• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.129-133
• /
• 2019

In this paper, we developed a system to monitor the storage capacity of suction-type device such as vacuum cleaner or crop harvesters. The monitoring system consists of load cells and a differential pressure sensor which simultaneously monitor the weight and volume of the stock. Since weighing objects stored in storage containers alone cannot fully monitor the level of filling, more accurate monitoring can be achieved by monitoring volume and fusion with weight information. The volume was monitored using a phenomenon in which the flow rate of the inhaled air varies depending on the volume of the object filled in the storage container. In this paper, we developed a system to monitor the storage in three stages: low, medium and high.

• 폴리머
• /
• 제33권6호
• /
• pp.561-568
• /
• 2009

소형 플라스틱 부품들은 대부분 다수 캐비티 빼기 사출금형에서 성형된다. 이러한 다수 빼기 캐비티 금형에서의 사출성형은 캐비티간의 흐름 균형이 중요하다. 캐비티간 흐름의 불균형은 성형품의 캐비티간 물성 및 품질의 편차를 초래한다. 캐비티간의 흐름균형은 런너와 게이트에서의 흐름균형을 통하여 이루어지게 되는데 런너와 게이트에서 기하학적인 균형을 이루어도 열적 불균형으로 캐비티간 흐름의 불균형을 초래한다. 본 연구에서는 캐비티간 흐름의 균형을 위해 고안한 스크류 타입의 런너을 이용하여 캐비티간 충전균형을 고찰하였다. 여러 형태의 스크류 런너에서 결정성 수지와 비결정성 수지, 그리고 점도가 높은 수지와 점도가 낮은 수지를 이용하여 캐비티간 흐름을 관찰하였다. 흐름의 균형은 성형조건 중 사출속도에 따라 다르게 나타나기 때문에 사출속도를 변화해 가며 관찰하였다. 실험 결과를 성형해석과 비교 검토하였으며 서로 잘 일치함을 확인할 수 있었다. 스크류 런너에서 수지가 흐르면서 스크류 채널을 따라 회전운동을 하여 스크류 단면에서 온도가 균일하게 됨을 확인하였다. 그리구 이러한 균일한 온도 때문에 캐비티간 흐름 균형이 이루어지고 있음을 확인하였다. 결론적으로 실험에 사용된 새롭게 고안된 스크류 타입의 런너는 캐비티간 충전균형을 이루는데 매우 효과적임을 실험과 해석을 통해 검증할 수 있었다.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1627-1633
• /
• 2011

사출금형은 일반적으로 다수개의 부품을 조립하여 제작되며, 특히 성형부(Core/Cavity)가 금형 형판 내부에 조립되는 구조를 갖는다. 이러한 구조로 인해 금형 조립부 경계면에서는 열접촉 저항이 발생하여 금형 내부의 열전달 특성에 영향을 미치게 된다. 최근 금형의 열접촉 저항이 성형부의 온도분포에 미치는 영향을 수치적으로 예측하기 위한 선행연구가 수행되었으며, 본 연구에서는 이에 기반하여 열-유동 연계해석을 적용함으로써 금형 내부의 열접촉 저항이 사출성형시 유동특성에 미치는 영향을 분석 하였다. 상기 해석결과와 실험결과와의 비교분석을 통해 금형의 열접촉 저항을 고려한 열-유동 연계해석이 기존의 해석방법과 비교할 때 사출성형 유동특성을 보다 향상된 신뢰성으로 예측할 수 있음을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.47-53
• /
• 2010

본 연구에서는 솔더 페이스트를 이용한 프린팅 공정의 해석에 대해 연구를 수행하였다. 스텐실 프린팅 공정의 설계에서 중요한 인자는 프린팅 조건, 스텐실 설계, 그리고 솔더 페이스트의 물성 등이다. 본 연구에서는 이 인자들 중에서, 솔더 페이스트의 점도와 표면장력, 그리고 솔더 페이스트와 스텐실 사이의 접촉각이 프린팅 공정의 성능에 미치는 영향을 해석을 통해 파악하였다. 실제 해석에 앞서 압력에 의해서 솔더 페이스트가 스텐실에 채워지는 단순화된 형상과 조건으로 해석을 수행하였다. 해석은 마이크로 유동의 해석에 많이 이용이 되고 있는 상용 소프트웨어인 콤솔(COMSOL)을 이용하였고 축대칭으로 해석하였다. 해석 결과, 솔더 페이스트의 점도는 충진률에 큰 영향을 줌을 알 수 있었고 표면장력과 접촉각은 충진되는 형상에 영향을 줌을 알 수 있었다.

• 설비공학논문집
• /
• 제25권6호
• /
• pp.331-337
• /
• 2013

An experimental study on the performance of a liquid electric component cooling system was performed. The thermal resistance and pressure drop at a heat sink were measured, for aluminum waterblocks with four different internal shapes, with either smooth surface, porous media filling, or with fins of 5 mm height, or of 7 mm height. The fins had 0.5 mm thickness, and the gap between the fins was 0.5 mm. The waterblock internal dimension was $36.5{\times}36.5{\times}7mm$. Compared with the waterblock with smooth surface, the thermal resistance reduction was 11%, 46%, and 42% for waterblocks with porous media filling, 5 mm, and 7 mm fins, respectively. A new dimensionless parameter was suggested to evaluate the waterblock performance, with the simultaneous consideration of thermal resistance and pressure drop. The performance of the waterblock with fins of 5 mm height was best by parameter.

