• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.41-50
• /
• 2020

This paper deals with the Braille Education System which complements the shortcomings of the existing Braille Learning Products. An application dedicated to the blind is configured to perform full functions through touch gestures and voice guidance for user convenience. Braille kit is produced for educational purposes through Arduino and 3D printing. The system supports the following functions. First, the learning of the most basic braille, such as initial consonants, final consonant, vowels, abbreviations, etc. Second, the ability to check learned braille by solving step quizzes. Third, translation of braille. Through the experiment, the recognition rate of touch gestures and the accuracy of braille expression were confirmed, and in case of translation, the translation was done as intended. The system allows blind people to learn braille efficiently.

• Journal of Environmental Health Sciences
• /
• v.47 no.1
• /
• pp.78-86
• /
• 2021

Objectives: The purposes of this study were to investigate the installation rates and status of indoor smoking rooms in public facilities and to determine the level of compliance level with smoke-free policies in accordance with the National Health Promotion Act. Methods: A visiting survey was conducted on 1,206 public facilities in the Seoul Metropolitan Area and the Daegu and Gyeongsangbuk-do Province area. Researchers selected public facilities such as bars, coffee houses, and internet cafes using convenient sampling. They visited without prior notice, checked the existence of indoor smoking rooms, and recorded their status. Results: Internet cafes (110/116) had the highest installation rate of indoor smoking rooms, followed by bowling clubs (17/19) and billiard rooms (87/100). Depending on the type of business, 50-88% of smoking rooms were not completely enclosed. Coin karaoke rooms showed the least inadequacy in this regard. In addition, out of 512 smoking rooms, in 33% (n = 169) smoking indoors was observed in non-smoking areas. Only 9% of public facilities were in full compliance with the indoor smoke-free regulation. Conclusions: It was found that most of the public facilities with indoor smoking rooms did not comply with the smoke-free policy, and smoking was still observed inside some facilities. Therefore, there is a need for a policy that prohibits indoor smoking rooms completely.

• Asia-Pacific Journal of Business
• /
• v.11 no.1
• /
• pp.145-165
• /
• 2020

Purpose - The purpose of this study is to suggest strategies and solutions for entering China in the tariff and non-tariff sectors of the cosmetic industry. Design/methodology/approach - This study analyzed the import tariff rate of cosmetics in China, and analyzed the export cost by actually interviewing the exporting companies to derive the economic effect of non-tariff measures. Findings - First, We proposed the use of the FTA business model (basic cosmetics), the use of Korea-China FTA tariffs (foam cleansing, toothpaste), and the use of APTA tariffs (perfume). Second, We proposed cooperation between the governments to facilitate customs clearance procedures and improvement of FTA awareness among corporate practitioners. Third, We proposed the expansion and support of the AEO MRA system and the expansion of Korea-China MOU conclusions regarding the certification system, and the international standardization of domestic licensing system and technical conditions. Fourth, We proposed the use of government-supported projects related to obtaining overseas certifications and overseas expansion through collaboration with the same industry. Research implications or Originality - HS3304 products excluded from the Korea-China FTA should take full advantage of the FTA business model. In addition, the non-tariff measure costs are fixed costs per year, so the ratio decreases as the number of exports and export volume increases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.339-345
• /
• 2021

With the development of online education due to COVID-19, the EduTech market, which combines new technologies such as AI and AR/VR in education is rapidly growing. In addition, the children's industry is steadily growing despite the decreasing birth rate every year as more and more families with one child per household are investing in their children. However, supply of contents to EduTech market is slow compared to demands that are increasing. Therefore, the purpose of this paper is to help solve these problems by developing and supporting AR kids contents with convenience, practicality, and efficiency using AR technology. AR content for supporting vocabulary learning for infants is not just an end to watching and listening, but an observation-driven model that can manipulate content directly, which attracts children's interest and helps children learn words. This paper is intended for infants from 15 months to 36 months old when full-fledged language development occurs.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.460-468
• /
• 2021

A TBM is an equipment that excavates a tunnel with a full face by rotating a circular cutter head and its advantages are fast excavation rate and safe construction. A TBM, which is primarily used for tunnel excavation on civil construction sites, is easily adaptable to information and communication technology. Research related to unmanned and automated technology is being actively pursued. TBM applications for mining and energy resource development in other countries were investigated in this study. The difference of TBM applications between the mining and energy resource development and civil construction sites was examined. Technical factors such as geological conditions, depth, site access, TBM launching, alignment and inclination, TBM size, and others that should be considered when choosing a TBM were investigated. Finally, the advantages and disadvantages of TBM application in mines and the technical requirements for TBM for successful mine application are summarized.

• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.2
• /
• pp.55-63
• /
• 2022

Objectives This review was conducted to evaluate effectiveness and safety of extracorporeal shock wave therapy (ESWT) with meridian and acupoint theory for adhesive capsulitis. Methods By December 2021, 11 electronic databases were reviewed with the key words 'extracorporeal shock wave' and '(acupuncture OR acupoint OR meridian)'. This key words was set up to increase the sensitivity of the search. After the search, adhesive capsulitis study was selected based on the title and abstract and then included after full-texts were read. Results Five randomized controlled trials were eligible in our inclusion criteria. The meta-analysis of 3 studies showed positive results for the using ESWT with meridian and acupoint theory for adhesive capsulitis compared with the control group on efficancy rate and range of shoulder flexion. Conclusions Some studies showed ESWT with meridian and acupoint theory were statistically effective to adhesive capsulitis. But the evidence is limited due to the defective design of the included randomized controlled trials (RCTs). So use of ESWT with meridian and acupoint theory for adhesive capsulitis has limited evidence. More well-designed RCTs are required to provide clearer evidence for this claim.

• Journal of Veterinary Science
• /
• v.23 no.5
• /
• pp.67.1-67.11
• /
• 2022

Background: Budgerigar fledgling disease polyomavirus (BFDV) is the pathogen that causes budgerigar fledgling disease in psittacine species. The clinical signs of PBFV infection include ascites, hepatitis, and crop stasis. BFDV is associated with a high mortality rate in nestling birds. In contrast, adult birds only have mild symptoms such as feather dystrophy. Objectives: This study aimed to determine the prevalence, genetic characteristics, and phylogenetic analysis of BFDV in pet parrots in Korea. Methods: Fecal and tissue samples were collected from 217 pet parrots from 10 veterinary hospitals including Chungbuk National University Veterinary Hospital. The molecular screening was performed using polymerase chain reaction (PCR) analysis of the small t/large T antigen gene segment. Full-length genome sequencing with the Sanger and phylogenetic analysis were performed on BFDV-positive samples. Results: The PCR results based on the small t/large T antigen gene marker indicated that BFDV DNA was present in 10 out of 217 screened samples. A whole-genome sequence was obtained from six strains and phylogenetic analysis revealed no significant relationship existed between the species and geographical locations amongst them. Conclusions: The prevalence of BFDV infection in South Korea is not high when compared to the prevalence of BFDV in other parts of the world, however, it has been reported sporadically in various species and geographic locations. The whole-genome analysis revealed 0.2%-0.3% variation in intragenomic homogeneity among the six strains analyzed. Korean strains are separately on the phylogenetic tree from their counterparts from China and Japan which might reflect the substantial genetic variation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.185-192
• /
• 2021

In this study, Full-scale hollow slab Mock-up with VPS(Void Plywood Slab System) was produced. Through Mock-up, the safety of the flat plate hollow slab against short-term sagging and long-term sagging is to be evaluated. The hollow rate of the mock-up specimen to which the hollow core slab was applied was designed to be 24%. When loading through concrete blocks, the most central part of the slab was deflection 8.88mm when loading. However, it shows a safe value compared to the reference value (l_n/240=17.93mm) for short-term deflection. As a result of 3 months of measurement of the mock-up experiment, the deflection at the center of the slab increased by 6.792mm from the initial deflection. In addition, it was found that the reference value by the load used suggested by KBC2016 was satisfied.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.75-81
• /
• 2022

Under the government's principle of paying for emissions, the RFID-based pay-as-you-go system, which charges fees in proportion to emissions, was fully implemented in 2012. As of the end of 2018, the penetration rate is about 40% based on 149 local governments and multi-family apartments nationwide. The introduction of equipment showed a reduction effect of about 20-30%. Problems with existing equipment also began to appear. This study tried to improve by applying and integrating the existing technologies to solve the fundamental problems of these inlets. In other words, the plan is to improve the environment around the food waste meter by changing the design so that the hopper goes deep into the food waste bin inside the food waste meter so that the food waste becomes full and is designed smoothly when replacing the collection container.

• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.191-198
• /
• 2022

With the world's fast expanding energy usage comes a slew of new issues. Because one-third of energy is lost in overcoming friction, tremendous effort is being directed into minimizing friction. Surface texturing is the latest surface treatment technology that uses grooves and dimples on the friction surface of the machine to significantly reduce friction and improve wear resistance. Despite the fact that many studies on this issue have been conducted, most of them focused on parallel surfaces, with relatively few cases of converging films, as in most sliding bearings. This study investigated the lubrication performance of surface-textured inclined slider bearings. We analyzed the continuity and Navier-Stokes equations using a commercial computational fluid dynamics code, FLUENT. The results show the pressure and velocity distributions and the lubrication performance according to the number and orientation of rectangular dimples. Partial texturing somewhat improves the lubrication performance of inclined slider bearings. The number of dimples with the maximum load-carrying capacity (LCC) and minimum friction is determined. When the major axis of the dimple is arranged in the sliding direction, the LCC and friction reduction are maximized. However, full texturing significantly reduces the LCC of the slider bearing and increases the flow rate. The results have the potential to improve the lubrication performance of various sliding bearings, but further research is required.