• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.655-661
• /
• 2013

In this paper, the 1/f noise characteristics of n-channel MOSFET (NMOSFET) and p-channel MOSFET (PMOSFET) are analyzed in depth as a function of body bias. The normalized drain current noise, $S_{ID}/I_D{^2}$ showed strong dependence on the body bias in the sub-threshold region for both NMOSFET and PMOSFET, and NMOSFET showed stronger dependence than PMOSFET on the body bias. On the contrary, both of NMOSFET and PMOSFET do not exhibit the dependence of $S_{ID}/I_D{^2}$ on body bias in strong inversion region, although the noise mechanisms of two MOSFETs are different from each other.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.128-132
• /
• 2004

Short wave infrared (SWIR) photovoltaic devices have been fabricated from metal organic vapour phase epitaxy (MOVPE) grown n- on p- HgCdTe films on GaAs substrates. The MOVPE grown films were processed into mesa type discrete devices with wet chemical etching employed for meas delineation and ZnS surface passivatlon. ZnS was thermally evaporated from effusion cell in an ultra high vacuum (UHV) chamber. The main features of the ZnS deposited from effusion cell in UHV chamber are low fixed surface charge density, and small hysteresis. It was found that a negative flat band voltage with -0.6 V has been obtained for Metal Insulator Semiconductor (MIS) capacitor which was evaporated at $910^{\circ}C$ for 90 min. Current-Voltage (I-V) and temperature dependence of the I-V characteristics were measured in the temperature range 80 - 300 K. The Zero bias dynamic resistance-area product ($R_{0}A$) was about $7500{\Omega}-cm^{2}$ at room temperature. The physical mechanisms that dominate dark current properties in the HgCdTe photodiodes are examined by the dependence of the $R_{0}A$ product upon reciprocal temperature. From theoretical considerations and known current expressions for thermal and tunnelling process, the device is shown to be diffusion limited up to 180 K and g-r limited at temperature below this.

• Korean Journal of Pharmacognosy
• /
• v.51 no.3
• /
• pp.222-229
• /
• 2020

Recently, consume for functional cosmetics containing natural products has been greatly increased. In order to develop it as a natural cosmetic material, we selected Ixeridium dentatum (Thunb.) Tzvelev, Plantago asiatica L. and Rumex crispus L. that have antioxidant and anti-inflammatory effects. In this study, simultaneous quantitative analysis of the isolated compounds and natural product complexes (Mix.) were validated using high performance liquid chromatography (HPLC). The isolated six compounds were shown in a large linearity with a correlation coefficient (R²) of 0.99. The limit of detection (LOD) of chlorogenic acid, plantamajoside, acteoside, emodin chrysophanol and physcion were 0.36 ㎍/mL, 0.36 ㎍/mL, 0.37 ㎍/mL, 0.30 ㎍/mL, 0.22 ㎍/mL and 0.12 ㎍/mL, respectively. The limit of quantification (LOQ) of chlorogenic acid, plantamajoside, acteoside, emodin chrysophanol and physcion were 1.10 ㎍/mL, 1.08 ㎍/mL, 1.12 ㎍/mL, 0.99 ㎍/mL, 0.66 ㎍/mL and 0.35 ㎍/mL, respectively. Content analysis showed chlorogenic acid (0.19 ± 0.02%), plantamajoside (0.48 ± 0.01%), acteoside (0.65 ± 0.01%), emodin (1.15 ± 0.11%), chrysophanol (0.73 ± 0.01%) and physcion (0.69 ± 0.09%). Therefore, the results of this study may provide for basic data of standardization research natural cosmetic material development on the I. dentatum, P. asiatica and R. cripus.

• Journal of Life Science
• /
• v.16 no.5
• /
• pp.806-811
• /
• 2006

The regulation of labelling criterion for genetically modified (GM) foods has been enforced since 2001 in Korea. Therefore, GM soybean (GMS) or GM maize (GMM) processed foods must be labeled as GMO derived. We surveyed to see whether this regulation is kept relevantly or not and the distributive statue of GM processed foods. Using the method of polymerase chain reaction (PCR) based on endogenous gene (Le1n, SSIIb), promoter gene (P35S), terminator gene (NOS) and transgenic gene (RRS, Bt11, Bt176, GA21, T25, Mon810), we detected GMS and GMM processed foods circulating at the market in Busan area. Out of total 100 samples, 38 items were showed to be contaminated with recombinant gene by qualitative PCR. Among 82 domestic and 18 imported items, 32 (39.0%) and 6 (33.3%) items were detected with GM ingredients respectively. Also among the 80 soybean and 20 maize processed foods, 23 (28.7%) and 15 (75.0%) foods were sensitive to detect GMS and GMM ingredients respectively. For the qualitative PCR positive foods, we chased identity preservation (IP) certificates. And we verified that the PCR positive crops were grown up, harvested and shipped separately from GMO but just mixed with GMO in the threshold of the non attentional contamination levels (3%). Thus we can not find out any regulation-violent case at all. The results of this study will help to keep the regulations of GM labelling and be informative to consumers who want to know the laboratory results of GMO testing.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.260-260
• /
• 2011

