• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1656-1663
• /
• 2016

A capacitive wireless power transfer (C-WPT) system uses an electric field to transmit power through a physical isolation barrier which forms a pair of ac link capacitors between the metal plates. However, the physical dimension and low dielectric constant of the interface medium severely limit the effective link capacitance to a level comparable to the main switch output capacitance of the transmitting circuit, which thus narrows the soft-switching range in the light load condition. Moreover, by fundamental limit analysis, it can be proved that such a low link capacitance increases operating frequency and capacitor voltage stress in the full load condition. In order to handle these problems, this paper investigates optimal design of double matching transformer networks for C-WPT. Using mathematical analysis with fundamental harmonic approximation, a design guideline is presented to avoid unnecessarily high frequency operation, to suppress the voltage stress on the link capacitors, and to achieve wide ZVS range even with low link capacitance. Simulation and hardware implementation are performed on a 5-W prototype system equipped with a 256-pF link capacitance and a 200-pF switch output capacitance. Results show that the proposed scheme ensures zero-voltage-switching from full load to 10% load, and the switching frequency and the link capacitor voltage stress are kept below 250 kHz and 452 V, respectively, in the full load condition.

• Fire Science and Engineering
• /
• v.15 no.3
• /
• pp.14-20
• /
• 2001

The flash points are one of the most important fundamental properties used to determine the potential for fire and explosion hazards of flammable substances. A classification of the flash points is important for the safe handling of flammable liquids which constitute the solvent mixtures. Basic to all flash points behavior are vapor pressure and explosive limits(lower explosive limit and upper explosive limit). The flash points of flammable solvent mixtures can be calculated with the appropriate use of the fundamental laws of Raoult, Dalton, Le Chatelier and activity coefficient models. In this study, the reference values of lower flash points were compared with the calculated values by using Raoult's law and MRSM(modified response surface methodology) model. The lower flash points were in agreement with the predicted by Raoult's law and MRSM model. By means of this methodology, it is possible to evaluate reliability of experimental data of the flash points of the flammable mixtures.

• Journal for History of Mathematics
• /
• v.31 no.2
• /
• pp.73-91
• /
• 2018

This study begins with the awareness of problem that the education of mathematics teachers has failed to link the limit and the infinite set conceptually. Thus, this study analyzes the historical and reciprocal development of the limit and the infinite set, and discusses how to improve the education of these concepts and their relation based on the outcome of this analysis. The results of the study confirm that the infinite set is the historical tool of linking the limit and the real numbers. Also, the result shows that the premise of 'the component of the straight line is a point.' had the fundamental role in the construction of the real numbers as an arithmetical continuum and that the moral certainty of this premise would be obtained through a thought experiment using an infinite set. Based on these findings, several proposals have been made regarding the teacher education of awakening someone to the fact that 'the theoretical foundation of the limit is the real numbers, and it is required to introduce an infinite set for dealing with the real numbers.' in this study. In particular, by presenting one method of constructing the real numbers as an arithmetical continuum based on a thought experiment about the component of the straight line, this study opens up the possibility of an education that could get the limit values psychologically connected to the infinite set in overcoming the epistemological obstacle related to the continuum concept.

• Structural Engineering and Mechanics
• /
• v.5 no.5
• /
• pp.553-563
• /
• 1997

A procedure is being developed for bolting plates to the sides of existing reinforced concrete beams to strengthen and stiffen them. Unlike standard composite steel and concrete beams in which there is longitudinal-partial-interaction at the steel/concrete interface (that is slip along the length of the beam), composite bolted side-plated reinforced-concrete beams are unique in that they also exhibit transverse-partial-interaction, that is slip transverse to the length of the beam. In this work, the fundamental mathematical models for transverse-partial-interaction and its interaction with longitudinal-partial-interaction are developed. The fundamental models are then further developed to determine the number of connectors required to resist the transverse forces and to limit the degree of transverse-partial-interaction in bolted side-plated reinforced concrete beams.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.550-555
• /
• 2005

