• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.247-247
• /
• 2009

In this work, Ga-doped ZnO (GZO) thin films for toxic gas sensor application were deposited on low temperature co-fired ceramic (LTCC) substrates, by RF magnetron sputtering method. LTCC is one of promising materials for integration with heater, low cost production and high manufacturing yields than silicon substrate. The LTCC substrates with thickness of $400\;{\mu}m$ were fabricated by laminating 12 greentapes which consist of alumina and glass particle in an organic binder. The GZO thin films deposited on the substrates and were analyzed by X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM). The films are well crystallized in the hexagonal (wurzite) structure with increasing thickness. The fabricated sensors showed good sensitivity and fast response time to common types of toxic gases (NOx, COx).

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.215-218
• /
• 2011

A novel design of gas sensor using Ga-doped ZnO (GZO) thin films which are deposited on low temperature co-fired ceramic (LTCC) substrates is presented. The LTCC substrates with thickness of 400 ${\mu}m$ are fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The GZO thin films with different thickness are deposited on LTCC substrates, by RF magnetron sputtering method. The microstructure and sensing properties of GZO gas sensing films are analyzed as a function of the film thickness. The films are well crystallized in the hexagonal (wurzite) structure with increasing thickness. The maximum sensitivity of 3.49 is obtained at 100 nm film thickness and the fastest 90% response time of 27.2 sec is obtained at 50 nm film thickness for the operating temperature of $400^{\circ}C$ to the $NO_2$ gas.

• 한국진공학회지
• /
• 제16권5호
• /
• pp.359-365
• /
• 2007

본 논문에서는 zinc oxide (ZnO)와 gallium이 도핑 된 zinc oxide (GZO)를 이용하여 radio frequency (RF) magnetron sputtering 방법에 의해 상온에서 제작된 bottom-gate 박막 트랜지스터의 특성을 평가하고 분석하였다. 게이트 절연층 물질로서 새로운 물질을 사용하지 않고 열적 성장된 $SiO_2$를 사용하여 게이트 누설 전류를 수 pA 수준까지 줄일 수 있었다. ZnO와 GZO 박막의 표면 제곱평균제곱근은 각각 1.07 nm, 1.65 nm로 측정되었다. 그리고 ZnO 박막은 80% 이상, GZO 박막은 75% 이상의 투과도를 가지고 있었고, 박막의 두께에 따라 투과도가 달라졌다. 또한 두 시료 모두 (002) 방위로 잘 정렬된 wurtzite 구조를 가지고 있었다. 제작된 ZnO 박막 트랜지스터는 2.5 V의 문턱 전압, $0.027\;cm^2/(V{\cdot}s)$의 전계효과 이동도, 104의 on/off ratio, 1.7 V/decade의 gate voltage swing 값들을 가지고 있었고, enhancement 모드 특성을 가지고 있었다. 반면에 GZO 박막 트랜지스터의 경우에는 -3.4 V의 문턱 전압, $0.023\;cm^2/(V{\cdot}s)$의 전계효과 이동도, $2{\times}10^4$의 on/off ratio, 3.3 V/decade의 gate voltage swing 값들을 가지고 있었고, depletion 모드 특성을 가지고 있었다. 우리는 기존의 ZnO와 1wt%의 Ga이 도핑된 ZnO를 이용하여 두 가지 모드의 트랜지스터 특성을 보이는 박막 트랜지스터를 성공적으로 제작하고 분석하였다.

