• 한국전자파학회논문지
• /
• 제18권2호
• /
• pp.177-182
• /
• 2007

본 논문은 InGaP/GaAs HBT 공정을 통해 제작한 적응성궤환 잡음제거시스템용 낮은 위상잡음을 갖는 LC 차동 전압제어 발진기를 제안합니다. 전압제어 발진기는 필터링 기술을 포함한 향상된 공진 탱크 구조를 갖습니다. 비대칭 인덕터 대칭 캐패시터 구조로 제안된 전압제어 발진기의 출력 가변 범위는 207 MHz입니다. 출력 전력은 balun과 케이블 손실을 포함하여 -6.68 dBm입니다. 10 kHz, 100 kHz, 1 MHz에서의 위상잡음은 각각 -102.02, -112.04 그리고 -130.4 dBc/Hz입니다. 이 전압제어 발진기는 총 $0.9{\times}0.9mm^2$ 면적 내에 집적화되었습니다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.127-128
• /
• 2006

The proposed differential LC cross-coupled VCO is implemented in InGap/GaAs HBT process for an adaptive Global Positioning system(GPS) application. Two filtering capacitors are used at the base of output buffer amplifiers at the both sides of the core m order to improve phase noise characteristics. The VCO produced a phase noise of -133 dBc/Hz at 3MHz offset frequency from the carrier frequency of 1.489GHz and the second harmonic suppression is significantly suppresed up to -49dBc/Hz in simulation result. The three pairs of BC diodes are integrated m the tank circuit to increase the VCO Tunning range.

• 전자공학회논문지A
• /
• 제31A권9호
• /
• pp.104-113
• /
• 1994

We have fabricated n-p-n HBTs using 3-inchAlgaAs/GaAs hetero structure epi-wafers grown by MBE. DC and AC characteristics of HBT devices were measured and analyzed. For HBT epi-structure, Al composition of emitter was graded in the region between emitter cap and emitter. And base layer was designed with concentration of 1${\times}10^{19}/cm^{3}$ and thickness of 50nm, and Be was used as the p-type dopant. Principal processes for device fabrication consist of photolithography using i-line stepper, wet mesa etching, and lift-off of each ohmic metal. The PECVD SiN film was used as the inslator for the metal interconnection. HBT device with emitter size of 3${\times}10{\mu}m^{2}$ resulted in cut-off frequency of 35GHz, maximum oscillation frequency of 21GHz, and current gain of 60. The distribution of the ideality factor of collector and base current was very uniform, and the average values of off-set voltage and current was very uniform, and the average values of off-set voltage and current gain were 0.32V and 32 within a 3-inch wafer.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.156-161
• /
• 2004

The MMIC cascode VCO is designed, fabricated, and measured for Ku-band Low Noise Blcok(LNB) system using InGaP/GaAs HBT technology. The phase noise of -116.4 dBc/Hz at 1 MHz offset with output power of 1.3 dBm is obtained at 11.526 GHz by applying 3 V and 11 mA, which is comparatively better characteristics than compared with the different configuration VCOs fabricated with other technologies. The simulated results of oscillation frequency and second harmonic suppression agree with the measured results. The phase noise is improved due to the use of the smallest value of inductor in frequency determining network and the InGaP ledge function of the technology. The chip size of $830\time781\;{\mu}m^2$ is also achieved.

• 전자공학회논문지D
• /
• 제34D권3호
• /
• pp.52-59
• /
• 1997

Design and performance of principal four ICs for the 10-Gb/s optical communication system are presented. AlGaAs/GaAs HBTs are basic devices to implement a laser diode driver, apre-amplifier, and a limiting amplifier, and GaInP/GaAs HBTs are used for an AGC amplifier. We fbricated 11.5-GHz LD driver, a pre-amplifier, and a limiting amplifier, an dGaInP/GaAs HBTs are used for an AGC amplifier. We fabricated LD deriver, 10.5 GHz pre amplifier, 7.2 GHz AGC amplifier, and 10.3 GHz limiting amplifier, optimized circuit design and the stabilized MMIC fabrication process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1073-1076
• /
• 2003

