• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.235-240
• /
• 2003

The development of large area GaN substrates is one of important issues in expanding of GaN-based applications. In order to investigate the possibility, GaN thick films were grown by a sublimation technique, using MOCVD-GaN films grown on a sapphire as a seed-crystal substrate and a commercial GaN powder as a source material. The pressure in chamber under the fixed flow rate of $N_2$ gas and $NH_3$ gas was kept at 1 atmosphere and the effects of the various processing parameters such as the distance between source material and seed crystal, the temperature of top- and bottom heater and the growth time during the growth of GaN thick film were investigated. The growth feature and microstructure of the GaN thick films were observed by SEM and XRD. The optical bandgap properties and the defects were evaluated by the PL measurement. By these results, the growth conditions such as the distance between the GaN source and the seed substrate, the growth temperature and the growth time were determined for the satisfied growth of GaN thick films.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.151-162
• /
• 2004

MnSb layers were grown on GaAs(100), (111)A and (111)B substrates by hot wall epitaxy under various growth conditions. Growth condition dependence of structural properties of the layers was examined. The growth direction and structural properties of MnSb/GaAs(100) depend on Sb source and substrate temperatures. The smooth MnSb(10.1)/GaAs(100) interface was obtained under the appropriate growth condition. On the other hand, MnSb(00.1) layers were grown on GaAs(111) substrates. The quality of the layers on (111)B was superior to that on GaAs(111)A, but degraded as in increasing Sb source temperature during the growth. The $Mn_2Sb$ domain was generated in the layers grown under conditions of low Sb source temperature and high substrate temperature on GaAs(111) substrates.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.250-261
• /
• 2007

We present the morphological evolution at different source powers in the ion-enhanced etching of GaAs(100) in $BCl_3-Cl_2$ plasma. With little ion bombardment at floating potential, the surface develops <110> ridges and {111} facets, as it does in purely chemical etching. Higher source power (900 W) produces well developed crystallographic surfaces while lower source power (100 W) produces poorly developed crystallographic surfaces. This is attributed to the availability of excited reactive species (chlorine atoms) depending on source powers. With more concentration of the reactive species at higher source powers, the surface of GaAs(100) would be a surface that is expected from thermodynamics while the surface morphology would be determined by sputtering in the lack of reactive species. Statistical analysis of the surfaces, based on scaling theory, revealed two spatial exponents: one (smaller than one) is formed by atomic scale mechanisms, the other (larger than one) is formed by larger scale mechanisms which is believed to develop facets. When samples are biased, the surfaces experienced bombardment resulting in suppression of ridge formation at high source power and islands formation at low source power.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.310-310
• /
• 2013

본 연구에서는 Titanium (Ti) source/drain 전극 접합이 차세대 비정질 InGaZnO (IGZO) 기반 박막형 트랜지스터에 미치는 영향을 화학적, 구조적, 전기적 특성 분석을 통하여 관찰하고 Ti/IGZO 접합 특성을 설명할 수 있는 메커니즘을 제시하였다. IGZO 기반 박막형 트랜지스터 소자의 구동 특성은 transmission line method (TLM) 패턴 공정을 이용하여 정량적으로 분석되었다. 비정질 IGZO 기반의 박막형 트랜지스터에서 Ti source/drain 전극 접합에 의한 구동 특성 변화 및 영향을 확인하기 위하여 금속/산화물 계면 반응성이 낮은 silver (Ag) source/drain 전극이 reference로 비교되었으며, 그 결과 Ti source/drain 전극 접합이 적용된 비정질 IGZO 트랜지스터의 경우 Ti 금속과 IGZO 산화물 계면에 형성되는 열역학적으로 안정한 $TiO_x$ 층의 형성에 의해 VT ($-{\Delta}0.52V$) shift 및 saturation mobility ($8.48cm^2$/Vs) 상승됨을 확인하였다. 뿐만 아니라 TLM 패턴을 이용한 IGZO 트랜지스터의 전기적 변수 도출 및 수치적 해석으로부터 $TiO_x$ 계면층 형성이 Ti 금속과 비정질 InGaZnO 계면에서의 effective contact resistivity를 효과적으로 낮출 수 있음을 확인하였다. Ti source/drain 전극 접합에 의해 발생되는 $TiO_x$ 계면층의 화학적, 구조적 특성과 $TiO_x$ 계면층 생성에 의한 소자 특성 변화를 연관시켜 해석함으로써, IGZO 기반 박막형 트랜지스터에서의 Ti source/drain 전극 접합이 비정질 IGZO 기반 박막형 트랜지스터에 미치는 영향을 설명하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.6-10
• /
• 2009

In this paper, a selective area growth (SAG) of a GaN/AlGaN double heterostructure (DH) has been performed on r-plane sapphire substrate by using the mixed-source hydride vapor phase epitaxy (HVPE) with multi-sliding boat system. The SAG-GaN/AlGaN DH consists of GaN buffer layer, Te-doped AlGaN n-cladding layer, GaN active layer, Mg-doped AlGaN p-cladding layer, and Mg-doped GaN p-capping layer. The electroluminescence (EL) characteristics show an emission peak of wavelength, 439 nm with a full width at half maximum (FWHM) of approximately 0.64 eV at 20 mA. The I-V measurements show that the turn-on voltage of the SAG-GaN/AlGaN DH is 3.4 V at room temperature. We found that the mixed-source HVPE method with a multi-sliding boat system was one of promising growth methods for III-Nitride LEDs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.693-694
• /
• 2010

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.24-27
• /
• 2003

In this paper, We make experiment on two methode for GaAs MESFET with temperature variation. One method, we mesure gate leakage current at open source electrode. another we mesure gate leakage current at short source electrode. The difference of two current has been tested and provide that the existence of another source to Schottky barrier height against the image force lowering effect.

• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.15-22
• /
• 2007

We present the morphological evolution at different source powers in the ion-enhanced etching of GaAs(100) in $BCl_3-Cl_2$ plasma. With little ion bombardment at floating potential, the surface develops <110< ridges and {111} facets, as it does in purely chemical etching. The morphology develops in less than 1 minute and grows bigger over time. The etched surfaces show different morphologies at different source powers with constant pressures of gases. Lowe. source power (100 W) produces poorly developed crystallographic surfaces while higher source power (900 W) produces well developed crystallographic surfaces. This is attributed to the availability of excited reactive species(chlorine atoms) depending on source powers. With more concentration of the reactive species at higher source powers, the surface of GaAs(100) would be a surface that is expected from thermodynamics while the surface morphology would be determined by sputtering in the lack of reactive species. Statistical analysis of the surfaces, based on scaling theory, revealed two spatial exponents: one(smaller than one) is formed by atomic scale mechanisms, the other(larger than one) is formed by larger scale mechanisms which is believed to develop facets.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.145-149
• /
• 2016

The effect of process parameters such as plasma composition, ICP (Inductively Coupled Plasma) source power and rf chuck power on the etch characteristics of GaN epitaxy layer was studied. $Cl_2/Ar$ ICP discharges showed higher etch rates than $SF_6/Ar$ discharges because of the higher volatility of $GaCl_x$ etch products than $GaF_x$ compounds. As the Ar ratio increases in the $Cl_2/Ar$ ICP discharges, the etch anisotropy was enhanced due to the improved physical component of the etching. For both plasma chemistries, the GaN etch rate increased continuously as both the ICP source power and rf chuck power increased, and a maximum etch rate of 251.9 nm/min was obtained at $13Cl_2/2Ar$, 750W ICP power, 400W rf chuck power and 10 mTorr condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.