• Korean journal of food and cookery science
• /
• v.29 no.3
• /
• pp.283-289
• /
• 2013

We manufactured the sausages replaced part (8%) of the pork fat (20.8%) with pepper seed powder (1%) and pepper seed oil (7%). The treatment of pepper seed did not affect pH and microbial quality, but decreased TBARS and VBN of sausages. Although the addition of pepper seed hardly changed textural properties of sausages except for increasing cohesiveness, it enhanced sensory characteristics such as taste, appearance, and overall acceptability. As expected, significant reductions were observed in the content of calorie, total fat, saturated fat, and sodium by replacing pork fat with pepper seed oil and pepper seed powder in sausages. Therefore, pepper seed is good enough to improve the sensory and nutritional quality of sausages.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.283-292
• /
• 2022

A nonlinear vibrational analysis of sandwich curved panels having multi-scale face sheets has been performed in this article based on differential quadrature method (DQM). All mechanical properties of multi-scale skins have been established in the context of three-dimensional Mori-Tanaka scheme for which the influences of glass fibers and random carbon nanotubes (CNTs) have been taken into account. The governing equations for sandwich the panel have been developed based upon thin shell formulation in which geometry nonlinearities have been taken into account. Next, DQ approach has been applied to solve the governing equations for determining the relationships of frequencies with deflections for curved panels. It will be demonstrated that the relationships of frequencies with deflections are dependent on the changing of CNT weight fractions, fibers alignment, fibers volume, panel radius and skin thickness.

• Communications for Statistical Applications and Methods
• /
• v.22 no.3
• /
• pp.277-283
• /
• 2015

Pickands constant $H_{\alpha}$ appears in the classical result about tail probabilities of the extremes of Gaussian processes and there exist several different representations of Pickands constant. However, the exact value of $H_{\alpha}$ is unknown except for two special Gaussian processes. Significant effort has been made to find numerical approximations of $H_{\alpha}$. In this paper, we attempt to compute numerically $H_{\alpha}$ based on its representation derived by $H{\ddot{u}}sler$ (1999) and Albin and Choi (2010). Our estimates are compared with the often quoted conjecture $H_{\alpha}=1/{\Gamma}(1/{\alpha})$ for 0 < ${\alpha}$ ${\leq}$ 2. This conjecture does not seem compatible with our simulation result for 1 < ${\alpha}$ < 2, which is also recently observed by Dieker and Yakir (2014) who devised a reliable algorithm to estimate these constants along with a detailed error analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.283-287
• /
• 2017

Recently, Ni-InGaAs has been required for high-performance III-V MOSFETs as a promising self-aligned material for doped source/drain region. As downscaling of device proceeds, reduction of contact resistance ($R_c$) between Ni-InGaAs and n-InGaAs has become a challenge for higher performance of MOSFETs. In this paper, we compared three types of sample, vacuum, 2% $H_2$ and 4% $H_2$ annealing condition in rapid thermal annealing (RTA) step, to verify the reduction of $R_c$ at Ni-InGaAs/n-InGaAs interface. Current-voltage (I-V) characteristic of metal-semiconductor contact indicated the lowest $R_c$ in 4% $H_2$ sample, that is, higher current for 4% $H_2$ sample than other samples. The result of this work could be useful for performance improvement of InGaAs n-MOSFETs.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.283-288
• /
• 2015

Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-TiC composite powders which are fabricated by high-energy ball-milling. A powder mixture of Fe and TiC is prepared in a planetary ball mill at a rotation speed of 500 rpm for 1h. Pressureless sintering is performed at 1100, 1200 and $1300^{\circ}C$ for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of $1050^{\circ}C$, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of $50^{\circ}C$, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts show incomplete densification with a relative denstiy of 86.1% after sintering at $1300^{\circ}C$ for 3h. Spark-plasma sintering at $1050^{\circ}C$ for 10 min exhibits nearly complete densification of 98.6% relative density under the sintering pressure of 50 MPa.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.283-292
• /
• 2011

This paper proposed a new multi-level inverter topology based on a H-bridge with two switches and two diodes connected to the DC-link. The output voltage of the proposed topology is quite closer to a sinusoidal waveform compared with a typical single phase inverter. The proposed multi-level inverter is applicable to a power conditioning system for renewable energy sources, and it can be also used as a building block of a cascaded multi-level inverter for a high voltage application. In case of conventional H-bridge type or NPC type multi-level inverter, 8 controllable switches are used to obtain a 5 level output voltage, but the proposed multi-level inverter requires only 6 controllable switches. Thus the circuit configuration is quite simple, reliable and cost-effective implementation is possible. The efficiency can be improved owing to the reduction of the switching loss. A new PWM method based on POD modulation is suggested which requires only one carrier signal. The switching sequence to make the capacitor voltage balanced is also considered. The feasibility is studied through simulation and experiment.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.4
• /
• pp.283-288
• /
• 2004

