• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1131-1137
• /
• 2015

Gallium nitride (GaN) is a promising material for next-generation high-power applications due to its wide bandgap, high breakdown field, high electron mobility, and good thermal conductivity. From a structure point of view, the vertical device is more suitable to high-power applications than planar devices because of its area effectiveness. However, it is challenging to obtain a completely upright vertical structure due to inevitable sidewall slope in anisotropic etching of GaN. In this letter, we design and analyze the enhancement-mode n-channel vertical GaN MOSFET with variation of sidewall gate angle by two-dimensional (2D) technology computer-aided design (TCAD) simulations. As the sidewall slope gets closer to right angle, the device performances are improved since a gradual slope provides a leakage current path through the bulk region.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.125-125
• /
• 2011

Silicon-oxide-silicon nitride-oxide silicon (SONOS) 구조를 가진 플래쉬 메모리 소자는 기존의 floating gate (FG)를 이용한 플래쉬 메모리 소자에 비해 구동 전압이 낮고, 공정 과정이 간단할 뿐만 아니라 비례 축소가 용이하다는 장점 때문에 차세대 플래쉬 메모리 소자로 많은 연구가 진행되고 있다. SONOS 구조를 가진 플래쉬 메모리에서 소자의 셀 사이즈가 감소함에 따라 발생하는 인접한 셀 간의 간섭 현상에 대한 연구가 소자의 성능 향상에 필요하다. 본 연구에서는 SONOS 구조를 가진 플래쉬 메모리에서 소자의 셀 사이즈가 작아짐에 따라 발생하는 인접한 셀 간의 간섭 현상에 대해 recess field 의 깊이에 따른 변화를 조사하였다. 게이트의 길이가 30nm 이하인 SONOS 구조를 가진 플래쉬 메모리 소자의 구조에서 recess field의 깊이의 변화에 따른 소자의 전기적 특성을 삼차원 시뮬레이션 툴인 sentaurus를 사용하여 계산하였다. 커플링 효과를 확인하기 위해 선택한 셀의 문턱전압이 주변 셀들의 프로그램 상태에 미치는 영향을 관찰하였다. 본 연구에서는 SONOS 구조를 가진 플래쉬 메모리에서 셀 사이에 recess field 를 삽입함으로 인접 셀 간 발생하는 간섭현상의 크기를 줄일 수 있음을 시뮬레이션 결과를 통하여 확인하였다. 시뮬레이션 결과는 recess field 깊이가 증가함에 따라 인접 셀 간 발생하는 간섭현상의 크기가 감소한 반면에 subthreshold leakage current가 같이 증가함을 보여주었다. SONOS 구조를 가진 플래쉬 메모리 소자의 성능향상을 위하여 recess field의 깊이를 최적화 할 필요가 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.977-982
• /
• 2005

Al/AlN/n-type 6H-SiC (0001) MIS structures were prepared by AlN layers on vicinal 6H-SiC(0001) substrates with reactive RF magnetron sputtering method. The AlN films were annealed at $900^{\circ}C$, $N_2$ atmosphere lot 1 minutes showed the best result. With XRD analysis, AlN(0002) peak was clearly found. The typical dielectric constant value of the AlN film in the MIS capacitors was obtained as 8.4 from photo C-V. Also, the gate leakage current density of the MlS capacitor was $10^{-10}\;A/cm^2$ order within the electric field of 1.8 MV/cm. Finally, the amount of interface trap densities, $D_{it}$, was evaluated as $5.3\times10^{10}\;eV^{-1}cm^{-2}$ at (Ec-0.85) eV.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.329-334
• /
• 2008

Aluminum oxide films were deposited on n-type GaN substrates by RF magnetron sputtering technique for MIS devices applications using optimized conditions, Well-behaved C - V characteristics were obtained measured in MIS capacitors structures. The calculated interface trap density measured at $300^{\circ}C$ was about $9\times10^{10}/cm^2$ eV in the upper bandgap. The gate leakage current densities of the MIS structures were about $10^{-9}A/cm^2$ and about $10^{-4}A/cm^2$ measured at room temperature and at $300^{\circ}C$ for $a{\pm}1MV/cm$, respectively. These results indicate that the interface property of this structure is enough quality to MIS devices applications.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1463-1465
• /
• 1994

The electrical characteristics of $Al/Ta_2O_5/Si$ metal-oxide-semiconductor (MOS) capacitors were studied. $Ta_2O_5$ films on p-type silicon had been prepared by ionized cluster beam epitaxy technique (ICBE). This $Ta_2O_5$ films have low leakage current, high breakdown strength and low flat band shift. In this research, a single crystalline cpitaxial film of $Ta_2O_5$ has been grown on p-Si wafer using an ICBE technique. The native oxide layer ($SiO_2$) on the silicon substrate was removed below $500^{\circ}C$ by use of an accelerated arsenic ion beam, instead of a high temperature deposition. $Ta_2O_5$ films formed by ICBE technique can be received considerable attention for applications to coupling capacitors, gate dielectrics in MOS devices, and memory storage capacitor insulator because of their high dielectric constants above 20 and low temperature process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.998-1001
• /
• 2009