투명 비정질 산화물반도체는 디스플레이의 구동소자인 박막 트랜지스터에 채널층으로 사용된다. 또한 투명하면서 유연성이 있는 소자를 저비용으로 제작할 수 있는 장점을 가진다. 투명 산화물반도체 재료 중 IGZO는 Si 또는 GaAs와 같은 공유결합성 반도체와는 다른 전자 배치로 전도대가 금속이온의 ns 궤도에서 형성되며, 가전도대가 산소 음이온의 2p 궤도에서 형성된다. 특히 큰 반경의 금속 양이온은 인접한 양이온과 궤도 겹침이 크게 발생하게 되며 캐리어의 효과적인 이동 경로를 제공해줌으로써 다른 비정질 반도체와는 다르게 높은 전하이동도(~10 $cm^2$/Vs)를 가진다. 따라서 저온공정에서 우수한 성능의 TFT소자를 제작할 수 있는 장점이 있다. 본 연구에서는 TFT 채널층으로 사용하기 위한 a-IGZO박막의 산소분압에 따른 특성변화를 분석 하였다. a-IGZO박막은 Pulsed Laser Deposition (PLD)를 이용하여 산소분압(20~200 mTorr) 변화에 따라 Glass기판에 증착하였다. 증착된 a-IGZO 박막의 구조적 특성으로는 X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), 광학적 특성은 UV-vis spectroscopy 분석을 통해서 알아보았다. TFT 채널층의 조건으로는 낮은 off-current, 높은 on-off ratio를 위해 고저항 ($10^3\;{\Omega}cm$)의 진성반도체 성질과 source/drain금속과의 낮은 접촉저항(ohmic contact) 등의 전기적 성질이 필요하다. 따라서 이러한 전기적 특성확인을 위해 transmission line method (TLM)을 사용하여 접촉저항과 비저항을 측정하였고, 채널층으로 적합한 분압조건을 확인해볼 수 있었다.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.388-395
• /
• 1997

Maintaining the original canal path during instrumentation is a challenge in narrow curved canals. This study compared the maintenance of the original canal path of curved root canals during instrumentation with two kinds of stainless steel K-files(Brassler USA & Mani Japan), K-flexofiles(Maillefer Swiss) and Ni-Ti files(Brassler USA, Savannah, GA) using circumferential filing technique to # 40 MAF on 60 extracted human molars. Buccal and mesial canals with minimal initial curvature of 20 degrees were used. The maximal initial curvature was 41.5 degrees. Sixty curved canals divided into four groups according to file type(Group 1 : Ni-Ti file, Group 2 : K-flexofile, Group 3: K-file(Brassler), Group 4 : K-file(Mani)). Radiographs of canals were obtained before and after canal shaping. And postoperative radiographs were compared with preoperative radiographs using superimposition method. Data analysis was performed using Covariance analysis and paired-comparison test. The results observed were as follow ; 1. The angle of curvature was better maintained with Ni-Ti file than with stainless steel files. (p<0.01) 2. There was no significant difference in maintaining canal curvature between K-flexofile, Brassler$^{(R)}$ K-file and Mani$^{(R)}$ K-file, although there was some differences in mean values of postoperative canal curvature. 3. Paired-comparison t test revealed significant differences within each of the three stainless steel file types when comparing the mean differences before and after instrumentation, but no significant differences were observed within Ni-Ti file group.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.855-862
• /
• 2013

Although antioxidant activities of Korean traditional fermented foods were reported by many researchers, study on antioxidant activity of microorganism originated from Korean traditional fermented foods was little. Therefore, we improved condition for antioxidant production by a bacterium isolated from home-made Chungkookjang. We selected a bacterial strain, which showed the highest antioxidative activity, from Chungkookjang and then named GJ. The selected GJ strain was identified as Bacillus methylotrophicus by alignment data of 16S rRNA gene nucleotide sequences. Improved medium compositions for DPPH radical scavenging activity were 0.25% sucrose, 1% peptone, 0.01% $MgSO_4{\cdot}7H_2O$ and initial pH 6.5, respectively. Optimal culture conditions were $30^{\circ}C$, 200 rpm and 4% inoculum volume, respectively. In improved conditions, DPPH radical scavenging activity of GJ reached to 91% in a short time. The strain GJ also possessed ACE inhibition and other antioxidative activities; ACE inhibition activity (49.4%), ABTS radical scavenging activity (99.8%), metal chelating activity (67.9%), SOD-like activity (36.5%) and reducing power ($A_{700}$ = 5.982) were observed, respectively. Therefore, our results suggest that B. methylotrophicus GJ strain may be potential candidate for functional foods, cosmetic products for anti-aging and medicine for diseases caused by oxidative stress.

