• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.1
• /
• pp.113-119
• /
• 2006

It is now established that more than two types of blended aggregate have beneficial effects on quality and supply of concrete in the long run. However, studies on blended aggregate have not widely been progressive and the evaluation method of its most favorable mixture proportion is still needed. Therefore this study investigated the most favorable mixture proportion through the physical experiment of fresh and hardened state's cement mortar, in response to three types of composite ratio, natural fine aggregate(Ns), crushed fine aggregate(Cs) and recycled fine aggregate(Rs). Test showed that increase of blending ratio of Ns and Cs improved fluidity of mot1ar. For the properties of compressive and flexural strength, mortar blending Ns and Cs properly, exhibited similar value to one using only Cs, while mortar mixing Rs showed lower strength value as less as 6% of control one. Mortar using only Rs exhibited the largest drying shrinkage value. In addition, even thought it is not a clear quantitative analysis, technical-imaging-skill presenting the most favorable mixture proportion 3-dimensionally is proposed in this research, in order to notify the proportion easily.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.937-941
• /
• 2005

The antioxidant and anticancer activities of Styela plicata extracts were evaluated. When extracts were prepared with fresh Styela plicata (FR), extraction yield was in the order of methanol > ethanol = acetone > water among treated solvents. However, the extraction order was methanol > water > ethanol > acetate in freeze dried Styela plicata (FD). Radical scavenging activity was the highest in acetone extracts $(37.39\%)$ from FR, while in ethanol extracts $(78.40\%)$ from FD. Reducing power of FR was the greatest in methanol extracts (1.076), and that of FD in ethanol extracts (1.360). The acetone extracts from FD showed significant anticancer activity when revealed with human colon cancer cell line HT-29. These results indicated that extraction yields and properties of extracts from Styela plicata were variable depending on solvent and/or physicochemical state, and appropriate extraction process could provide some valuable bioactive materials from Styela plicata.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.435-440
• /
• 2003

Such fruits as nut persimmons, mandarin oranges and apples stored in the far-infrared radiated chamber at 5$^{\circ}C$ under 90% of relative humidity had been maintained in the fresh state for longer times than the control stored only in the cold chamber. Fruits stored in the far-infrared radiated chamber showed lower values in weight loss rate, microbial colony count and decay ratio and higher ascorbic acid content than the control stored only in the told room through the storage period. We confirmed that fruits stored in the far-infrared radiated chamber under low temperature and high humidity showed least changes in quality properties through the storage period and the far-infrared radiated facilities could be a good storage system.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.459-462
• /
• 2009

'Fuyu' (Diospyros kaki L.) is an important sweet persimmon cultivar, and the fruits are often stored in a modified atmosphere after harvesting in South Korea. However, blossom-end browning and darkening of fruit often occur after harvest or during storage, which decreases fruit quality in the fresh fruit market. High fruit calcium concentration would reduce oxidation of phenolic compounds in the cytoplasm such oxidation is responsible for fruit browning. This study investigated the effects of soluble calcium fertilization and foliar application, and indole-3-butyric acid (IBA) fertilization on fruit quality and browning. Trees received one of the following five treatments: 1) control (no calcium or IBA); 2) calcium fertilization (Ca FG, 2 mL per tree); 3) calcium foliar application (Ca FA, 2 mL); 4) calcium and IBA fertilization (Ca+IBA) 5) IBA fertilization (IBA, 2 mL. Fruit calcium concentration was highest in trees treated by Ca FA, and lowest in control trees. Generally, fruit calcium concentration was high in the stem end but low in the blossom end, which usually first develops fruit-browning symptoms. There were no apparent differences in fruit qualities such as firmness, soluble solid content, and weight among treatments. Fruit browning occurred at frequencies of about 14%, 20%, and 50% on Ca FA, Ca FG, and control trees, respectively. Therefore, the improved fruit calcium level seen when trees received Ca or IBA application tended to prevent fruit browning, which increased fruit quality and storage properties.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.186-197
• /
• 2022

