• Journal of the Korean Vacuum Society
• /
• v.19 no.5
• /
• pp.353-359
• /
• 2010

We report the surface photovoltage (SPV) properties of $In_{0.49}Ga_{0.51}P$/GaAs heterostructure grown by metal-organic chemical vapour deposition (MOCVD). The SPV measurements were studied as a function of modulation beam intensity, modulation frequency and temperature. From a line shape analysis of room temperature derivative surface photovoltage (DSPV) spectrum, the band gap energies for GaAs and $In_{0.49}Ga_{0.51}P$ transitions were 1.400 and 1.893 eV respectively. The surface photovoltage (SPV) increases with increasing the light intensity and temperature, whereas the SPV decreases with increasing the modulation frequency. From the temperature variation of the energy gaps, we have analysis by both Varshni and Bose-Einstein type expressions.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.5-8
• /
• 2000

This paper shows the high performance as a photodetector of InGaP/GaAs HPT with 3-terminal caused by its inherent good electrical properties compared with AIGaAs/GaAs HPT. InGaP/GaAs HPT produced the high optical gain of about 61 where HPT is biased at Vc=3V, Iв=2${\mu}\textrm{A}$ with an input optical power of 1.23㎼. This is 2.5 times higher than that of AIGaAs/GaAs HPT. And we examined that the optical gain of HPTs becomes larger when operating in 3-terminal configuration rather than 2-terminal with the floating base. for a given base current of 2${\mu}\textrm{A}$, the optical gain is enhanced about 18% in the InGaP/GaAs HPT and about 27% in the AIGaAs/GaAs HPT over that of the 2-terminal device.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.134-140
• /
• 2010

We have investigated the contactless electroreflectance (CER) properties of $In_{0.5}(Ga_{1-x}Al_x)_{0.5}P$/GaAs double heterostructures grown by metal-organic chemical vapour deposition (MOCVD). The CER measurements on the sample were studied as a function of temperature, modulation voltage ($V_{ac}$), and dc bias voltage ($V_{bias}$). Five signals observed at room temperature are related to the GaAs, $In_{0.5}Ga_{0.5}P$, $In_{0.5}(Ga_{0.73}Al_{0.27})_{0.5}P$, $In_{0.5}(Ga_{0.5}Al_{0.5})_{0.5}P$, and $In_{0.5}(Ga_{0.2}Al_{0.8})_{0.5}P$ transitions, respectively. From the temperature dependence of CER spectrum, the Varshni coefficients and broadening parameters were determined and discussed. In addition, we found that the behavior of the CER amplitude for the reverse bias is larger than that of the forward.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.88-93
• /
• 1998

For the self-aligned AlGaAs/GaAs HBTs, the surface states at the interface between the extrinsic base surface and the passivation nitride is a major cause of degradation of dc characteristics. In this paper the degradation mechanisms of self-aligned AlGaAs/GaAs HBT were analyzed, and GaAs HBTs, which employed an InGaP ledge emitter structure formed by the nonself-aligned process to cover the surface of the extrinsic base and reduce the surface states, produced high reliability. Accoridng to the acceleration lifetime test, the nonself-aligned InGaP/GaAs HBTs produced very reliable dc characteristics comparing with the self-aligned AlGaAs/GaAs HBTs. The activation energy was 1.97eV and MTTF $4.8{\times}10^{8}$ hrs at $140^{\circ}C$ which satisfied the MIL standard.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.4
• /
• pp.334-338
• /
• 2003

$BCl_3$고밀도 평판형 유도결합 플라즈마(High Density Planar Inductively Coupled Plasma)를 이용하여 AlGaAs와 InGaP의 건식식각에 대하여 연구하였다. 본 실험에서는 ICP 소스파워(0∼500 W), RIE 척 파워(0-150 W), 공정압력(5∼15 mTorr)의 변화에 따른 AlGaAs와 InGaP의 식각률, 식각단면 그리고 표면 거칠기 등을 분석 하였다. 또, 공정 중 OES(Optical Emission Spectroscopy)를 이용하여 in-situ로 플라즈마를 관찰하였다. $BCl_3$ 유도결합 플라즈마를 이용한 AlGaAs의 식각결과는 우수한 수직측벽도와(>87$^{\circ}$) 깨끗하고 평탄한 표면(RMS roughness = 0.57 nm)을 얻을 수 있었다. 반면, InGaP의 경우에는 식각 후 표면이 다소 거칠어진 것을 확인할 수 있었다. 모든 공정조건에서 AlGaAs의 식각률이 InGaP보다 더 높았다. 이는 $BCl_3$ 유도결합 플라즈마를 이용하여 InGaP을 식각하는 동안 $InCl_{x}$ 라는 휘발성이 낮은 식각부산물이 형성되어 나타난 결과이다. ICP 소스파워와 RIE 척파워가 증가하면 AlGaAs와 InGaP모두 식각률이 증가하였지만, 공정압력의 증가는 식각률의 감소를 가져왔다. 그리고 OES peak세기는 공정압력과 ICP 소스파워의 변화에 따라서는 크게 변화하였지만 RIE 척파워에 따라서는 거의 영향을 받지 않았다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.60-73
• /
• 1997

