• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.299-304
• /
• 2001

An approach is developed for parametric investigation of the influence of the surface roughness on thermohydrodynamic analysis with film conditions which systemically occur in journal bearings. A parametric investigation is performed for predicting the bearing behaviors such as pressure and temperature distributions in lubricating films between the stationary and moving surfaces determined by absorbed layers and interfaces on the statistical method for rough surface with Gaussian distribution. The layers expressing the effects of surface roughness are expressed as functions of the standard deviations (${\sigma}$) of each surface and surface orientation (j) to explain the flow patterns between both rough surfaces. The coupled effect of surface roughness and shear zone dependency on hydrodynamic pressure and temperature has been found by solving the present model in non-contact mode and contact mode, respectively.

• 새물리
• /
• 제68권12호
• /
• pp.1324-1330
• /
• 2018

The elastic scatterings for the ${\alpha}+^{40}Ca$ and the ${\alpha}+^{58}Ni$ systems at $E_{lab}=240MeV$ have been analyzed within the framework of the Coulomb-modified Glauber model using two kinds of Gaussian density parameters for the target nuclei. The first one is to use Gaussian density parameters obtained from the root-mean-square radius. The second one is to use parameters calculated by matching the Gaussian density to the two-parameter Fermi density. The results with surface-matched Gaussian densities provide reasonable agreement with the experimental data, but the results without matching do not. The oscillatory structures observed in the angular distributions of both system can be interpreted as being due to the strong interference between the near-side and the far-side scattering amplitudes. The differences between the phase shifts obtained from the two methods are examined. We also investigate the effect of these differences on the differential and reaction cross sections, the transmission functions and the strong absorption radii.

• 대한수학회보
• /
• 제61권2호
• /
• pp.401-419
• /
• 2024

Let K, H, K_II and H_II be the Gaussian curvature, the mean curvature, the second Gaussian curvature and the second mean curvature of a timelike tubular surface T_γ(α) with the radius γ along a timelike curve α(s) in Minkowski 3-space E³₁. We prove that T_γ(α) must be a (K, H)-Weingarten surface and a (K, H)-linear Weingarten surface. We also show that T_γ(α) is (X, Y)-Weingarten type if and only if its central curve is a circle or a helix, where (X, Y) ∈ {(K, K_II), (K, H_II), (H, K_II), (H, H_II), (K_II , H_II)}. Furthermore, we prove that there exist no timelike tubular surfaces of (X, Y)-linear Weingarten type, (X, Y, Z)-linear Weingarten type and (K, H, K_II, H_II)-linear Weingarten type along a timelike curve in E³₁, where (X, Y, Z) ∈ {(K, H, K_II), (K, H, H_II), (K, K_II, H_II), (H, K_II, H_II)}.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.130-138
• /
• 1995

Machined graphite/epoxy surfaces were studied by using SEM (Scanning Electron Microscopy), surface profilometry and its analysis to determine suitable surface describing parameters for machined unidirectional and multidirectional laminate composite. The surface roughness and profile are found to be highly depdndent on the fiber layup direction and the measurement direction. It was possible to machine 90 .deg. and -45 .deg. plies due to the adjacent plies, which were holding those plies. It was found that the microgeometrical variations in terms of roughness parameters $R_{a}$ without $D_{y}$(Maximum Damage Depth) region and $D_{y}$are better descriptors of the machined laminate composite surface than commonly used roughness parameters $R_{a}$and $R_{max}$ The characteristics of surface profiles in laminate composite are well represented in CPD (Cumulative Probability Distribution) plot and PPD (Percentage Probability Density) plot. Edge-trimmed multidirectional laminate surfaces are Gaussian and random for profiles measured along the tool movement direction, they are periodic and non-Gaussian in the direction perpendicular to the tool movement.t.ent.t.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1014-1019
• /
• 2013

Signal processing techniques based on fractional order calculus have been successfully applied in analyzing heavy-tailed non-Gaussian signals. It was found that the surface EMG signals from the muscles having nuero-muscular disease are best modeled by using the heavy-tailed non-gaussian random processes. In this regard, this paper describes an application of digital fractional order lowpass differentiators(FOLPD, weighted FOLPD) based on the fractional order calculus in detecting peaks of surface EMG signal. The performances of the FOLPD and WFOLPD are analyzed based on different filter length and varying MUAP wave shape from recorded and simulated surface EMG signals. As a results, the WFOLPD showed better SNR improving factors than the existing WLPD and to be more robust under the various surface EMG signals.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.21-27
• /
• 1991

이 논문에서는 periodic 균일 knot vector 뿐만아니라 open 균일 knot vector를 사용하여 선체형상을 Bi-cubic B-spline곡면으로 수식화하는 방법을 보인다. B-spline곡면을 형성하기 위한 B-spline control vertex는 기본 함수의 pseudoinverse matrix를 사용하여 결정된다. 주어진 offset과 형성된 선체곡면을 비교한 결과 잘 일치하였다. 곡면의 순정을 검토하기 위하여 Gaussian곡률을 많은 작은 곡면조각에 대해 계산하여 흑백의 농도 차이를 이용하여 도시화하였다.

• 대한수학회지
• /
• 제45권1호
• /
• pp.41-61
• /
• 2008

We study Lorentzian surfaces with the constant Gaussian curvatures or the constant mean curvatures in the 3-dimensional Lorentzian space and their transformations. Such surfaces are associated to the Lorentzian Grassmannian systems and some transformations on such surfaces are given by dressing actions on those systems.

• 대한수학회논문집
• /
• 제21권1호
• /
• pp.165-175
• /
• 2006

We associate the surfaces of constant Gaussian curvature K = 1 with no umbilics to a subclass of the solutions of $O(4,\;1)/O(3){\times}O(1,\;1)-system$. From this correspondence, we can construct new K = 1 surfaces from a known K = 1 surface by using a kind of dressing actions on the solutions of this system.

• 대한수학회논문집
• /
• 제33권1호
• /
• pp.247-259
• /
• 2018

Factorable surfaces, i.e. graphs associated with the product of two functions of one variable, constitute a wide class of surfaces in differential geometry. Such surfaces in the pseudo-Galilean space with zero Gaussian and mean curvature were obtained in [2]. In this study, we provide new results relating to the factorable surfaces with non-zero constant Gaussian and mean curvature.

• 호남수학학술지
• /
• 제46권2호
• /
• pp.249-266
• /
• 2024

In this work, we study time-like and space-like surfaces invariant by a group of translation isometries of the half-space model ℋ³₁ of the anti-de Sitter space ℍ³₁ . We determine all such surfaces with constant mean curvature and constant Gaussian curvature. We also obtain umbilical surfaces of ℋ³₁.