• 제목/요약/키워드: Hardy-Cross method

검색결과 12건 처리시간 0.023초

배관망 해석 방법을 이용한 스프링클러 시스템의 수리계산 프로그램 개발 (A Development of Program on the Hydraulic Calculation in Sprinkler System Based on the Piping Network Analysis Method)

  • 송철강;이명호;강계명
    • 한국화재소방학회논문지
    • /
    • 제16권1호
    • /
    • pp.24-29
    • /
    • 2002
  • 본 연구는 배관에서의 정확한 압력손실과 유량을 측정하기 위하여 스프링클러 시스템중 격자배관방식에 대한 수리계산 프로그램을 개발하는데 그 목적이 있다. 본 프로그램 개발은 배관망 해석방법 등 여러 가지 자료로 근거하며, 격자배관방식이 국내에서 현행 시행되고 있는 규약배관방식의 단점을 보안하여 스프링클러 시스템을 성능기준화재안전설계로 이끌어 내기 위함이다. 소화설비의 전산화로 인한 작업의 편리성과 정확한 계산을 측정함으로서 전진적인 화재안전설계를 이룩하게 될 것이다. 이러한 프로그램의 개발은 미국 등에서 먼저 이루어져 오고 있으며 국내에서의 소방에 대한 발전이 한 단계 발전되는 계기를 마련하게 될 것이다.

네트워크형 터널의 환기해석 방법에 대한 기초연구-비 Hardy-Cross 방법을 중심으로 (A fundamental study on the ventilation analysis method for the network-type tunnel - focused on the none hardy-cross method)

  • 김효규;최판규;류지오;이창우
    • 한국터널지하공간학회 논문집
    • /
    • 제18권3호
    • /
    • pp.291-303
    • /
    • 2016
  • 최근 도시부 지하도로 건설에 따른 터널내 다양한 형태의 분기부가 설계되고 있으며, 이는 기존의 일자형 터널에서의 환기해석 방법과는 다른 해석방법을 요구하고 있다. 그러나 국내외 터널환기 해석방법중 네트워크형 터널에 대한 환기해석에 대한 방법은 설계기준으로 제시되지 않고 있으며, 주로 네트워크용 수치해석 프로그램에 의존하여 설계가 진행되고 있다. 본 연구에서는 수치해석적 방법이 아닌 특성화 방정식에 기초한 네트워크형 터널에 대한 환기해석 방법 중 설계기준으로 적합한 네트워크 모형을 고찰하였다. 기존의 Hardy-Cross 방법은 계산방법이 비교적 간단하고 수계산이 가능한 장점이 있어, 광산통기 및 터널환기 분야에서 폭넓게 적용되어 왔다. 그러나 Tayler 정리에 따른 절단오차 문제 및 대규모 네트워크 환경에서 mesh의 선택 알고리즘에 따른 수렴성 문제가 보고되고 있다. 따라서 본 연구에서는 비 hardy-cross 방법 중 mesh의 구성이 없이도 유량과 압력을 동시에 해석할 수 있는 gradient method로 네트워크형 터널에 대한 환기해석의 적용성을 고찰하였고, 더불어 네트워크형 터널에 대한 환기해석이 가능한 간편한 방법을 제시하는데 그 목적이 있다.

Hardy-Cross법을 이용한 $CO_2$ 냉동기용 내부열교환기의 열전달 특성 연구 (Analysis of Heat Transfer Characteristics of Internal Heat Exchanger for $CO_2$ Refrigerator using the Hardy-Cross Method)

  • 강희동;김욱중;서태범
    • 설비공학논문집
    • /
    • 제17권1호
    • /
    • pp.1-7
    • /
    • 2005
  • The heat transfer characteristics of an internal heat exchanger for $CO_2$ refrigeration cycle are numerically investigated. The numerical model is verified using the published experimental results for the concentric tube type internal heat exchanger. The Hardy-Cross Method gives very good agreement between the calculation and experimental results on the heat transfer rates and exit temperatures. Also, appropriate combination of heat transfer correlations is found. The operating parameters of the heat exchanger are calculated at transcritical region of $CO_2.$ The heat transfer rate of the counter flow type heat exchanger shows the $32\%$ greater than that of the parallel flow type heat exchanger. The increase of heat exchanger length enhances the heat transfer rate. The thermodynamic characteristics and heat transfer coefficient of $CO_2$ in the internal heat exchanger are estimated.

ANALYSIS OF LOOPED WATER DISTRIBUTION NETWORK

  • Ioan Sarbu
    • Water Engineering Research
    • /
    • 제2권3호
    • /
    • pp.171-178
    • /
    • 2001
  • There are three methods for analyzing flow and pressure distribution in looped water distribution networks (the loop method, the node method, the element method) taking into consideration hydraulic parameters chosen as unknown. For all these methods the non-linear system of equations can be solved by iterative procedures. The paper presents a different approach to this problem by using the method of variational formulations for hydraulic analysis of water distribution networks. This method has the advantage that it uses a specialized optimization algorithm which minimizes directly an objective multivariable function without constraints, implemented in a computer program. The paper compares developed method to the classic Hardy-Cross method. This shows the good performance of the new method.