By introducing a compressive-strained quanternary InGaAsP quantum-wells instead of a conventional ternary InGaAs quantum-wells in 1.55.mu.m DFB-LD, the lasing performances canb e improved and the problems caused by the thickness non-uniformity and the compositional abruptness among the hetero-interpaces canb e relaxed. In this paper, we investigated an iptimum InGaAsP/InGaAsP multiple-quantum-well(MQW) structure as an active layer in a direct-modulated 1.55.mu. DFB-LD from the view point of threshold current, chirping charcteristics, and resonance frequency. The optimum compressive-strained MQW structure was revealed as InGaAsP/InGaAsP structure with strain amount of about 1.2%, number of wells $N_{w}$ of 7, well width $L_{w}$ of 58.agns.. The threshold current density J of 500A/c $m^{2}$, the linewidth enhancement factor a of 1.8, and differential resonance frequency of d $f_{r}$/d(I-I)$^{1}$2/=2GHz/(mA)$^{1}$2/(atI=2 $I_{th}$) were expected in 1.55.mu.m .gamma./4-shifted DFB-LD with the cavity length of 400.mu.m long and kL value of 1.25. These values are considerably improved ones compared to those of 1.55um DFB-LD with InGaAs/InGaAsP MQW which have enhancement factor and the resonance frequence frequency by the detuning of lasing wavelength and gain-peak wavelength. It was found that the linewidth enhancement factor of 20% and differential resonance frequency of 35% without the degradation of the threshold current density could be enhanced in the range of -15nm~-20nm detuning which can be realized by controlling the thickness and Incomposition of InGaAsP well. well.and Incomposition of InGaAsP well. well.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.333-333
• /
• 2016

현재까지 가장 높은 광전류 변환 효율을 나타내는 III-V 화합물 반도체의 다중접합 태양전지 대신 이보다 단순한 에피구조를 가진 단일셀 이종접합구조의 태양전지를 제안하였다. 이를 한국나노 기술원에서 MOCVD(Metalorganic Vapour Phase Epitaxy) 장비를 이용하여 에피구조를 성장하고 태양 전지를 제작해 그 특성을 조사하였다. 태양 전지는 서로 다른 orientation의 두 GaAs 기판에 각각 동일한 에피 구조로 성장되었다. GaAs 기판은 Si 도핑된 n-type 기판으로 (100) 표면이 <111>A 방향으로 2도 off 된 웨이퍼와 10도 off 된 웨이퍼가 사용되었다. 연구에서 시뮬레이션에 사용된 태양전지의 에피 구조는 맨 위 p-GaAs (p-contact 층), p-InAlP, p-InGaP의 광흡수층과 N-InAlGaP 층과 아래의 n-InAlP와 n-GaAs의 n-contact층으로 이루어져있다.태양전지는 $5mm{\times}5mm$의 면적을 가지고 있다. 그림 1은 전류-전압의 측정된 결과를 나타낸 그래프이다. 태양전지는 1 sun 조건하에서 probe를 이용해 측정되었다. 2도 off GaAs 기판 위에 성장시킨 태양전지에서는 3.7mA의 단락전류값이, 10도$^{\circ}$ off 인 샘플에서는 4.7mA의 단락전류값이 측정되었다. 반면에 전류-전압곡선으로부터 얻은 10도 off 인 태양전지의 직렬 저항값은 2도 off 인 태양전지의 약4배 정도로 나타났다. 이는 기판의 결정방향에 따라 태양전지의 내부 전하 transport에 차이가 있음을 나타낸다. TLM (Transmission Line Model) 방법에 의한 p-contact의 ohmic저항 측정에서도 이와 일치하는 결과를 얻었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.68-72
• /
• 2008

AlGaInP high-brightness LEDs(HB-LEDs) have gained importance a variety of application operating in the red, orange, yellow and yellow-green wavelength. The light generated from inside LED chips should be emitted to the air through the surfaces of the chips. However, because of the differences between the semiconductor and air or epoxy's refractive index, some of the light was blocked so that caused lowering external quantum efficiency. In this study, nano-scale roughness on the top-GaP layer of AlGaInP epitaxial wafer was fabricated to improve' the brightness of AlGaInP LEDs. Nano-scale roughness was made by ICP dry etcher. Our AlGaInP LEDs with nano-scale roughness has higher brightness (about 28.5 %) than standard AlGaInP LEDs.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.12-17
• /
• 2021

The electronic and magnetic properties for Mn-adsorbed on the chalcopyrite (CH) AlGaP2 semiconductor are investigated by using first-principles FPLMTO method. The clean CH-AlGaP2 without adsorbed Mn is a p-type semiconductor with a direct band-gap. The Mn-adsorbed CH-AlGaP2 exhibits the ferromagnetic state. It is more energetically stable than the other magnetic ones. The interstitial site on P-terminated surface is more energetically favorable one than the Al/Ga-terminated surface, or the other adsorbing sites. In the case of Mn-adsorbed Al/Ga-terminated surface, it is induced a strong coupling between Mn-3d and neighboring P-3p electrons. The holes of partially unoccupied minority Mn-3d state and majority (or minority) Al-3p or P-3p state are induced. Thus a high magnetic moment of Mn is sustained by holes-mediated double-exchange coupling. It is noticeable that the semiconducting and half-metallic characteristics of CH-AlGaP2:Mn thin film is disappeared.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.205-208
• /
• 2018

In this work, we performed reverse- and forward-gate bias stress tests on normally-off AlGaN/GaN high electron mobility transistors(HEMTs) with p-AlGaN-gate for reliability assessment. Inverse piezoelectric effect, commonly observed in Schottky-gate AlGaN/GaN HEMTs during reverse bias stress, was not observed in p-AlGaN-gate AlGaN/GaN HEMTs. Forward gate bias stress tests revealed distinct degradation of p-AlGaN-gate devices exhibiting sudden increase of gate leakage current. We suggest that forward gate bias stress tests should be performed to define the failure criteria and assess the reliability of normally off p-AlGaN-gate GaN HEMTs.