• Annals of dermatology
• /
• v.30 no.6
• /
• pp.645-652
• /
• 2018

Background: Adiponectin, an adipokine secreted from adipocytes, affects energy metabolism and also shows anti-diabetic and anti-inflammatory properties. Recent studies have reported that adiponectin plays a role in regulating skin inflammation. Objective: This study aimed to investigate the effect of adiponectin on the expression of filaggrin (FLG) in normal human epidermal keratinocytes (NHEKs). Methods: NHEKs were serum-starved for 6h before being treated with adiponectin. Afterward, cell viability was assessed by MTT assay. We also treated with calcium, interleukin (IL)-4, and IL-13 to provide positive and negative comparative controls, respectively. Gene mRNA expression was quantified using real time reverse transcription polymerase chain reaction, and protein expression was evaluated using Western blot. To evaluate the relationship among mitogen-activated protein kinases (MAPKs), activator protein 1 (AP-1), and FLG, we also treated cells with inhibitors for MAPKs JNK, p38, and ERK1/2. Results: FLG and FLG-2 mRNA expression in NHEKs significantly increased after treatment with $10{\mu}g/ml$ adiponectin. Adiponectin also restored FLG and FLG-2 mRNA expression that was otherwise inhibited by treatment with IL-4 and IL-13. Adiponectin induced FLG expression via AP-1 and MAPK signaling. Conclusion: Adiponectin positively regulated the expression of FLG and could be useful as a therapeutic agent to control diseases related to disrupted skin barrier function.

• The korean journal of orthodontics
• /
• v.51 no.5
• /
• pp.313-320
• /
• 2021

Objective: The purpose of this study was to evaluate the effects of chewing gum and low-level laser therapy in alleviating orthodontic pain induced by the initial archwire. Methods: Patients with 3-6 mm maxillary crowding who planned to receive non-extraction orthodontic treatment were recruited for the study. Sixty-three participants (33 females and 30 males) were randomly allocated into three groups: laser, chewing gum, and control. In the laser group, a gallium aluminum arsenide (GaAlAs) diode laser with a wavelength of 820 nm was used to apply a single dose immediately after orthodontic treatment began. In the chewing gum group, sugar-free gum was chewed three times for 20 minutes-immediately after starting treatment, and at the twenty-fourth and forty-eighth hours of treatment. Pain perception was measured using a visual analog scale at the second, sixth, and twenty-fourth hours, and on the second, third, and seventh days. Results: There were no statistically significant differences between the groups at any measured time point (p > 0.05). The highest pain scores were detected at the twenty-fourth hour of treatment in all groups. Conclusions: Within the limitations of the study, we could not detect whether low-level laser therapy and chewing gum had any clinically significant effect on orthodontic pain. Different results may be obtained with a higher number of participants or using lasers with different wavelengths and specifications. Although the study had a sufficient number of participants according to statistical analysis, higher number of participants could have provided more definitive outcomes.

• Clinical and Experimental Pediatrics
• /
• v.62 no.1
• /
• pp.36-41
• /
• 2019

Purpose: In this study, we investigated the clinical features and prognostic factors of early-onset sepsis (EOS) in neonatal intensive care unit (NICU) patients. Methods: A retrospective analysis was conducted on medical records from January 2010 to June 2017 (7.5 years) of a university hospital NICU. Results: There were 45 cases of EOS (1.2%) in 3,862 infants. The most common pathogen responsible for EOS was group B Streptococcus (GBS), implicated in 10 cases (22.2%), followed by Escherichia coli, implicated in 9 cases (20%). The frequency of gram-positive sepsis was higher in term than in preterm infants, whereas the rate of gram-negative infection was higher in preterm than in term infants (P<0.05). The overall mortality was 37.8% (17 of 45), and 47% of deaths occurred within the first 3 days of infection. There were significant differences in terms of gestational age (26.8 weeks vs. 35.1 weeks) and birth weight (957 g vs. 2,520 g) between the death and survival groups. After adjustments based on the difference in gestational age and birth weight between the 2 groups, gram-negative pathogens (odds ratio [OR], 42; 95% confidence interval [CI], 1.4-1,281.8) and some clinical findings, such as neutropenia (OR, 46; 95% CI, 1.3-1,628.7) and decreased activity (OR, 34; 95% CI, 1.8-633.4), were found to be associated with fatality. Conclusion: The common pathogens found to be responsible for EOS in NICU patients are GBS and E. coli. Gram-negative bacterial infections, decreased activity in the early phase of infection, and neutropenia were associated with poor outcomes.