• 복식문화연구
• /
• 제18권3호
• /
• pp.423-435
• /
• 2010

The purpose of this study was to observe the current consumption of bedding products, purchase behavior, and to compare between purchase criteria and degree of satisfaction after the purchase. Independent variables are age, consumer's knowledge and involvement about the bedding materials. This study can contribute for bedding product marketing strategies and design development. We used questionnaires that were distributed to 500 females aged in 20s to 50s, using stratified sampling method. Only 457 reliable questionnaires were selected for statistical analysis. Data were analyzed statistically through frequencies, paired t-test, ANOVA, Dunnett T3, Chi-test, using SPSS (Version 12.0). The results of this study are as follows. The types of bedroom was significantly associated with age variables. Women in 20's to 30's were using the mixture of Ondol and bed(chimdaie), while 40's to 50's women were using bed for all their rooms. The usage of filling material for the comforter(ibul) was significantly associated with the age group. 20's to 30's age group preferred synthetic fibers for the filling, while 40 to 50's women preferred cotton fibers. Generally, the most of people used quilted comforter and they used cotton material as filling materials of comforters. As to purchase behavior, the most frequent place of purchase was specialty store of bedding products, and the highest percentage of motivation for purchase was "deformation after the use/throwing away". Purchase motivation for bedding was related with the age variable and the clusters based on the knowledge of bedding materials. We analysed the comparison test purchase criteria and satisfaction. In all attributes except brand image, people evaluated lower in satisfaction after purchase than in criteria before purchase.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.230-236
• /
• 2014

Wafer level package technology is added to the surface of wafer circuit packages to create a semiconductor technology that can minimize the size of the package. However, in conventional packaging, warpage and fracture are major concerns for semiconductor manufacturing. We optimized the wafer dam design using a finite element method according to the dam height and heat distribution thermal properties. The dam design influences the uniform deposition of the image sensor and prevents the filling material from overflowing. In this study, finite element analysis was employed to determine the key factors that may affect the reliability performance of the dam package. Three-dimensional finite element models were constructed using the simulation software ANSYS to perform the dam thermo-mechanical simulation and analysis.

• 한국분말재료학회지
• /
• 제16권6호
• /
• pp.431-437
• /
• 2009

Various inorganic fillers improve the thermal conductivity and physical properties of organic products. Alumina has been used a representative filler in the heat radiation sheet for the heat radiation of electric device. The high filling rate of alumina increases the thermal conductivity and properties of products. We successfully developed the spherical alumina by flame fusion process using the oxygen burner with LPG fuel. In the high temperature flame (2500$\sim$3000$^{\circ}C$) of oxygen burner, sprayed powders were melting and then rotated by carrier gas. This surface melting and rotation process made spherical alumina. Especially effects of chemical composition and particle size of stating materials on the melting behavior of starting materials in the flame and spheroidization ratio were investigated. As a result, spheroidization ratio of boehmite and aluminum hydroxide with endothermic reaction of dehydration process was lower than that of the sintered alumina without dehydration reaction.

• 한국식생활문화학회지
• /
• 제11권1호
• /
• pp.43-52
• /
• 1996

[Goshogi] which is held from 9th to 16th January, every year is the Buddhist service of praying for the soul of Shinran's $(l173{\sim}1262)$ after death. It is the most majestic high-filling style and also unparalled in the annals of Japanese history in sacrificial offering. Shinran was horned in the Fujiwara's family. And not only he believed Prince Shodoku's belife but also retired to the mountain to enter the priesthood by it. Prince Shodoku built Horyu temple which is the typical temple of Nara ages. Buddism was transmitted from Korean peninsula, three countries of Silla, Bekje and Kokuryo effected on many field of Japnese culture during that ages. At the same time, Kasugadaisha and Danjanjinja of Shinto religion was built by Fujiwara Family. Both of them was Buddhist temple before. Throughout like these historical background, the facts what the religious services and the sacrificial offerings for Prince Shodoku, Wakamiyasai of Kasugas' and Kakitsusai of Danjanjinja must be influenced from Korean Peningula. So the dietary culture of the religious rites and traditional customs between two countries could be thought the relation with a narrow stream strait. But among them, in the size, color and shape, the cooking method and technique in the usage of rice powder and sugar, it is tops in value. The noteworthy points of the thought were as follows: 1. high-filling style of the sacrificial offerings what is mixed and harmonized with Buddhism, Confucious, Sharmanism, Toaism and Korean traditioal customs. 2. eating together of god and human. 3. the fusion of gods and Buddha.

• Journal of Korean Neurosurgical Society
• /
• 제49권1호
• /
• pp.75-78
• /
• 2011

We report a case of pedicle screw loosening treated by modified transpedicular screw augmentation technique using polymethylmethacrylate(PMMA), which used the anchoring effect of hardened PMMA. A 56-year-old man who had an L3/4/5 fusion operation 3 years ago complained of continuous low back pain after this operation. The computerized tomography showed a radiolucent halo around the pedicle screw at L5. We augmented the L5 pedicle screw with modified pedicle screw augmentation technique using PMMA and performed an L3/4/5 pedicle screw fixation without hook or operation field extension. This modified technique is a kind of transpedicular stiffness augmentation using PMMA for the dead space around the loosed screw. After filling the dead space with 1-2 cc of PMMA, we inserted a small screw. Once the PMMA hardened, we removed the small screw and inserted a thicker screw along the existing screw threading to improve the pedicle screws' pullout strength. At 10 months' follow-up, x-ray showed strong fusion of L3/4/5. The visual analogue scale (VAS) of his back pain was improved from 9 to 5. This modified transpedicular screw augmentation with PMMA using anchoring effect is a Simple and effective surgical technique for pedicle screw loosening. However, clinical analyses of long-term follow-up and biomechanical studies are needed.