고온 급속 열처리를 행한 $LiNbO_3Si$/(100) 구조를 가지고 여러 가지 전극을 사용하여 금속/강유전체/반도체 커패시터를 제작하였으며, 제작한 커패시터의 비휘발성 메모리 응용 가능성을 확인하였다. MFS 커패시터의 C-V 특성 곡선에서는 LiNbO$_3$박막의 강유전성으로 인한 히스테리시스 특성이 관측되었으며, 1 MHz C-V 특성 곡선의 축적 영역에서 산출한 비유전율은 약 25 이었다. Pt 전극을 사용하여 제작한 커패시터에서는 인가 전계 500 kV/cm 범위에서 $1\times10^{-8}$ A/cm 이하의 우수한 누설전류 특성이 나타났다. midgap 부근에서의 계면 준위 밀도는 약 $10^{11}\textrm{cm}^2$.eV 이었으며, 잔류분극 값은 약 1.2 $\muC/\textrm{cm}^2$ 였다. Pt 전극과 A1 전극 모두 500 kHz 주파수의 바이폴러 펄스를 인가하면서 측정한 피로 특성에서 $10^{10}$ cycle 까지 측정된 잔류 분극 값이 초기 값과 같았다.
In this paper, the characteristics of channel hot electron (CHE) injection for the write operation in a NOR-type SONOS flash memory with common source line were investigated. The thicknesses of he tunnel oxide, the memory nitride, and the blocking oxide layers for the gate insulator of the fabricated SONOS devices were $34{\AA}$, $73{\AA}$, and $34{\AA}$, respectively. The SONOS devices compared to floating gate devices have many advantages, which are a simpler cell structure, compatibility with conventional logic CMOS process and a superior scalability. For these reasons, the introduction of SONOS device has stimulated. In the conventional SONOS devices, Modified Folwer-Nordheim (MFN) tunneling and CHE injection for writing require high voltages, which are typically in the range of 9 V to 15 V. However CHE injection in our devices was achieved with the single power supply of 5 V. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve were investigated. The memory window of about 3.2 V and the write speed of $100{\mu}s$ were obtained. Also, the disturbance and drain turn-on leakage during CHE injection were not affected in the SONOS array. These results show that CHE injection can be achieved with a low voltage and single power supply, and applied for the high speed program of the SONOS memory devices.
본 연구에서는 N -채널 실리콘 게이트 제작기술에 의하여 일련의 크기를 가지는 커페시터와 트렌지스터들이 제작되었다. 그 결과 다양한 이온 주입 조걸, 즉 B 의 경우 에너지 30keV∼60keV와 도오스 3 × 10 ~ 5 × 10 개/㎠ 그리고 P 의 경우 에너지 1001keV∼ 175keV와 4 ×10 ~ 7×11개/㎠ 도오스 영역에서 이들에 대한 D.C. 인자들의 측정치들이 이론적인 계산치들과 비상, 분석되어 있다. 이 D.C. 인자들에는 threshold전압, 공핍층의 폭, 게이트 산화물 두께, 표면상태, 가동 하전입자 밀도, 전자의 이동도 그리고 마지막으로 누설전류가 있는데, 이중 실제 MOS의 제작에 있어서 특허 중요한 threshold전압에 있어서는, 커어브트레이서와 C - V plot을 통하여 측정된 값들이 실제 재산에서 이용된 SUPREM II 컴퓨우터 프로그램에 의한 결과와 훌륭히 접근하고 있다. 그 밖에 여기나온 D.C.인자들 중에서 도오핑 수준은 기판의 역 게이트 바이어스에서 threshold전압들로 부터 계산된 것이고, 역전도는 정의된 subthreshold 기울기로 부터 추산된 것임을 밝혀 둔다. 마지막으로 이와같은 D. C. 시험 결과들을 종합적으로 평가해 볼 때 만들어진 커페시터와 트렌지스터들이 N -채널 MOS I. C. 기억소자용으로 적합함을 보여주고 있다.
Mobile 기기로 둘러싸여있는 현대의 환경에서 Flash memory에 대한 중요성은 날로 더해가고 있다. Flash memory의 가격 경쟁력 강화와 사용되는 기기의 소형화를 위해 flash memory의 비례축소가 중요한 문제로 부각되고 있다. 그러나 다결정 실리콘을 플로팅 게이트로 이용하는planar flash memory 소자의 경우 비례 축소 시 short channel effect 와 leakage current, subthreshold swing의 증가로 인한 성능저하와 같은 문제들로 인해 한계에 다다르고 있다. 이를 해결하기 위해 CTF 메모리 소자, nanowire FET, FinFET과 같은 새로운 구조를 가지는 메모리소자에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 22 nm 게이트 크기의 FinFET 구조를 가지는 플래시 메모리소자에서 fin의 두께와 높이의 변화에 따른 메모리 소자의 전기적 특성을 3-dimensional 구조에서 technology computer aided design ( TCAD ) tool을 이용하여 시뮬레이션 하였다. 본 연구에서는 3D FinFET 구조를 가진 플래시 메모리에 대한 시뮬레이션 하였다. FinFET 구조에서 채널영역은 planar 구조와 다르게 표면층이 multi-orientation을 가지므로 본 계산에서는 multi-orientation Lombardi mobility model을 이용하여 계산하였다. 계산에 사용된 FinFET flash memory 구조는 substrate의 도핑농도는 $1{\times}10^{18}$로 하였으며 source, drain, gate의 도핑농도는 $1{\times}10^{20}$으로 설정하여 계산하였다. Fin 높이는 28 nm로 고정한 상태에서 fin의 두께는 12 nm부터 28nm까지 6단계로 나누어서 각 구조에 대한 프로그램 특성과 전기적 특성을 관찰 하였다. 계산결과 FinFET 구조의 fin 두께가 두꺼워 질수록 채널형성이 늦어져 threshold voltage 값이 커지게 되고 subthreshold swing 값 또한 증가하여 전기적 특성이 나빠짐을 확인하였다. 각 구조에서의 전기장과 전기적 위치에너지의 분포가 fin의 두께에 따라 달라지므로써 이로 인해 프로그램 특성과 전기적 특성이 변화함을 확인하였다.
