• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.88-92
• /
• 1990

An accurate analytical threshold model is presented for fully depleted SOI which has a Metal-Insulator-Semiconductor-Insulator-Metal structure. The threshold voltage is defined as the gate voltage at which the second derivative of the inversion charge with respect to the gate voltage is maximum. Therefore the model is self-consistent with the measurement scheme. Numerical simulations show good agreement with the model with less than 3% error.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.16-23
• /
• 2007

For a fully depleted SOI type symmetric double gate MOSFET, a simple expression for the threshold voltage has been derived in a closed-form To solve analytically the 2D Poisson's equation in a silicon body, the two-dimensional potential distribution is assumed approximately as a polynomial of fourth-order of x, vertical coordinate perpendicular to the silicon channel. From the derived expression for the surface potential, the threshold voltage can be obtained as a simple closed-form. Simulation result shows that the threshold voltage is exponentially dependent on channel length for the range of channel length up to $0.01\;[{\mu}m]$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.9-18
• /
• 2005

To make high-performance, low-power transistors beyond the technology node of 60 nm complementary metal-oxide-semiconductor field-effect transistors(C-MOSFETs) possible, the effect of electron mobility of the thickness of strained Si grown on a relaxed SiGe/SiO2/Si was investigated from the viewpoint of mobility enhancement via two approaches. First the parameters for the inter-valley phonon scattering model were optimized. Second, theoretical calculation of the electronic states of the two-fold and four-fold valleys in the strained Si inversion layer were performed, including such characteristics as the energy band diagrams, electron populations, electron concentrations, phonon scattering rate, and phonon-limited electron mobility. The electron mobility in an silicon germanium on insulator(SGOI) n-MOSFET was observed to be about 1.5 to 1.7 times higher than that of a conventional silicon on insulator(SOI) n-MOSFET over the whole range of Si thickness in the SOI structure. This trend was good consistent with our experimental results. In Particular, it was observed that when the strained Si thickness was decreased below 10 nm, the phonon-limited electron mobility in an SGOI n-MOSFT with a Si channel thickness of less than 6 nm differed significantly from that of the conventional SOI n-MOSFET. It can be attributed this difference that some electrons in the strained SGOI n-MOSFET inversion layer tunnelled into the SiGe layer, whereas carrier confinement occurred in the conventional SOI n-MOSFET. In addition, we confirmed that in the Si thickness range of from 10 nm to 3 nm the Phonon-limited electron mobility in an SGOI n-MOSFET was governed by the inter-valley Phonon scattering rate. This result indicates that a fully depleted C-MOSFET with a channel length of less than 15 m should be fabricated on an strained Si SGOI structure in order to obtain a higher drain current.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.96-99
• /
• 2012

We fabricated fully depleted (FD) SOI-based 1T-DRAM cells with planar channel or recessed channel and the electrical characteristics were investigated. In particular, the dependence of memory operating mode on the channel structure of 1T-DRAM cells was evaluated. As a result, the gate induced drain leakage current (GIDL) mode showed a better memory property for planar type 1T-DRAM. On the other hand, the impact ionization (II) mode is more effective for recessed type.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.153-153
• /
• 2009

We investigated the dependence of the memory margin of the Cap-less memory cell on the strain of top silicon channel layer and also compared kink effect of strained Cap-less memory cell with the conventional Cap-less memory cell. For comparison of the characteristic of the memory margin of Cap-less memory cell on the strain channel layer, Cap-less transistors were fabricated on fully depleted strained silicon-on-insulator of 0.73-% tensile strain and conventional silicon-on-insulator substrate. The thickness of channel layer was fabricated as 40 nm to obtain optimal memory margin. We obtained the enhancement of 2.12 times in the memory margin of Cap-less memory cell on strained-silicon-on-insulator substrate, compared with a conventional SOI substrate. In particular, much higher D1 current of Cap-less memory cell was observed, resulted from a higher drain conductance of 2.65 times at the kink region, induced by the 1.7 times higher electron mobility in the strain channel than the conventional Cap-less memory cell at the effective field of 0.3MV/cm. Enhancement of memory margin supports the strained Cap-less memory cell can be promising substrate structures to improve the characteristics of Cap-less memory cell.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.8-22
• /
• 2014

In the past few decades, CMOS logic technologies and devices have been successfully developed with the steady miniaturization of the feature size. At the sub-30-nm CMOS technology nodes, one of the main hurdles for continuously and successfully scaling down CMOS devices is the parametric failure caused by random variations such as line edge roughness (LER), random dopant fluctuation (RDF), and work-function variation (WFV). The characteristics of each random variation source and its effect on advanced device structures such as multigate and ultra-thin-body devices (vs. conventional planar bulk MOSFET) are discussed in detail. Further, suggested are suppression methods for the LER-, RDF-, and WFV-induced threshold voltage (VTH) variations in advanced CMOS logic technologies including the double-patterning and double-etching (2P2E) technique and in advanced device structures including the fully depleted silicon-on-insulator (FD-SOI) MOSFET and FinFET/tri-gate MOSFET at the sub-30-nm nodes. The segmented-channel MOSFET (SegFET) and junctionless transistor (JLT) that can suppress the random variations and the SegFET-/JLT-based static random access memory (SRAM) cell that enhance the read and write margins at a time, though generally with a trade-off between the read and the write margins, are introduced.