• 동력기계공학회지
• /
• 제3권2호
• /
• pp.79-83
• /
• 1999

We implemented a system that can change laser beam directions rapidly by controlling the galvano-mirror, on which a mirror is mounted, with a computer. We show that a laser projection can be realized by programming our system properly, and that it can also be used for multiplexing 2-dimensional image information in the data storage of holographic memories efficiently.

• 정보저장시스템학회논문집
• /
• 제2권1호
• /
• pp.43-49
• /
• 2006

Fractal/angle multiplexing is a $LiNBO_3$ crystal using a X-Y Galvano mirror, and the random access concept in fractal/angle multiplexing are discussed in this paper. First, the brief introduction of the designed holographic digital data storage system is presented. Then, the average access time concept for the storage system is newly defined, and the comparison of the average access time between the holographic storage and a conventional optical disk is performed. Second, the basic simulation and experiment to find the X-Y Galvano mirror dynamics are conducted. From this analysis, we find that the average access time in our HDDS which has 6 degree scan angle is about 5 msec. This result is very high performance when it compared with the average access time of a conventional optical disk. Finally, some recording results using fractal/angle multiplexing are presented, then, the relationship between bit error rate and angle mismatch for the each multiplexing are discussed.

• 한국통신학회논문지
• /
• 제34권10B호
• /
• pp.1117-1123
• /
• 2009

DMD(Digital Micro-mirror Device)와 갈바노 스캐너를 이용한 두부 고정형 다초점 디스플레이 시스템은 초점조절이 가능하여 스테레오스코픽 디스플레이에서 발생하는 양안의 수렴작용과 단안의 초점조절 작용의 불일치에 의한 눈의 피로 문제를 해결할 수 있는 디스플레이 시스템이다. 이 시스템은 레이저 스캐닝 방법으로 각 시점에 대한 영상의 수렴점을 형성하여 관찰자 동공에 제공함으로 초점조절이 가능토록 한다. 본 논문에서는 이 다초점 디스플레이 시스템의 레이저 스캐닝 방법을 수학적으로 분석하였고, 이러한 분석에 기반 한 다초점 시스템을 제작하여 비디오카메라를 통하여 초점조절이 가능함을 보였고, 결과적으로 레이저 스캐닝 방법에 의한 다초점 시스템의 시점 형성원리가 검증되었다.

• 융합신호처리학회논문지
• /
• 제5권1호
• /
• pp.13-17
• /
• 2004

망막 촬영 및 다채널 고속 영상 획득 시스템을 개발하였다. 망막 두께 측정은 망막을 3차원으로 촬영하고 고속으로 신호처리를 할 수 있는 시스템을 요구한다. 망막에 레이저를 투사한 후에 반사되어 돌아오는 레이저의 양을 array photo diode를 이용하여 감지하며 이를 3차원 영상화하여 망막의 두께를 측정할 수 있다. 망막에 레이저를 투사하는 장치, APD 광센서를 이용한 망막 영상화 장치, 다채널 고속 A/D 변환장치 및 PCI 인터페이스를 개발하였다. polygon mirror와 galvano mirror를 이용하여 HeNe 레이저 빔을 각각 수평방향과 수직방향으로 주사하여 이미지 평면을 만들어 망막에 투사하였다. APD 어레이 광센서를 이용하여 각 층별로 나타나는 망막영상을 획득하였으며, 이를 실시간으로 A/D 변환하여 PCI 버스를 통해 컴퓨터로 전송하였다.

• 정보저장시스템학회논문집
• /
• 제7권2호
• /
• pp.85-89
• /
• 2011

In retrieving process in angle multiplexing Holographic Data Storage(HDS), It is important to search the exact recording angles. In this paper, we propose the retrieving angle searching method using pre-scan. Pre-scan method is means that rotating the galvano mirror before the retrieving process. Therefore, retrieving signals are maximized when between the galvano mirror and recoded angle are exactly matched. Through the measured signals, we will find the exact angle and compensate tangential tilt angle. The experimental results shows propose method is enough to apply the HDS.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.308-308
• /
• 2004

쾌속조형기술은 설계형상의 확인, 시작품의 제작, 금속 및 세라믹 부품에의 응용, 동시공학, 의료, 마이크로 머신 둥 제조업 전반에 걸쳐서 많은 응용이 이루어지고 있다 여러 가지의 기술들이 개발되고 이를 응용한 장비들이 생산되어 보급됨으로써 이러한 적용분야들은 점차 확대되고 있다. 본 연구에서는 분말을 소결, 적층하여 원하는 형상을 만들어내는 SLS(Selective Laser Sintering) 장비를 개발하는데 있어서 레이저 경로의 제어를 통한 분말을 소결시키는 부분인 레이저 주사 시스템(laser scanning system)을 개발하고자 한다.(중략)

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.969-975
• /
• 2009

In this paper, bonded wafer analysis system is proposed using laser beam transmission; while the transmission model is derived by simulation. Since the failure of bonded wafer stems in void existence, transmittance deviations caused by the thickness of the void are analyzed and variations of the intensity through the void or defect easily have been recognized then the testing power has been increased. In addition, large screen display on laser study has been done which resulted in acquiring a feasible technique for analysis of the whole bonding surface. In this regard, three approaches are demonstrated in which Halogen lamp, IR lamp and laser have been tested and subsequently by results comparison the optimized technique using laser has been derived.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.25-28
• /
• 2010

The micro fabrication on the mold material using picosecond laser ablation processing has been studied. We used the two kind of system with picosecond laser. First one is two mirror type scanner and telecentric f-theta lens. Second one is X-Y stage and objective lens. By using these system, the $100{\mu}m$ size chess patterning and $2{\mu}m$ size patterning was fabricated. Especially $2{\mu}m$ size patterning on the mold material can be used as the decorative rainbow color logo for industrial field. In this paper, it is proved the picosecond laser is effective tool for the laser ablation processing.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.18-25
• /
• 1996

In this study, we have developed the stereolithography system that supports the development of a products. This paper presents the development of the stereolithography system. The system is composed of hardware, software and control part. The software converts a STL file to NC data and displays the monitoring figure in control part. The hardware part deals with structure of machine. The most important theme in this paper is LG-SLCAM software. This software can generate NC data and scanning condition data from a STL file semiautimatically. On the basis of three diensional shapes, it makes data for support structure from STL file. The effectiveness of using out stereolithography system is confirmed by processes of good development.