• 한국환경보건학회지
• /
• 제45권5호
• /
• pp.474-486
• /
• 2019

Objectives: This study was performed to investigate the emission characteristics of aldehydes emitted by the printing industry and to evaluate their impact on adjacent residential areas. Methods: Aldehydes and THC were measured from the front of the control device in the printing and coating process. Aldehydes and ketones were measured by workplace area, residential area, and background area to evaluate their impact. Results: The concentrations of formaldehyde (<0.047 ppm) and acetaldehyde (<0.068 ppm) in the printing and coating process were relatively low, and the methyl ethyl ketone used as the primary solvent was the main carbonyl compound in the printing process. The daily mean concentrations of formaldehyde and acetaldehyde were not significantly different by workplace area, residential area, or background area. However, the concentration of methyl ethyl ketone was high in the order of workplace area, residential area, and background area. Conclusions: The concentrations of formaldehyde and acetaldehyde in the adjacent residential areas are considered to be more influenced by secondary sources of photochemical reactions than by primary sources. Methyl ethyl ketone is considered to be highly influenced by the primary source, which is printing facilities.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2135-2146
• /
• 2022

A nuclear energy facility is one of the most critical facilities to be safely protected during and after operation because the physical destruction of its barriers by an external attack could release radioactivity into the environment and can cause harmful effects. The barrier walls of nuclear energy facilities should be sufficiently robust to protect essential facilities from external attack or sabotage. Physical protection system (PPS) vulnerability assessment of a typical small nuclear research reactor was carried out by simulating an external attack with a tri-nitro toluene (TNT) shaped charge and results are presented. The reinforced concrete (RC) barrier wall of the research reactor located at a distance of 50 m from a TNT-shaped charge was the target of external attack. For the purpose of the impact assessment of the RC barrier wall, a finite element method (FEM) is utilized to simulate the destruction condition. The study results showed that a hole-size of diameter 342 mm at the front side and 364 mm at the back side was created on the RC barrier wall as a result of a 143.35 kg TNT-shaped charge. This aperture would be large enough to let at least one person can pass through at a time. For the purpose of the PPS vulnerability assessment, an Estimate of Adversary Sequence Interruption (EASI) model was used, which enabled the determination of most vulnerable path to the target with a probability of interruption equal to 0.43. The study showed that the RC barrier wall is vulnerable to a TNT-shaped charge impact, which could in turn reduce the effectiveness of the PPS.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.643-646
• /
• 2009

This study was conducted to simulate the influence of vibration associated with cycling on the body. In this simulation the human model that the riding on a bicycle which have suspension and non-suspension front forks was used. And to arouse impact two kind of bump, 50mm height of radical raised spot and 150mm height of slow raised spot, were used. The vertical displacement of head, the vertical acceleration of head and the torque of neck joint were analysed. The results say that the function of shock absorbing was grater when passing though a 50mm height of radical raised spot then a 150mm height of slow raised spot.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.133-139
• /
• 2009

When two cars impact each other, it is usually known smaller vehicle's passenger likely to be more seriously injured than bigger one's. Generally it is known that SUVs and Light Truck Vehicles (LTVs) are bigger and heavier than passenger vehicles and their drive height such as bumper rail and side member, and front end stiffness are higher than those of passenger vehicles. Because of these characteristics the occupants of passenger vehicle struck by SUVs or LTVs are more likely to experience severe injury or fatal injury. To evaluate SUV and LTV's aggressivity to passenger vehicle, SUV to passenger vehicle and LTV to passenger vehicle head-on crash test have been carried out. And finally the way how to reduce incompatibility between SUV and LTV and passenger vehicles is suggested.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.72-77
• /
• 2007

Since 2000, sports utility vehicles(SUVs) occupy about 40% of domestic vehicle sales. As sports utility vehicle sales are increased the probability of crash accident between SUVs and passenger vehicles increases. Generally, SUVs are heavier than passenger vehicles and their drive height and front end stillness are higher than passenger vehicles. Because of these characteristics SUVs cause more severe injury and fatal injury in SUV to passenger vehicle head-on impact. To evaluate SUV's aggessivity to passenger vehicle, we carried out SUV to passenger vehicle head-on crash test. And finally the way how to reduce incompatibility between SUVs and passenger vehicles is suggested.

• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.743-754
• /
• 2015

FASCAM is a newly introduced mean against enemy fire power and supposed to be scattered on base areas in front of a tunnel so as to deter maneuver and shooting of enemy artilleries. However, for its characteristics different from conventional munitions, only a few studies have been undertaken on operations system using this new measure. In this research, we propose a procedure to describe and analyze mathematically an operation system for suppression of enemy fire power using FASCAM. Two suggested simulation methods, impact point generation and density integration, both can describe the actual operation rationally and each has advantages of its own respectively. Further, we demonstrated an example analysis to derive an optimal suppression plan based on the proposed procedure.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.214-221
• /
• 2003

Tension mask assembly is positioned right behind the glass-made front panels of CRT type display devices. The frame-supported thin metal sheet contains numerous slits, through which electron beams are focused to enhance definition. Pretension is imposed on the masks, especially for enlarged flat screens, in order to avoid vibration due to acoustic or mechanical impact. High temperature assembly process subsequent to pretensioning, however, degenerates the creep resistance of common mask materials, and if tensile stress is high enough, tension on the mask may be loosened substantially due to creep deformation. In this study, the assembly is modeled as a combined structure of beams and wire array, and a numerical simulation is attempted for pretensioning followed by high temperature process. According to a model study, small amount of creep strain is likely to be generated, but its adverse influence is not negligible. Some structural modification measures to reduce the creep-induced tension loosening are proposed and evaluated. Also, optimal configuration of frame structure is sought for, which maintains high tension of masks and minimizes the possible creep of frame simultaneously.

• 농촌지도와개발
• /
• 제23권4호
• /
• pp.431-439
• /
• 2016

There are rural development policy for creating liveable rural. The support structure of the capacity phase of the Master Plan of Comprehensive Rural Village Development Project would that one. The support structure of the capacity phase has implied the assumption that the accumulated capacity of the village to the previous step will have a significant impact on the business to the next level. Rural development should be understood that simple: rather than for business applications, processes community is going to build capacity through continuous learning and practice. Its accumulated capacity should be possible to predict and then steps must be developed continuously for a long time, looking at the previous phase. Thus, according to the support structure of the capacity phase, it should be applied a causal relationship between the front and rear phase.

• 한국멀티미디어학회논문지
• /
• 제17권11호
• /
• pp.1374-1381
• /
• 2014

Digital technology With the popularization of computers and IT technology development is causing a dramatic change across the human life. Increase of profit in fashion industry has a significant impact on the overall industry. It has been studied to develop consumer oriented higher value-added fashion products of including clothes using digital technology abroad. In this paper, we propose a system that when user stand in front of display, user can show body captured depth camera look the coordination of a variety of costume and fashion concept through a magic mirror. Using the system, we will satisfy the convenience of user and be used as a way appropriate to clothing shopping in the shortest time. The system will develop personalized fashion content industry enhanced interaction.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1499-1508
• /
• 1998

A numerical study is performed to investigate pressure drops, particle trajectories and erosion around orifice plates in pulverized coal pipe lines. Particle impaction rates change significantly with orifice shapes and Stokes numbers. At Reynolds number of $5{\times}10^5$, the pulverized coal flows well with streamlines and do not collide at the orifice plates at small sizes (${\sim}20{\mu}m$). However, the large particles (over $70{\mu}m$) impact on the front face of the orifice and erode the orifice surface. The pressure loss coefficients around the erode orifice are largely different from the designed original orifice.