation of the engine mount is an effect obtained by dissipating the mechanical energy into heat by the viscosity characteristic of the rubber and the microscopic behavior of the additive carbon black. Therefore, dynamic stiffness from the intrinsic properties of rubber filled with carbon black at the design stage is an important design consideration. In this paper, we introduced a hyper-elastic, visco-elastic and elasto-plastic model to predict the dynamic characteristics of rubber, and developed a fitting program to determine the material model parameters using MATLAB. The dynamic characteristics analysis of the rubber insulator of the ACTIVE MOUNT was carried out by using MSC.MARC nonlinear structural analysis software, which provides the dynamic characteristics material model. The analysis results were compared with the dynamic characteristics test results of the rubber insulator, which is one of the active mount components, and the analysis results were confirmed to be valid.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.8-14
• /
• 2019

Many electrical socket-outlet fire accidents take place not only in homes but in the offices each year. The causes are mostly faulty constructions, managerial problems and carelessness. Construction and managerial flaws can be resolved by regular or special inspections, but carelessness is not solvable through inspections. Such carelessness can be related to the consumption capacity of electrical socket-outlets presently, the rated current of electrical socket-outlets is based on 16A. However, even at 16A, the heat generated in the insulator of an electrical socket-outlet varies due to such factors as part damage and environmental conditions of use. To explore this situation, the study conducted an experiment to analyze thermal relationship by applying 10A, 20A, and 30A currents. To secure reliability, the study employed thermal analysis simulation and compared the thermal relationship in the same current value. The experimental and simulation values were found to be similar and therefore, diverse current values were replaced with the simulation. At 30A, the temperature was found to rise to at least $169.9^{\circ}C$ which had worked as a sufficient amount of energy to bring the insulation aging of insulator.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.733-737
• /
• 2007

본 논문은 MCPCB에 다수의 와트급 LED를 모듈화하여 조명기구로 사용함에 따라 발생하는 열을 해결하기 위한 제안이다. LED가 조명기구로 사용되려면 칩의 용량이 커야하며 이 결과 P-N접합부의 열이 증가하게 됨으로 이를 해결하기 위해 펠티어 소자와 방열판 그리고 Fan을 설치하여 온도변화특성을 측정하였다. 또한 부가적으로 냉각소자와 방열판을 접속하는 열전도판, 단열재, Thermal Grease에 따른 온도변화특성을 실험하였다. 그 결과 방열판의 종류 및 체적에 따른 온도 변화가 가장 중요한 요소로 나타났다. Fan의 on, off에 따른 온도변화는 최대 $18[^{\circ}C]$의 변화폭을 주었으며 부가적 재료들도 $2{\sim}3[^{\circ}C]$의 온도변화에 영향을 주어 무시할 수 없는 요소임을 확인하였다.