• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1193-1199
• /
• 1990

본 연구에서는 가공경화지수 (n)가 서로 다른 몇가지 재료를 선택하고 과대하 중의 비 (%PL)를 달리하는 단일 과대하중 피로 시험을 행하여 재료의 가공경화지수가 피로 균열 진파의 지연거동에 미치는 영향과 아울러 균열닫힘현상과의 관계를 구명하였다.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.17-32
• /
• 1994

역재하시에 나타나는 흙의 비등방거동을 모델하기 위하여, 본 연구에서는 일반 등방경화규칙에 근거한 비등방 경화이론을 개발하였다. 일반 등방규칙은 등방경화의 기준이 되는 중심응력텐서가 임의의 응력상태에서 존재할 수 있도록 허용하므로, 역재하과정에서 발생하는 소성변형을 예측할 수가 있다. 제안된 구성모델은 단순한 경화함수만을 이용하여 수식화되었고, 일반등방경 화규칙에 적용된 개념을 기존의 비등방경화규칙과 비교하여 서술하였다. 검증을 위하여, 배수 및 비배수조건, 과압밀상태, Ko 압밀등의 초기조건이 상이한 점토에 대하여 관측된 삼축압축시료의 거동을 예측하였다.

• 한국주조공학회지
• /
• 제19권5호
• /
• pp.419-426
• /
• 1999

Hardening behavior and metal-mold reaction of phosphate bonded investments for titanium and titanium alloys were investigated. Alumina and $Y_2O_3-stabilized$ zirconia, which are thermodynamically more stable than Titania, were used as major filler materials. $NH_4H_2PO_4$ was used as binder, and MgO was used as hardening acceleration material. A different composition ratio of binder and hardening acceleration material had effected on general hardening behavior and castings. And adding $YO_3-stabilized$ zirconia to alumina, metal-mold reaction characteristics for castings was evaluated. Considering working conditions and effects on castings, the best composition ratio conditions were both 10:10 and 12:8($NH_4H_2PO_4vs.\;MgO$). On the other hand, increasing the contents of $Y_2O_3-stabilized$ zirconia for filler material, metal-mold reaction layer of titanium castings was greatly decreased.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.264-266
• /
• 2000

In this study, analysis of creep-fatigue behavior of low alloy steel weld was performed. An interface was employed along the crack plane to simulate the interface between base metal and weld metal. A trapezoidal waveshapes was loaded cyclically and analysis result was compared with that of monotonic load. The material was assumed as elastic-plastic-secondary creeping material. Because the isotropic hardening plasticity model used in the last study cannot simulate the behavior of material under cyclic load, the linear kinematic hardening plasticity model was used. The behavior of strain field and $C_{t}$ parameter was obtained.d.

• 소성∙가공
• /
• 제14권4호
• /
• pp.327-337
• /
• 2005

In the present work, the two back stress kinematic hardening models are proposed by combining Armstrong-Frederick, Phillips and Ziegler's hardening rules. Simple combination of hardening rules using simple rule of mixtures results in various evolutions of the kinematic hardening parameter. Using the combined hardening models the ultimate back stress fur the present models is also derived. The stress rate is co-rotated with respect to the spin of substructure due to the assumption of kinematic hardening rule in finite deformation regime. The work piece under consideration is assumed to consist of the elastic and the rigid plastic deformation zone. Then, the J2 deformation theory is facilitated to characterize the plastic deformation behavior under various loading conditions. The plastic deformation localization behaviors strongly depend on the constitutive description namely back stress evolution and its hardening parameters. Then, the analysis for Swift's effects under the fixed boundaries in axial directions is carried out using simple shear deformation.

