• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.112-119
• /
• 2001

In general, the definition of criticism is making a constructive analysis between good & evil, right & wrong, and beauty & ugliness. Just as the literature, art, music, and architecture welcomes productive criticism in order for further advancement in each professional field, constructive criticism in the field of interior architecture must be activated stance it would be as useful as in other fields to upgrade the level of design quality If the constructive criticism were to be taken properly in the benefit of further advancement in particular design, then the criticism must hale a proper criteria in order to examine and review the design work objectively However, as the design symbolizes cultural interpretation and reaction towards better creativity, we expect design to be mutated in many different directions. As the limit of Interior architecture shares limitless possibilities in today's society, it seems that we need to set up a guidelines of design criticism in order to support the further development of the area of interior architecture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.5-8
• /
• 1994

In this paper, Dielectric and strain properties of (1-x-y)PMN-yPT-xST Ceramics hale been investigated as a function of the amount of SrTiO$_3$(ST). The SrTiO$_3$ content is ranged from 0.01-0.05(wt%). As the amount of ST is increased, dielectric constant has a maximun value at 0.05 mol% composition. The Curie temperature is decreased linearly with increasing ST composition and Polarization properties have been investigated. Coercive field and remnant polarization has a maximum value at 0.01mo1% composiion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.393-396
• /
• 1997

Electro Discharge Machining (EDM) is a so-call non-conventional machining technique. This paper presents the experimental results of an EDM technique for the fabircation of microholes on #7440 pyrex glans. With various applied voltages and at various concentration of KOH solution, the glass substrate have been microdrilled using the copper electrodes of which diameters are 250$\mu\textrm{m}$ to 450$\mu\textrm{m}$, respectively. The machined throughholes have been observed the top diameter, the bottom diameter, hollow width and hole diameter of the hole, and machining time hale been measured. The experimental results show that the machining time decreases as the concentration of KOH solution increases or the applied voltage increase. Also, The top diameter increases as the concentration of KOH solution decreases or the allied voltage increases. The bottom and hollow width decreases as the of KOH solution increases or the applied voltage decreases.

• The Journal of Korean Medical History
• /
• v.20 no.2
• /
• pp.3-17
• /
• 2007

The term '健康(heathy condition)' does not appear in East Asian medical classics. Its root comes from the ancient word 'hal' which can be translated as 'hale', 'whole', 'sound in wind and limb', and it means 'the physical state is flawless, whole, satisfactory, and strong'. The Japanese translated it into the Chinese letters 건강 in the 19th century and this was spread during the Japanese occupation era. This study is an attempt to explore what "huangdineijing" (the most representative medical documents of East Asian medicine) mentions about healthy condition, which is as a term to express the body's ideal state and what other concepts exist that correspond to 健康.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.87-95
• /
• 1998

This study proposes the analysis and evaluation method of time series ultrasonic signal using the attractor analysis. Features extracted from time series signal analyze quantitatively characteristics of welding defects. For this purpose, analysis objective in this study is fractal dimension and attractor Quadrant feature. Trajectory changes in the attractor indicated that even the same type of defects carried substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange. Such differences in characteristics of weld defects enables the evaluation of unique features of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hale) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimensions. Proposed attractor feature extraction in this study can enhance the precision rate of ultrasonic evalaution for defect signals of rail weld zone such as side hole and crack.

• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.187-194
• /
• 2023

The remote sensing technique of measuring the magnetic field was applied first to sunspots by Hale (1908). Later Babcock (1961) showed that the solar surface magnetic field on a global scale is a dipole in first-order approximation and that this dipole field reverses once every solar cycle. The Wilcox Solar Observatory (WSO) supplies the spherical harmonics coefficients of the solar corona magnetic field of each Carrington Rotation, calculated based on the remotely-sensed photospheric magnetic field of the solar surface. To infer the internal current system producing the global solar coronal magnetic field structure and evolution of the Sun, we calculate the multipole components of the solar magnetic field using the WSO data from 1976 to 2019. The prominent cycle components over the last 4 solar activity cycles are axis-symmetric fields of the dipole and octupole. This implies that the current inversion driving the solar magnetic field reversal originates from the equatorial region and spreads to the whole globe. Thus, a more accurate solar dynamo model must include an explanation of the origin and evolution of such solar internal current dynamics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.708-713
• /
• 2013