Catalytic chemical vapor deposition (Cat-CVD) has been developed to deposit alumina(Al$_2$O$_3$) thin films on silicon (Si) crystal using N$_2$ bubbled tir-methyl aluminium [Al(CH$_3$)$_3$, TMA] and molecular oxygen (O$_2$) as source species and tungsten wires as a catalyzer. The catalyzer dissociated TMA at approximately 600$^{\circ}C$ The maximum deposition rate was 18 nm/min at a catalyzer temperature of 1000 and substrate temperature of 800$^{\circ}C$. Metal oxide semiconductor (MOS) diodes were fabricated using gates composed of 32.5-nm-thick alumina film deposited as a substrate temperature of 400oC. The capacitance measurements resulted in a relatively dielectric constant of 7, 4, fixed charge density of 1.74*10e12/$\textrm{cm}^2$, small hysteresis voltage of 0.12V, and very few interface trapping charge. The leakage current was 5.01*10e-7 A/$\textrm{cm}^2$ at a gate bias of 1V.
MFIS(Metal-ferroelectric-insulator- semiconductor) structures using silicon oxynitride(SiON) buffer layers were fabricatied and demonstrated nonvolatile memory operations. Oxynitride(SiON) films have been formed on p-Si(100) by RTP(rapid thermal process) in O$_2$+N$_2$ ambient at 1100$^{\circ}C$. The gate leakage current density of Al/SiON/Si(100) capacitor was about the order of 10$\^$-8/ A/cm$^2$ at the range of ${\pm}$ 2.5 MV/cm. The C-V characteristics of Al/LiNbO$_3$/SiON/Si(100) capacitor showed a hysteresis loop due to the ferroelectric nature of the LiNbO$_3$ thin films. Typical dielectric constant value of LiNbO$_3$ film of MFIS device was about 24. The memory window width was about 1.2V at the electric field of ${\pm}$300 kV/cm ranges.
Metal-ferroelectric-insulator-semiconductor(WFIS) capacitors using rapid thermal annealed LiNbO$_3$/AlN/Si(100) structure were fabricated and demonstrated nonvolatile memory operations. The capacitors on highly doped Si wafer showed hysteresis behavior like a butterfly shape due to the ferroelectric nature of the LiNbO$_3$ films. The typical dielectric constant value of LiNbO$_3$ film in the MFIS device was about 27, The gate leakage current density of the MFIS capacitor was 10$^{-9}$ A/cm$^2$ order at the electric field of 500 kV/cm. The typical measured remnant polarization(2P$_{r}$) and coercive filed(Ec) values were about 1.2 $\mu$C/cm$^2$ and 120 kV/cm, respectively The ferroelectric capacitors showed no polarization degradation up to 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulses of 1 MHz. The switching charges degraded only by 10 % of their initial values after 4 days at room temperature.e.
Aluminum oxide films were deposited on n-type 6H-SiC(0001) substrates by RF magnetron sputtering technique for MIS devices applications. Well-behaved C-V characteristics were obtained measured in MIS capacitors structures. The calculated interface trap density measured at $300^{\circ}C$ was about $4.6{\times}10^{10}/cm^2\;eV$ in the upper half of the bandgap. The gate leakage current densities of the MIS structures were about $10^{-8}A/cm^2$ and about $10^{-6}A/cm^2$ measured at room temperature and at $300^{\circ}C$ for a ${\pm}1\;MV/cm$, respectively These results indicate that the interface property of this structure is enough quality to MIS devices applications.
The annealing effects of $SiO_2/Si_3N_4$ stacked tunneling dielectrics were investigated. I-V characteristics of band gap engineered tunneling gate stacks consisted of $Si_3N_4/SiO_2/Si_3N_4$(NON), $SiO_2/Si_3N_4/SiO_2$(ONO) dielectrics were evaluated and compared with $SiO_2$ single layer using the MOS(Metal-Oxide-Semiconductor) capacitor structure. The leakage currents of engineered tunneling barriers (ONO, NON stacks) are lower than that of the conventional $SiO_2$ single layer at low electrical field. Meanwhile, the engineered tunneling barriers have larger tunneling current at high electrical field and improved electrical characteristics by annealing processes than $SiO_2$ layer.
Kim, Sung Yoon;Seo, Jae Hwa;Yoon, Young Jun;Kim, Jin Su;Cho, Seongjae;Lee, Jung-Hee;Kang, In Man
Journal of Electrical Engineering and Technology
/
제10권3호
/
pp.1131-1137
/
2015
Gallium nitride (GaN) is a promising material for next-generation high-power applications due to its wide bandgap, high breakdown field, high electron mobility, and good thermal conductivity. From a structure point of view, the vertical device is more suitable to high-power applications than planar devices because of its area effectiveness. However, it is challenging to obtain a completely upright vertical structure due to inevitable sidewall slope in anisotropic etching of GaN. In this letter, we design and analyze the enhancement-mode n-channel vertical GaN MOSFET with variation of sidewall gate angle by two-dimensional (2D) technology computer-aided design (TCAD) simulations. As the sidewall slope gets closer to right angle, the device performances are improved since a gradual slope provides a leakage current path through the bulk region.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.