A new flexible TFT backplane structure with improved mechanical reliability is proposed. Amorphous indium-gallium-zinc-oxide (a-IGZO) thin film transistors based on this structure have been fabricated on a polyimide substrate, and the resultant mechanical durability has been evaluated in a cyclic bending test. The panel can withstand 10,000 bending cycles at a bending radius of 5 mm without any noticeable TFT degradation. After 10K bending cycles, the change of threshold voltage, mobility, sub-threshold slope, and gate leakage current were only -0.22V, -0.13$cm^2$/V-s, -0.05V/decade, and $-3.05{\times}10^{-13}A$, respectively.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.65-66
• /
• 2006

AIGaN/GaN 고전자 이동도 트랜지스터 (High Electron Mobility Transistors, HEMTs)는 와이드 밴드-갭과 높은 항복 전계 및 우수한 채널 특성으로 인해 마이크로파 응용분야와 전력용 반도체에서 각광받고 있다. 최근, 전력 응용분야에서 요구되는 높은 항복 전압과 출력, 우수한 주파수 특성을 획득하기 인해 이중 게이트 AIGaN/GaN HEHTs에 관한 연구가 발표되고 있다. 본 논문에서는 AIGaN/GaN HEMTs에 이중 게이트를 적용하여, 두 개의 게이트와 드레인, 소스의 누설 전류를 각각 측정하여 이중 게이트 AIGaN/GaN HEMTS의 누설 전류 메커니즘을 분석하였다. 또한 제안된 소자의 $SiO_2$ 패시베이션 전 후의 누설 전류 특성을 비교하였다. $SiO_2 $ 패시베이션되지 않은 소자의 누설 전류는 드레인, 소스와 추가 게이트로부터 주 게이트로 흐른 반면, 패시베이션 된 소자 누설 전류는 드레인으로부터 주 게이트 방향의 누설 전류만 존재하였다. $SiO_2$ 패시베이션 된 소자의 누설 전류는 (87.31 nA ) 패시베이션 되지 않은 소자의 누설 전류 ( $8.54{\mu}A$ )에 비해 의게 감소하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1017-1021
• /
• 2007

To implement tera bit level non-volatile memories of low power and fast operation, proving statistical reproductivity and satisfying reliabilities at the nano-scale are a key challenge. We fabricate the charge trapping nano scaled SONOS unit memories and 64 bit flash arrays and evaluate reliability and performance of them. In case of the dielectric stack thickness of 4.5 /9.3 /6.5 nm with the channel width and length of 34 nm and 31nm respectively, the device has about 3.5 V threshold voltage shift with write voltage of $10\;{\mu}s$, 15 V and erase voltage of 10 ms, -15 V. And retention and endurance characteristics are above 10 years and $10^5$ cycle, respectively. The device with LDD(Lightly Doped Drain) process shows reduction of short channel effect and GIDL(Gate Induced Drain Leakage) current. Moreover we investigate three different types of flash memory arrays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.743-746
• /
• 2000

Metal-ferroelectric-insulator-semiconductor(MFIS) devices using Pt/$LiNbO_3$/Si structure were successfully fabricated. The dielectric constant of the AIN film calculated from the capacitance in the accumulation region in the capacitance-voltage(C-V) curve was about 8.2. The gate leakage current density of MIS devices using a aluminum electrode showed the least value of 1$\times$$1O^{-8}$A/$cm^2$ order at the electric field of 500kV/cm. The dielectric constant of $LiNbO_3$film on AIN/Si structure was about 23 derived from 1MHz capacitance-voltage (C-V) measurement and the resistivity of the film at the field of 500kV/cm was about 5.6$\times$ $1O^{13}$ $\Omega$.cm.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.988-993
• /
• 2019

Over the past decades, the semiconductor industry has continuously scaled down the size of semiconductor devices to increase those performance and to integrate them at higher density on the chip. However, facing the reduction of gate control, higher leakage current, and short channel effect, there is a growing interest in next-generation semiconductors which can overcome these problems. In this paper, we discuss digital circuit design techniques using CNTFET(Carbon NanuTube Field Effect Transistor), which are attracting attention as candidates for the next generation of semiconductors. Since the structure of CNTFETs are clearly different from the structure of the structure of conventional MOSFETs, we will discuss how to utilize existing digital circuit methodology when designing digital circuits using the CNTFETs, and then simulate the performance differences between the two devices.