• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.445-447
• /
• 2000

The terminal and core(wire conductor) in a Harness processing is connected by putting them in a applicator by virtue of a manual operation. A normal or abnormal condition of crimping connections is nearly determined by a skilled worker. In general, a skilled worker operates a press motor with a foot switch by pressing on foot and puts a wire conductor into a press with one hand. By doing so, sufficient efficiency is not obtained by a worker. In this paper, a basic study has done to make improve an efficiency by finding the normal arrangement out as to whether a terminal and wire conductor in Harness are placed on the right position or not with a quadrant plane photo position sensor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.172-175
• /
• 2000

The crimping connection is a permanent connection that maintains mechanical and electrical property for a long time by crimping two conductors. In this paper, we have done a basic study to decide normal or abnormal condition depending on crimping. Using PZT piezo-sensor, we have analyzed crimping waveforms according to the crimping height. And hence the normal or abnormal condition of crimping connections in real time could be decided by comparison of crimping waveforms in the cases of normal crimping, over crimping, under crimping and core omitting.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.7
• /
• pp.551-556
• /
• 2018

A lot of hardwares are allocated on the satellite to perform the attitude control. Sun sensor is very important hardware to acquire the initial attitude after separation from launcher and to maintain the safety attitude from the satellite anomaly operation. So the allocation of the sun sensor to acquire the field of view and the attitude control design using it, are critical work in the beginning of development. Number of Sun sensor for GEO-KOMPSAT2 is reduced with respect to COMS due to star tracker usage. The additional sun sensor using COMS heritage is considered. In this paper, it is described the analysis and the results on the method for the safety improvement which is to enlarge the field of view and to consider the harness connection of P/R-side of the sun sensor.

• Journal of Aerospace System Engineering
• /
• v.15 no.2
• /
• pp.45-51
• /
• 2021

In this study, we aim to eliminate the flickering phenomenon in multi-function display (MFD) units during the flight of fixed-wing aircraft. To execute flight missions effectively, the video signals transmitted to MFDs must provide information accurately and seamlessly. Therefore, a method for addressing the flickering phenomenon-including cause analysis and failure diagnosis-is adopted; specifically, a wiring configuration with a direct connection between the video signal cables and with a short cable length is adopted. The proposed method is experimentally verified using a flight test.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.389-400
• /
• 2008

As the wireless network technologies and the capability of the mobile terminals are evolving, advanced peer to peer applications for mobile users are attracting interests. In this paper, we propose the mobile P2P communication platform(MPCP) which provides transparency to the wireless network technologies and solutions to the limited resources of the mobile terminals. MPCP classifies the connection into two levels: a virtual channel and a session. A virtual channel is the network layer connection between the terminals whereas a session is the application layer connection. MPCP classifies the sessions into four types and applies different scheduling priority and data processing policies such as segmentation and reassembly. It selects proper wireless network technologies depending on the distance between the communication endpoints. To acquire dynamically changed access address, we harness the Session Initiation Protocol. We implemented MPCP on embedded Linux simulator and utilized the implementation in mobile P2P service development. For the quantitative analysis, we compared the performance of MPCP with that of ftp. Regardless of the number of simultaneous sessions, MPCP maintains the relative performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.205-212
• /
• 2011

The high performance intelligent robots have become to use a lot of sensors, actuators and controllers which are connected via bus-type networks while the point to point connection was widely used in-robot networks of existing robots. The bus topology makes the robot system share data internally and it can also reduce the weight of the robot because of smaller wiring harness. The CAN is one of serial bus communication protocols typically used for in-vehicle networks and now it can also be used for in-robot networks because of its low cost and reliability. A performance evaluation system for this type of networked system is developed to analyze the real-time operation and the reliability of a serial-bus network, and the usefulness of the developed evaluation system is shown by some experiments for a network of many CAN nodes.

• Journal of Fashion Business
• /
• v.20 no.1
• /
• pp.142-156
• /
• 2016

Convergence of IT devices and fashion is enabling the industry to take fully different approaches in various areas including product planning, fabric selecting, distributing, and marketing. At the same time, it also transforms the definition of clothing itself. Convergence of IT technologies in the realm of fashion and textiles industries can create a powerful synergy through connection digital devices, such as mobile phone. In this context, this study attempts to suggest how IT technology can be efficiently harnessed through the usage of mobile devices in the planning stage of fashion materials, where the initial production plan of a clothing item is mapped out. This study ultimately aims to enhance the effectiveness of databases on fashion material information by using mobile devices to utilize NFC, an RFID technology having as much revolutionary power as Internet - which can be the convergence between IT and fashion across the software dimensions. To pursue this research, data on fashion material information regarding 200 woven fabric specimens were provided by textile companies. The information includes elements such as its composition, weight, width, yarn, density and sales report. These pieces of information were organized into a database. Drawing on this data, Android-based applications that allow smart phones to read off fabric information from NFC tags were developed for this study using two methods. The system works as follows: 1. NFC tag stickers are attached onto the hangers where 200 fabric samples are hanging. 2. The NFC tag stickers are tagged, or read off from a smart phone that support NFC functions. 3. Upon tagging, the Smart phone swiftly displays all information available on its screen - not only the aforementioned six elements, but also the image of the clothing item from the fabric in its finalized product form, and the video of the model wearing the item - for convenient view. The method harbors immense potential for the fashion industry in general, and will also be useful in those fields inside the industry that harness NFC technology.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.205-210
• /
• 2014

This is concerned with the technology to display the design on Porcelain and adjust malfunction for moving effect and light intensity by curator. More precisely, the technology makes it possible that the porcelain is connected to Light module which is the device for controlling light emission and rotating rolling plate, etc that are connected to LED light module, optical fiber and controller that is for scenario from the given storytelling. In addition, with a WiFi portable device (Smart-phone, other mobile device). equipped with a scenario programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and menu color and alarm is alerted when the displaying design is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiFi network to the device and PC managed by the curator specialized in managing the design on the Porcelain, thus the technology could help the curator who have less knowledge about moving pattern on the Porcelain. There is always a possibility of malfunction due to various condition that are caused by wring-harness when modules are wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from LED control module, Light emission sensor and a personal WiFi device. Also, we performed connection between optical Fiber and LED and interlock for the system defined by the definition for information and storytelling scenario.