In this research, safety requirements for guard rail, buffer stop, car stop scotch block, protection device, fire protection facilities, safety siding, escape facilities and inundation protection facilities are studied to establish a standard. First, various kinds of guard rails and their construction methods are investigated. Researches on the level difference of main track and guard rail, joint, length, and fastening force of guard rail are done. Second, the classification of buffer stop and car stop scotch block and its characteristics are examined, and the impact force, speed limit and capacity of buffer stop are summarized. Details of protection device, fire protection facilities, safety siding, escape facilities and inundation protection facilities are also investigated. From this fundamental research results, basic data on the safety facilities of railroad system are established.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.1-9
• /
• 2015

In recent years, the knowledge about bifidobacteria has considerably evolved thanks to recent progress in molecular biology. The analysis of the whole genome sequences of 48 taxa of bifidobacteria offers new perspectives for their classification, especially to set up limit between two species. Indeed, several species are presenting a high homology and should be reclassified. On the other hand, some subspecies are presenting a low homology and should therefore be reclassified into different species. In addition, a better knowledge of the genome of bifidobacteria allows a better understanding of the mechanisms involved in complex carbohydrate metabolism. The genome of some species of bifidobacteria from human but also from animal origin demonstrates high presence in genes involved in the metabolism of complex oligosaccharides. Those species should be further tested to confirm their potential to metabolize complex oligosaccharides in vitro and in vivo.

• Journal of the Korean Mathematical Society
• /
• v.50 no.4
• /
• pp.695-713
• /
• 2013

We formulate and study a predator-prey model with non-monotonic functional response type and weak Allee effects on the prey, which extends the system studied by Ruan and Xiao in [Global analysis in a predator-prey system with nonmonotonic functional response, SIAM J. Appl. Math. 61 (2001), no. 4, 1445-1472] but containing an extra term describing weak Allee effects on the prey. We obtain the global dynamics of the model by combining the global qualitative and bifurcation analysis. Our bifurcation analysis of the model indicates that it exhibits numerous kinds of bifurcation phenomena, including the saddle-node bifurcation, the supercritical and the subcritical Hopf bifurcations, and the homoclinic bifurcation, as the values of parameters vary. In the generic case, the model has the bifurcation of cusp type of codimension 2 (i.e., Bogdanov-Takens bifurcation).

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.1
• /
• pp.175-184
• /
• 2013

In this paper, the reverse Bonnesen style inequalities for convex domain in the Euclidean plane $\mathbb{R}^2$ are investigated. The Minkowski mixed convex set of two convex sets K and L is studied and some new geometric inequalities are obtained. From these inequalities obtained, some isoperimetric deficit upper limits, that is, the reverse Bonnesen style inequalities for convex domain K are obtained. These isoperimetric deficit upper limits obtained are more fundamental than the known results of Bottema ([5]) and Pleijel ([22]).

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1230-1239
• /
• 2018

We derive a factorization theorem for the jet mass distribution with a given $p^J_T$ for the inclusive production, where $p^J_T$ is a large jet transverse momentum. Considering the small jet radius limit ($R{\ll}1$), we factorize the scattering cross section into a partonic cross section, the fragmentation function to a jet, and the jet mass distribution function. The decoupled jet mass distributions for quark and gluon jets are well-normalized and scale invariant, and they can be extracted from the ratio of two scattering cross sections such as $d{\sigma}/(dp^J_TdM^2_J)$ and $d{\sigma}/dp^J_T $. When $M_J{\sim}p^J_TR$, the perturbative series expansion for the jet mass distributions works well. As the jet mass becomes small, large logarithms of $M_J/(p^J_TR)$ appear, and they can be systematically resummed through a more refined factorization theorem for the jet mass distribution.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1988

DS1 transmission systems use framing bit errors, bipolar violations and code-detected errors to estimate the bit error rate when determining errored and severely errored seconds. Using the coefficient of variation under the memoryless binary symmetric channel assumption, a basic framework to evaluate these estimation schemes is proposed to provide a practical guideline in determining errored and severely errored seconds which are fundamental in monitoring the real-ime error performance of DS1 transmission systems carrying live traffic. To evaluate the performance of the cyclic redundancy check code (CRC), a computer simulation model is used. Several drawbacks of the superframe format in association with real time error performance monitoring are discussed. A few recommendations are suggested in measuring errored and severely errored seconds, and determining service limit alarms through the use of the superframe format. Furthermore, we propose a new robust scheme for determining service limit alarms which take into consideration the limitations of some estimation schemes for the time interval of one second.