The Daejanggakgibi Stele of Silleuksa Temple in Yeoju is a stone stele from the Goryeo Dynasty that is inscribed with various stories about the construction of Daejanggak, a place where Buddhist scriptures were kept. This stele has been maintained for a long time in a state in which discoloration of the body has occurred, and the inscription has been partially damaged due to dozens of cracks. Using non-destructive analysis methods for stone artifacts, material investigation, portable X-ray fluorescence analysis, and ultrasonic velocity analysis for the stele were performed. It was confirmed that the stele body was composed of light gray crystalline limestone, and the base stone, support stone, and cover stone were medium-grained biotite granite. Portable X-ray fluorescence analysis confirmed that iron(Fe) was an original coloring element of the stele surface. From the distribution pattern of the coloration, it can be inferred that iron-containing materials flew down from between the stele body and the cover stone. Thereafter, living organisms or organic contaminants attached to it so that yellow and black contaminants were formed. Ultrasonic diagnosis revealed that the physical property of both the front and back surfaces ranged from fresh rocks(FR) to completely weathered rocks(CW), and the average weathering index was grade 3(intermediate). However, the point where cracks developed intensively was judged to be the completely weathered stage(CW), and some cracks located in the upper and lower parts of the stele bear potentially very high risk. It is necessary to monitor the movement of these cracks and establish reinforcement measures for conservation in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.182-206
• /
• 2003

Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.551-558
• /
• 2011

This present study was performed to analyze the efficiency and volatility of a porous film containing $Chamaecyparis$ $obtusa$ extract as a method to effectively package food compounds. Phytoncide was contacted the state of gas and showed effective antimicrobial properties. Limonene can be distilled without decomposition as a relatively stable terpene and was one of the extract components. $Chamaecyparis$ $obtusa$ essential oil. The optimal solvent composition was a ratio 5:20:0.3 of T-500:ethanol:hardener to effectively manufacture film containing phytoncide essential oil and the minimum antibacterial concentration was 2%. The films were made under different conditions(A-50LF1, A-25SF2, B-50SF1, C-50LF1, C-25SF2 and D-50SF1) containing phytoncide and the amounts of limonene inside the 1-L reaction chamber depending on storage were measured by gas chromatography-mass selective detention. The results showed that the 25SF2(width, 25 mm; length, 20 cm) revealed more amount of limonene compared with 50LF1(width 50 mm, length 20 cm). We confirmed that the gas emission amount showed a better layer on the film side than on the internal film. An effect of film thickness on phytoncide emissions was observed in that the amounts was less than the expectation for a thicker film at the beginning time, but the emitting amounts increased with increasing storage periods. In the storage testing of various films at $35^{\circ}C$ and 70% humidity for 14 days, 25SF2 showed longer preservation compared with that of 50LF in the case of bread. $C.$ $obtusa$ essential oil is a useful fresh ingredients, hence, analysis of limonene emission kinetics from various film was helpful to develop films with an optimal antimicrobial effect, and will allow application of such films in food packaging systems.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.278-283
• /
• 2006

Styela clava was processed by four different kinds of method including FR (fresh S. clava), H1 (heat treated S. clava at $110^{\circ}C$ for 15 min) H2 (heat treated S. clava at $120^{\circ}C$ for 5 min), and FD (freeze dried S. clava). Each S. clava sample was treated with methanol, ethanol, acetone, and water, then antioxidant and anticancer activities of the extracts were evaluated. In extracts from non-dried S. clava (FR, H1, and H2), total extract yield decreased with increasing treated temperature. The extraction yield was in the order of ethanol>methanol>water>acetone among treated solvents. In case of dried S. clava (FR), the extraction yield was lower than non-dried samples, and was in the order of methanol>ethanol>water>acetone. The radical scavenging activity (RSA) of non-dried S. clava (FR, H1, and H2) was in the order of acetone>ethanol>methanol and heat treatment also decreased RSA. RSA of FD was the highest in ethanol extract, while acetone and water extracts did not show RSA. When antioxidant activity was determined by reducing power (RD), methanol extract of FR showed the highest values and heat treatment decreased RD, too. RD of FD was in the order of methanol>ethanol>water>acetone. The acetone extracts from FD showed significant anticancer activity against human colon cancer cell line HT-29. These results indicated that extraction yield and properties of extracts from S. clava were dependent on processing temperature, solvent and/or physicochemical state. The appropriate extraction process should provide some valuable bioactive materials from S. clava.