• 한국농공학회지
• /
• 제28권3호
• /
• pp.69-78
• /
• 1986

This studies were established to find out the characteristics of frequency distributiom for the number of occurrence and magnitude, probable flood flows according to the return periods, design floods, and design frequency factors for the studying basins in relation to the risk levels which can be correlated with design return period and the life of structure in the non-annual exceedance series. Eight watersheds along Han, Geum, Nak Dong and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Poisson distribution and Exponential distribution were tested as a good fitted distributions for the number of occurrence and magnitude for exceedance event, respectively,at selected watersheds along Han, Geum, Nak Dong and Seom Jin river basin. 2.Formulas for the probable flood flows and probable flood flows according to the return periods were derivated for the exponential distribution at the selected watersheds along Han, Geum, Nak Dong, and Seom Jin river basin. 3.Analysis for the risk of failure was connected return period with design life of structure in the non-annual exceedance series. 4.Empirical formulas for the design frequency factors were derivated from under the condition of the return periods identify with the life of structure in relation to the different risk levels in the non-annual exceedance series. 5.Design freguency factors were appeared to be increased in proportion to the return periods while those are in inverse proportion to the levels of the risk of failure. Numerical values for the design frequency factors for the non-annual exceedance series ware appeared generally higher than those of annual maximum series already published by the first report. 6. Design floods according to the different risk levels could be derivated by using of formulas of the design frequency factors for all studying watersheds in the nor-annual exceedance series.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.147-152
• /
• 2012

This paper dealt with the frequency component analysis of acoustic signals produced by corona and series-arc discharges as a diagnostic technique for closed-switchboards. Corona and series-arc discharge were simulated by a needle-plane electrode and an arc generator specified in UL1699, respectively. Acoustic signal was detected by a wideband acoustic sensor with a frequency bandwidth of 4 Hz~100 kHz (-3 dB). We analyzed frequency spectrums of the acoustic signals detected in various discharge conditions. The results showed that acoustic signals mainly exist in ranges from 30 kHz to 60 kHz. From the experimental results, an acoustic detection system which consists of a constant current power supply (CCP), a low noise amplifier (LNA) and a band pass filter was designed and fabricated. The CCP separates the signal component from the DC source of acoustic sensor, and the LNA has a gain of 40 dB in ranges of 280 Hz~320 kHz. The high and the low cut-off frequency are 30 kHz and 60 kHz, respectively. We could detect corona and series-arc discharges without any interference by the acoustic detection system, and the best frequency is considered in ranges of 30 kHz~60 kHz.

• 응용통계연구
• /
• 제31권5호
• /
• pp.667-675
• /
• 2018

초고빈도(ultra high frequency; UHF)시계열의 함수적 변동성 측정을 위한 최신 기법인 함수적 변동성 functional GARCH : fGARCH(1, 1) 모형을 소개하고 설명하였다. 실증분석을 위해 R-code fGARCH(1, 1) 프로그램을 KOSPI/현대차 초고빈도 수익률 자료에 적합하여 예시하였다.

• 전력전자학회논문지
• /
• 제17권1호
• /
• pp.77-84
• /
• 2012

This paper describes the process of optimal resonant frequency design with full-bridge series-loaded resonant dc-dc converter in a high efficiency 3.3 kW on-board battery charger application for Electric Vehicles and Plug-in Hybrid Electric Vehicles. The optimal range of resonant frequency and switching frequency used for ZVS are determined by considering trade-off between loss of switching devices and resonant network with size of passive/magnetic devices. In addition, it is defined charging region of battery, the load of on-board charger, as the area of load by deliberating the characteristic of resonant. It is verified the designed frequency band by reflecting the defined area on resonant frequency.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권7호
• /
• pp.265-272
• /
• 2006

This paper describes a method of parameter estimation of time series data using discrete Fourier transform(DFT). DFT have been mainly used to precisely and rapidly obtain the frequency of a signal. In a dynamic system, a real part of a mode used to learn damping characteristics is a more important factor than the frequency of the mode. The parameter estimation method of this paper can directly estimate modes and parameters, indicating the characteristics of a dynamic system, on the basis of the Fourier transform of the time series data. Real part of a mode estimates by subtracting a frequency of the Fourier spectrum corresponding to 0.707 of a magnitude of the peak spectrum from a peak frequency, or subtracting a frequency of the power spectrum corresponding to 0.5 of the peak power spectrum from a peak frequency, or comparing the Fourier(power) spectrum ratio. Also, the residue and phase of time signal calculate by simple equation with the real part of the mode and the power spectrum that have been calculated. Accordingly, the proposed algorithm is advantageous in that it can estimate parameters of the system through a single DFT without repeatedly calculating a DFT, thus shortening the time required to estimate the parameters.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.118-122
• /
• 2000

In this study, Ringing is investigated by continuous wavelet transform. Ringing is considered to be one of the typical transient phenomena in the field of ocean engineering. The wavelet analysis is adopted to analyze ringing from the point that wavelet analysis is capable of frequency analysis as well as time domain analysis. The use mother wavelet is the Morlet wavelet. The relation between the frequency of the time series and that of wavelet can be clearly defined with Mor1et wavelet. Experimental data obtained by other researchers was used. The wave height time series and acceleration times series of the surface piercing cylinder were analyzed. The results show that the proposed scheme can detect typical frequency region by the time domain analysis which could hardly be detected if one relied on the frequency analysis.

• Water Engineering Research
• /
• 제2권1호
• /
• pp.1-10
• /
• 2001

The frequency analyses for the precipitation data in Korea were performed. We used daily maximum series, monthly maximum series, and annual series. For nonparametric frequency analyses, variable kernel estimators were used. Nonparametric methods do not require assumptions about the underlying populations from which the data are obtained. Therefore, they are better suited for multimodal distributions with the advantage of not requiring a distributional assumption. In order to compare their performance with parametric distributions, we considered several probability density functions. They are Gamma, Gumbel, Log-normal, Log-Pearson type III, Exponential, Generalized logistic, Generalized Pareto, and Wakeby distributions. The variable kernel estimates are comparable and are in the middle of the range of the parametric estimates. The variable kernel estimates show a very small probability in extrapolation beyond the largest observed data in the sample. However, the log-variable kernel estimates remedied these defects with the log-transformed data.

• Journal of the Korean Data and Information Science Society
• /
• 제14권3호
• /
• pp.571-578
• /
• 2003

In this paper, we consider two components system which have bivariate weibull model with bivariate type I censored data. We proposed maximum likelihood estimator and relative frequency estimator for the reliability of series system. Also, we construct approximate confidence intervals for the reliability based on the two proposed estimators. And we present a numerical study.

• Journal of the Korean Data and Information Science Society
• /
• 제15권1호
• /
• pp.219-226
• /
• 2004

In this paper, we consider two-components system which the lifetimes have a bivariate Weibull distribution with bivariate random censored data. Here the bivariate censoring times are independent of the lifetimes of the components. We obtain estimators and approximated confidence intervals for the reliability of series system based on likelihood function and relative frequency, respectively. Also we present a numerical study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1066-1071
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.