KARI is developing a solar-electric powered HALE UAV(EAV-3). For demonstrating the technology, EAV-2H, a down-scaled version of EAV-3, is developed and after EAV-2H's initial flight test, the directional stability and control need to be improved. Thus, the vertical tail and rudder of EAV-2H are redesigned with Advanced Aircraft Analysis(AAA). Size of the rudder is increased from mean chord ratio of rudder to vertical tail, $C_r/C_v(%)=30$ to $C_r/C_v(%)=60$ and size of the vertical tail is reduced 15%. As a result, the directional control to side wind($v_1$) is improved to sideslip angle, ${\beta}(deg)=25^{\circ}$ and $v_1(m/sec)=3.54$. Also, variation of airplane side force coefficient with sideslip angle ($C_{y_{\beta}}$) and variation of airplane side force coefficient with dimensionless rate of change of yaw rate ($C_{y_r}$) are reduced 15% and 22%, respectively to minimize the effect of side wind. The empennage design of EAV-2H is verified with flight tests and applied to design of KARI's solar-electric-powered EAV-3.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.59-66
• /
• 2018

Using hydrogen fuel is expected to be suitable as a reciprocating internal combustion engine with heightened interest in HALE(High Altitude Long Endurance) UAV(Unmanned Aerial Vehicle). Hydrogen is hightest energy density per mass so it can continue to charge for long periods of time and have positive part of the environmental effects. However, it is estimated that there is less research on hydrogen fuel engine currently applied, and many studies need to be done. Depending on the operation, there are factors that result in supercooling due to reduced radiation or reduce cooling performance due to low air density. Therefore, the experiment was to change the temperature of the cooling water and investigate the effect on engine combustions. The limitation of the stable operation range due to backfire is dominated by the excess air ratio rather than the effect of the cooling water temperature change. When the cooling water temperature increases, the volumetric efficiency decreases and the torque decreases. As the cooling water temperature decreases, the heat loss was increased and consequently the thermal efficiency was decreased.

• Journal of Engineering Education Research
• /
• v.21 no.1
• /
• pp.3-13
• /
• 2018

The purpose of this study is to propose a teaching and learning model that can effectively manage convergence education, which is one of the concerns of university education, at the level of course. The pre-collaborative instructional design stage is to prepare the operation of the convergence project course. It shares the common goal and establishes a team of relevant professors to set up the actual convergence project topic and establishes cooperation relationships with industry or community as needed. In the convergence project activity, students will be able to understand the learning objectives, learning activities, evaluation methods, and explain the subject of the convergence project by proceeding with the whole orientation. Students organize teams of interest and conduct learning and design activities on convergence technologies and present their results. In the educational improvement activities, professors will share the lesson process and results and discuss improvements through the improvement seminar. As a result of analyzing the effectiveness of the proposed convergence project based teaching and learning model, the convergence project experience has improved the cooperative self - efficacy for the learners and the results were confirmed that students perceived to achieve the expected learning goal and satisfied with their experience.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.1
• /
• pp.87-89
• /
• 2001

The nucleotide sequence of the domestic silkworm (Bombyx mori) mitochondrial (mt) control region and its flanking genes was determined from PCR clones. The control region of the silkworm mt genome was located between the small ribosomal RNA gene and transfer RN $A^{Met}$. This 499 bp control region hale 95.4% A+T content. Extensive comparative analysis studies performed with similar control region of other insect genomes could not reveal a highly conserved region containing conserved motifs of animal mito-chondrial genome. The remarkable feature that found in this control region was the presence of tandem motifs containing nine repetitive sequences. The potential usefulness of this motif sequences for Bombyx species or their taxonomically related species is enhanced by its unique localization in the maternally inheritance mitochondrial molecule.e.