• 한국지반공학회지:지반
• /
• 제10권1호
• /
• pp.103-118
• /
• 1994

세주응력을 서로 독립적으로 조절할 수 있는 입방체형삼축시험기를 이용하여 모래시료에 대한 일련의 배수삼축시험이 실시되었다. 그리고 Lade에 의해 제안된 등방단일경화구성모델을 사용하여 입방체형삼축시험시와 동일한 응력경로에 대한 응력-변형률 거동을 해석하였다. 등방단일경화구성모델에 의한 거동 예측치는 초기재하단계(primary loading)시 입방체형삼축시험결과와 좋은 일치를 보이고 있는 것으로 나타났다. 그러나 반복재하단계(unloading과 reloading)의 경우 거동예측치는 시험결과와 많은 차이를 보이고 있다. 이것은 등방단일경화구성모델의 소성일경화계수가 시험결과의 경화부분을 근거로 하여 결정되었기 때문에 연화부분에서 많은 오차가 있는 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.917-925
• /
• 2022

Steam generator (SG) tubes in a nuclear power plant can undergo rapid changes in pressure and temperature during an accident; thus, an accurate model to predict short-term creep damage is essential. The theta (𝜃) projection method has been widely used for modeling creep-strain behavior under constant stress. However, many creep test data are obtained under constant load, so creep rupture behavior under a constant load cannot be accurately simulated due to the different stress conditions. This paper proposes a novel methodology to obtain the creep curve under constant stress using a modified 𝜃 projection method that considers the increase in true stress during creep deformation in a constant-load creep test. The methodology is validated using finite element analysis, and the limitations of the methodology are also discussed. The paper also proposes a creep-strain model for alloy 690 as an SG material and a novel creep hardening rule we call the damage-fraction hardening rule. The creep hardening rule is applied to evaluate the creep rupture behavior of SG tubes. The results of this study show its great potential to evaluate the rupture behavior of an SG tube governed by creep deformation.

• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1239-1249
• /
• 2013

본 연구에서는 zircaloy-4 판재에 대해 바우싱거 효과를 고려한 경화거동 예측모델을 구축했다. 금속소재 가공에서 인장 후 압축 시 항복응력이 감소한다. 이에 스프링백 해석 시 바우싱거 효과를 반드시 고려해야 한다. Simple shear 시험에서 적정 시편크기 및 적정 조임토크에 대한 결정법을 제시했다. 5 가지 재료에 대한 simple shear 시험을 통해 응력-변형률 곡선을 구했다. 또한 유한요소해석을 활용해 simple shear 하중-변위 곡선으로부터 유효응력-변형률 곡선으로 변환과정을 소개했다. 등방/운동성 경화 조합모델을 활용해 simple shear 순/역방향 시험을 모사했다. 이때 각 경화계수에 따른 하중-변위 곡선 변화를 관찰하고, zircaloy-4에 대한 경화계수를 결정했다.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.273-279
• /
• 2017

In sheet metal forming numerical analysis, the strain hardening equation has a significant effect on calculation results, especially in the field of spring-back. This study introduces the Kim-Tuan strain hardening model. This model represents sheet material behavior over the entire strain hardening range. The proposed model is compared to other well known strain hardening models using a series of uniaxial tensile tests. These tests are performed to determine the stress-strain relationship for Al6016-T4, DP980, and CP Ti sheets. In addition, the Kim-Tuan model is used to integrate the CP Ti sheet strain hardening equation in ABAQUS analysis to predict spring-back amount in a bending test. These tests highlight the improved accuracy of the proposed equation in the numerical field. Bending tests to evaluate prediction accuracy are also performed and compared with numerical analysis results.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.75-78
• /
• 2003

In order to describe the Bauschinger and transient behavior of orthotropic fiber-reinforced composites, a combined isotropic-kinematic hardening law based on the non-linear kinematic hardening rule was considered here, in particular, based on the Chaboche type law. In this modified constitutive law, the anisotropic evolution of the back-stress was properly accounted for. Also, to represent the orthotropy of composite materials, Hill's 1948 quadratic yield function and the orthotropic elasticity constitutive equations were utilized. Furthermore, the numerical formulation to update the stresses was also developed based on the incremental deformation theory for the boundary value problems. Numerical examples confirmed that the new law based on the anisotropic evolution of the back-stress complies well with the constitutive behavior of highly anisotropic materials such as fiber-reinforced composites.