• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.162-165
• /
• 2017

CAN (controller area network) is a standard real-time serial communication protocol, and it was developed to control various in-vehicle electronic modules. In this paper, a CAN controller was designed in Verilog HDL, based on CAN ver. 2.0A and 2.0B. The designed CAN controller was implemented in FPGA, and it was verified its operation by connecting commercial chips. Its size is about 7,800 gates when synthesized in 0.18um technology.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.657-662
• /
• 2004

The low-power design of the digital hearing aid is indispensable to achieve the compact portable device with long battery duration. In this paper, new low-power adaptive filter structure is proposed based on distributed arithmetic(DA). By modifying the DA technique, the proposed decimation filter structure can significantly reduce the power consumption and implementation area. Through Verilog-HDL coding, cell occupation of the proposed structure is reduced to 33.49% in comparison with that of the conventional multiplier structure. Since Verilog-HDL simulation processing time of the two structures are same, it is assumed that the power consumption or implementation area is proportional to the cell occupation in the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.388-397
• /
• 2002

We designed a SIMD-DSP/FPU that can efficiently improve multimedia processing performance when integrated into high-performance embedded microprocessors. We proposed partitioned architectures and new schemes for several functional units to reduce chip area. Sharing functional units reduces the area of FPU significantly. The proposed architecture is modeled in HDL and synthesized with a 0.35$\mu\textrm{m}$ standard cell library. The chip area is estimated to be about 100,000 equivalent gates. The designed unit can run at higher than 50MHz clock frequency of CPU core under the worst-case operating conditions.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.333-336
• /
• 2016

LIN (local interconnect network) is a standard low-speed serial communication protocol, and it was developed as an efficient sub-bus for automotive electronic modules. In this paper, a LIN controller was implemented in Verilog HDL, based on LIN ver. 2.2A. The implemented LIN controller was verified in FPGA, and it can be supplied as an IP to be integrated into SoC system. Its size is about 2,300 gates when synthesized in 0.18um technology.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.256-259
• /
• 2017

SENT (single edge nibble transmission) is a serial communication protocol between automotive sensors and ECU (electronic control unit). SENT exploits digital waveform, so it has a simple and cheap architecture without transceiver circuits. Usually it is exploited as an embedded communication interface in the sensors. In this paper, a SENT interface was designed in Verilog HDL, fully complying with SAE J2716. It was implemented in FPGA, and verified on a test board. When it was synthesized, the gate count is about 2,500 gates in 0.18um technology.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.411-413
• /
• 2003

본 논문에서는 ARM922T Core와 주변장치를 설계할 수 있는 100만 게이트의 FPGA를 내장한 알데라(Altera)사의 엑스칼리버(Excalibur)를 이용하여 DC모터 제어용 SoC를 설계하였다. SoC란 System on Chip의 약자로 하나의 칩 안에 프로세서와 다양한 목적의 주변장치들을 집적하는 것을 말한다. 모터를 구동하기 위한 PWM신호 생성기를 하드웨어 설계언어(Hardware Description Language)로 구현하고 시뮬레이션을 통해 설계모듈을 검증하였다. 이렇게 검증한 PWM 생성기 모듈과 ARM922T Core를 합성하여 SoC를 설계하였다. PWM 생성기 모들을 구성하는 내부의 각 분분을 VerilogHDL로 코딩하여 심볼로 만들어 통합하는 방식으로 설계를 하였으며 실제 모터를 구동하기 위해서 프로세서가 동작할 수 있도록 C언어로 프로그램하여 함께 칩에 다운로드하여 테스트를 하였다. SoC를 기반으로한 시스템 설계의 장점은 시스템이 간단해지고 고속의 동작이 가능하며 회로의 검증 및 다양한 시뮬레이션이 용이하다는데 있다.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.649-651
• /
• 2012

본 논문에서는 Core-A를 이용한 실시간 영상 신호 처리 SoC 설계와 검증에 대해 기술한다. 영상 신호 처리를 위한 방식으로 SoC를 사용하였으며 영상 처리를 위한 ISP를 설계하였다. 영상 처리를 위한 마이크로프로세서는 코드밀도를 높이고 Verilog HDL을 사용하여 기술되어 여러 응용분야에서 최적화할 수 있는 국내에서 개발된 Core-A를 사용하였다. 본 논문에서 제안한 SoC는 Verilog HDL언어로 설계 되었고, 기본 SoC의 구조는 Core-A, AMBA Bus, ISP, Memory controller, Uart로 구성하였다. 구현된 SoC는 다양한 영상 신호 처리를 지원하여 향후 영상압축 인코더의 실시간 이미지 처리용 소스로 사용할 수 있고 신호 처리 알고리즘 검증용에도 유용하게 사용될 수 있을 것으로 보인다. 설계 검증을 위해 먼저 FPGA를 이용하여 검증하였으며 TSMC $0.18{\mu}m$ CMOS공정으로 합성한 결과 동작주파수는 50MHz, 전체 게이트 수 86.1k로 확인되었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.485-488
• /
• 2009

The class of BCH codes is a large class of error correction codes. HDL implementation of BCH code generator to change code rate. and used System Generator, and implemented hardware to FPGA. Loaded bit stream to a FPGA board in order to verify this design to Hardware co-simulation from these results. Also, compared as investigated the maximum action frequency through timing analysis and resource of logic in order to evaluate performance of BCH code generator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.335-342
• /
• 2021

By using HLS when developing a communication system FPGA, HDL code can be automatically generated from a little modified C/C++ source code used for performance verification, which has the advantage of shortening the development period. In this paper, a method of designing a telemetry standard 106-17 LDPC decoder in C language is proposed using Xilinx's Vivado HLS, and by synthesizing Spartan-7 and Kintex-7 as target devices, throughput and FPGA utilization rate was compared.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.37-43
• /
• 2009

The new still image compression standard JPEG2000 is consisted of DWT and EBCOT. In this paper, proposed and designed new algorithm in efficient EBCOT. BPC based on the contort. Proposed BPC Algorithm is forecasted coding pass using Sigstage, column, mpass value. BAC design apply 4-pipeline stage. EBCOT designed using Verilog HDL. Verification and Synthesis using Xillinx FPGA technology.