The pharmacokinetics of nifedipine was studied after oral coadministration of nifedipine (5 mg/kg) with quercetin (1.5, 7.5, 15 and 30 mg/kg, respectively) and 0.5 h or 3days pretreatment with quercetin (1.5 and 7.5mg/kg) in rabbits. Pretreatment of quercetin significantly (p<0.05, at 0.5 h; p<0.01, at 3 days) increased the plasma concentration of nifedipine, but not significant in coadministraiton. The area under the plasma concentration-time curve (AUC) and the peak concentration $(C_{max})$ of nifedipine pretreated with quercetin were increased significantly (p<0.05, at 0.5 h; p<0.01, at 3 days) compared to the control. By coadministration of quercetin, only 7.5 mg/kg of quercetin increased plasma AUC and $C_{max}$ of nifedipine significantly (p<0.05) compared to the control. Plasma AUC of intravenous nifedipine (1 mg/kg) is $4235\;{\pm}\;1192\;ng/ml{\cdot}hr$. Pretreatment of quercetin significantly (p<0.05, at 0.5 h; p<0.01, at 3 days) increased the absolute bioavailability (AB%) of nifedipine to 23.9-29.2% compared to the control (17.8%). Coadministration of quercetin showed no significant effect on the AB% of nifedipine except for 7.5 mg/kg. It is suggested that quercetin alters disposition of nifedipine by inhibition of P-glycoprotein efflux pump and its first-pass metabolism. The dosage of nifedipine should be adjusted when it is administered chronically with quercetin in a clinical situation.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.283-292
• /
• 2002

Electronic boards of Far-ultraviolet IMaging Spectrograph (FIMS) should be designed to maintain their performances, and their temperatures should be remained within the allowed temperatures in operational environments. Thermal analysis at the electronic board level has been performed, and it is confirmed the electronics parts could be kept within their allowed temperature ranges.

• Journal of Powder Materials
• /
• v.29 no.4
• /
• pp.283-290
• /
• 2022

A Cu-15Ag-5P filler metal (BCuP-5) is fabricated on a Ag substrate using a high-velocity oxygen fuel (HVOF) thermal spray process, followed by post-heat treatment (300℃ for 1 h and 400℃ for 1 h) of the HVOF coating layers to control its microstructure and mechanical properties. Additionally, the microstructure and mechanical properties are evaluated according to the post-heat treatment conditions. The porosity of the heat-treated coating layers are significantly reduced to less than half those of the as-sprayed coating layer, and the pore shape changes to a spherical shape. The constituent phases of the coating layers are Cu, Ag, and Cu-Ag-Cu3P eutectic, which is identical to the initial powder feedstock. A more uniform microstructure is obtained as the heat-treatment temperature increases. The hardness of the coating layer is 154.6 Hv (as-sprayed), 161.2 Hv (300℃ for 1 h), and 167.0 Hv (400℃ for 1 h), which increases with increasing heat-treatment temperature, and is 2.35 times higher than that of the conventional cast alloy. As a result of the pull-out test, loss or separation of the coating layer rarely occurs in the heat-treated coating layer.

• Corrosion Science and Technology
• /
• v.23 no.4
• /
• pp.283-288
• /
• 2024

Hot-dip Zn-Mg-Al coatings have a complex microstructure consisting of Zn, Al, and MgZn₂ phases. Its crystal structure depends on alloy content and cooling rates. Microstructure and corrosion resistance of these coatings might be affected by heat treatment. To investigate effect of heat treatment on microstructure and corrosion resistance of Zn-Mg-Al coatings, Zn-1.5%Mg-1.5%Al coated steel was heated up to 550 ℃ at a heating rate of 80 ℃/s and cooled down to room temperature. At above 500 ℃, the ternary phase of Zn-MgZn₂-Al was melted down. Only Zn and MgZn₂ phases remained in the coating. Heat- and non-heat-treated specimens showed similar corrosion resistance in Salt Spray Test (SST). When a Zn-3.0%Mg-2.5%Al coated steel was subjected to heat treatment at 100 ℃ or 300 ℃ for 200 h and compared with GA and GI coated steels, the microstructure of coatings was not significantly changed at 100 ℃. However, at 300 ℃, most Al in the coating reacted with Fe in the substrate, forming a Fe-Al compound layer in the lower part of the coating. MgZn₂ was preferentially formed in the upper part of the coating. As a result of SST, Zn-Mg-Al coated steels showed excellent corrosion resistance, better than GA and GI.