• 한국정보통신학회논문지
• /
• 제19권6호
• /
• pp.1393-1398
• /
• 2015

본 연구에서는 고주파 마그네트론 스퍼터링 법으로 PES 기판 위에 공정압력을 5 에서 20 mTorr 로 변화시켜 가며 GZO (Ga-doped ZnO) 박막을 제작하여, 전기적 및 광학적 특성을 조사하였다. XRD 측정을 통해 공정압력에 무관하게 모든 GZO 박막이 c 축으로 우선 성장함을 확인할 수 있었고, 5 mTorr 에서 제작한 GZO 박막이 반가폭 0.44° 로 가장우수한 결정성을 나타내었다. AFM 관찰 결과, 표면 거칠기 값은 공정압력 5 mTorr 제작한 박막에서 가장 낮은 값인 0.20 nm 를 나타내었다. 공정압력 5 mTorr 에서 증착한 GZO 박막의 재료평가지수는 6652 로 가장 우수한 값을 나타내었고 이때 비저항과 가시광 영역에서의 평균 투과도는 각각 6.93×10^-4Ω·cm 과 81.4 % 이었다. 공정압력이 증가함에 따라 캐리어 농도가 감소하고 이로 인해 에너지 밴드갭이 좁아지는 Burstein-Moss 효과도 관찰할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.336.2-336.2
• /
• 2014

Indium Tin Oxide (ITO) thin films are used as the Transparent Conducting Oxide (TCO), such as flat panel display, transparent electrodes, solar cell, touch screen, and various optical devices. ZnO has attracted attention as alternative materials to ITO film due to its resource availability, low cost, and good transmittance at the visible region. Recently, very thin film deposition is important. In order to minimize the damage caused by bending. However, ZnO thin film such as Ga-doped ZnO(GZO) has poor sheet resistance characteristics. To solve this problem, By adding the conductive metal on films can decrease the sheet resistance and increase the mobility of the films. In this study, We analyzed the electrical and optical characteristics of GZO/Ag/GZO (GAG) films by change in Ag and GZO thickness.

• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.1-5
• /
• 2016

The ultimate aims of display market is transparent or flexible. Researches have been carried out for various applications. It has been possible to reduced the process steps and get good electrical properties for semiconductors with large optical bandgaps. Oxide semiconductors have been established as one of the leading and promising technology for next generation display panels. In this paper, alternative treatment processes have been tried for oxide semiconductors of thin film transistors to increase the electrical properties of the thin film transistors and to investigate the mechanisms. There exist a various oxide semiconductors. Here, we focused on InGaZnO, ZnO and InSnZnO which are commercialized or researched actively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 제21회 학술발표회 초록집
• /
• pp.67-67
• /
• 2001

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.11-11
• /
• 2008

ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.34-35
• /
• 2006

Transparent ZnO thin film transistor (TFT) is fabricated on the glass substrates. The device consists of a high mobility intrinsic ZnO as a semiconductor active channel, Ga doped ZnO (GZO) as an electrode, $HfO_2$ as a gate insulator. GZO and $HfO_2$ layers are prepared by using a pulsed laser deposition and intrinsic ZnO layers are fabricated by using an rf-magnetron sputtering, respectively. The transparent TFT is highly transparent (> 87 %) and exhibits n-channel, enhancement mode behavior with a field-effect mobility as large as $11.7\;cm^2/Vs$ and a drain current on-to-off ratio of about $10^5$.

• 한국재료학회지
• /
• 제27권2호
• /
• pp.69-75
• /
• 2017

To establish low-temperature process conditions, process-property correlation has been investigated for Ga-doped ZnO (GZO) thin films deposited by pulsed DC magnetron sputtering. Thickness of GZO films and deposition temperature were varied from 50 to 500 nm and from room temperature to $250^{\circ}C$, respectively. Electrical properties of the GZO films initially improved with increase of temperature to $150^{\circ}C$, but deteriorated subsequently with further increase of the temperature. At lower temperatures, the electrical properties improved with increasing thickness; however, at higher temperatures, increasing thickness resulted in deteriorated electrical properties. Such changes in electrical properties were correlated to the microstructural evolution, which is dependent on the deposition temperature and the film thickness. While the GZO films had c-axis preferred orientation due to preferred nucleation, structural disordering with increasing deposition temperature and film thickness promoted grain growth with a-axis orientation. Consequently, it was possible to obtain a good electrical property at relatively low deposition temperature with small thickness.