This paper shows the performance as a photodetector of InP/InGaAs HPT operated with a base bias and forntside optical injection through the emitter. InP/InGaAs HPT produced the high optical gain of about 16.2 where HPT is biased at Vc=1V, I$_{B}$=20$\mu$A with an input optical power of 2.4$\mu$W. And we examined that the optical gain of HPTs becomes larger when operating in 3-terminal configuration rather than 2-terminal with the floating base. The optical performance of InP/InGaAs HPT is an attractive to the PIN Photodetector for use in long wavelength optical receivers.s.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.92-97
• /
• 2006

In this paper, a fully integrated Ku-band tripler differential MMIC voltage controlled oscillator(VCO), which consists of a differential VCO core and two triplers, is developed using high linearity InGaP/GaAs HBT technology. The VCO core generates an oscillation frequency of 3.583 GHz, an output power of 3.65 dBm, and a phase noise of -96.7 dBc/Hz at 100 kHz offset with a current consumption of 30 mA at a supply voltage of 2.9 V. The tripler shows excellent side band rejection of 23 dBc at 3 V and 12 mA. The tripler differential MMIC VCO produces an oscillation frequency of 10.75 GHz, an output power of -13 dBm and a phase noise of -89.35 dBc/Hz at 100 kHz offset.

• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.897-903
• /
• 2011

본 논문에서는 InGaP/GaAs hetero-junction bipolar transistor(HBT)를 이용하여 900 MHz에서 동작하는 1 W급 선형 전력 증폭기를 설계 및 검증하였다. 온도 변화에 따른 증폭기의 특성 변화를 최소화하기 위해 능동 바이어스 회로를 구성하였다. 전류 붕괴(current collapse)와 열 폭주(thermal runaway)를 방지하기 위하여 ballast 저항을 삽입하여 전력 증폭기의 성능 및 신뢰성을 최적화하였다. 제작된 선형 전력 증폭기는 중심 주파수 900 MHz의 one-tone 신호를 사용하였을 때, 17.6 dB의 전력 이득과 30 dBm의 OP1dB를 가지며, 이때 44.9 %의 PAE를 갖는다. 또한, two-tone 신호를 인가하였을 때, 20 dBm의 평균 출력 전력에서 47.3 dBm의 매우 높은 OIP3를 갖는다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.84-85
• /
• 2008

In this paper, differential cross coupled LC VCOs with two noise frequency filtering techniques are proposed. Both VCOs are based on symmetric capacitor with asymmetric inductor tank structure. The VCO using low pass filtering technique shows low phase noise of -130.40 dBc/Hz at 1 MHz offset when the center frequency is 1.619 GHz. And the other VCO using band pass filtering technique shows -127.93 dBc/Hz at 1 MHz offset frequency when center frequency is 1.604 GHz. Two noise frequency filtering techniques are approached with different target.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권11호
• /
• pp.546-550
• /
• 2002

In this paper, Heterojunction phototransistors(HPT's) with an optically transparent ITO emitter contacts were fabricated. The ITO ohmic contacts were realized by employing thin imdium layer between the ITO and $n^+$-InP layers. The ITO contact was annealed at $250^{\circ}C$. The specific contact resistance of about $6.6{\times}10^{-4}{\Omega}cm^2$ was measured by use of the transmission line model (TLM). Heterojunction bipolar transistors (HBTs) having the same device layout were fabricated to compare with HPTs. The DC characteristics of the InP/InGaAs HPT showed the similar electrical characteristics of the HBT. Emitter contact resistance($R_E$) of about $6.4{\Omega}$ was extracted, which was very similar to that of the HBT. The optical characteristics of HPT's were generated by illuminating the device with light from $1.3{\mu}m$ light. It showed that HPT's can be controlled optically.