  • PDF

A Comment for Teaching Correlation Coefficient in Elementary Statistics Course

  • Oh, Myong-Sik
    • Communications for Statistical Applications and Methods
    • /
    • 제14권2호
    • /
    • pp.301-307
    • /
    • 2007
  • A effective teaching method on correlation coefficient for elementary level statistics course is discussed in this article. The well known inequalities, such as Theorem 368 of Hardy et al. (1952), are used for the interpretation of concept of covariance. An Excel example is provided for the illustration of concept of correlation coefficient.

Sidesway가 생기는 강구조의 Moment분배법 완전해법

  • 김택진
    • 건축사
    • /
    • 11호통권82호
    • /
    • pp.26-35
    • /
    • 1975
  • The present Structuralists have usually calculated the end Moment of Rigid-frame members by using the Moment Distribution Method, presented by Hardy Cross in 1930, on the Basis of Elastic Law. But this method is considered to be an unfinished solution in case of the moment condition, which the Non-Equilibrium distributed loads or the Horizontal Force acted upon it result in deflection. Hence, after finishing the calculation of stress by means of the Moment Distribution Method, the stress condition due to Horizontal Forces had to be corrected approximatly. However we can directly get the solution of Rigid-frame having sidesway not by above method but by the Moment Distribution computation. Consequently this method is regarded as a Perfect Moment Distribution Method. Here 1 present.

  • PDF

네트워크형 터널의 풍량 및 농도해석 프로그램 개발연구 (Development of a program to predict the airflow rate and pollutant concentration in complex network-type tunnels)

  • 김효규;최판규;류지오;이창우
    • 한국터널지하공간학회 논문집
    • /
    • 제19권2호
    • /
    • pp.213-229
    • /
    • 2017
  • 최근 도심지 터널은 진출입 Ramp를 포함한 다양한 형태의 네트워크형 터널이 건설되고 있다. 더불어 터널환기 해석을 위한 다양한 네트워크 이론 기반의 1D 프로그램들이 개발되고 있다. 본 연구에서는 비 hardy-cross 법에 기초한 네트워크형 터널에 대한 풍량 및 농도해석이 가능한 프로그램을 개발하였다. 터널 구간내 풍량해석은 Gradient 법에 기초하고 있으며, 농도해석을 위하여 복잡한 네트워크 구조에서 유입과 유출농도를 자동계산 할 수 있는 로직을 개발하였고, 저속풍량구간에서는 수치해석적 오차를 축소시키기 위한 적정 그리드 간격을 제시하였다. 또한, 프로그램의 적정성을 검증하기 위해, 일자형 터널을 대상으로 고전적인 Sokic의 풍속 선도법 및 TVSDM 프로그램과의 풍속비교검증을 수행하였으며 오차율은 1% 이하였다. 또한 최근 건설되는 도심지 터널에 적용중인 최신 환기방식에 대한 네트워크 환기해석을 수행하였다.

아파트의 온수공급배관망해석 (Analysis on Heat Supply Piping Network for Apartment House)

  • 박윤철;황광일
    • 한국주거학회논문집
    • /
    • 제13권6호
    • /
    • pp.89-99
    • /
    • 2002
  • The purpose of this research is to analyze the characteristics of flow rate distribution in hot-water piping networks in the apartment building. A 14-story apartment house was selected as a sample building and analyzed numerically by Hardy-Cross method. Two different piping networks, one has three vertical zones and the other of a single zone with automatic balancing valves, were compared. Some of research results are as follows; As the temperature of supply hot-water increases, the flow rate of it does by buoyancy effect, but this effect is not found in the piping network with automatic balancing valves. Non-uniformity in hot-water flow distributions to all stories in the piping system of single vertical zone can be completely reformed by the installation of either manually operated or automatic balancing valves in every story.

제주외항 건설에 따른 주변 해역의 해빈류 변화 예측 (A Simulation of Wave Induced Current Around the Jeju New Harbor)

  • 곽문수;편종근
    • 한국방재학회 논문집
    • /
    • 제4권3호
    • /
    • pp.1-8
    • /
    • 2004
  • 본 연구에서는 하디크로스법을 적용한 해빈류 해석 수치모델을 사용하여 제주외항의 건설진, 후에 대한 주변 해연의 흐름 변화를 예측하였다. 수치계산은 외항 건설전의 현재상태와 구조물 완공후의 상태에 대하여 실시하였고, 파향은 계절적인 변화를 고려하여 겨울철 NNW 방향과 여름철 NE 방향을 각각 검토하였다. 계산결과는 건설전, 후 모두 겨울철 NNW 방향의 고파랑 내습시 해빈류가 크게 발생하였다. 또한, 건설전에는 외항 건설 예정해역에서 서쪽에서 동쪽으로 향하는 연안류가 발생하여 화북동 전면해역에서 이안류를 형성하였지만, 건설후에는 화북동 전면해역에서 이안류가 순환류의 형태로 변화하였으며, 외항 입구에서 작은 순환류가 나타남을 볼 수 있었다. 한편, 외항에서 북동쪽으로 3.0km 떨어진 삼양해수욕장 주변의 흐름분포는 외항과 반대방향인 서쪽에서 동쪽으로 연안류가 발생하고 있음을 알 수 있었으며, 해수욕장의 표사이동에 의해서 외항에 미치는 영향은 매우 작을 것으로 판단된다.