• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2925-2930
• /
• 2011

최근의 차량 연비는 고가의 연료 가격과 환경 규제 등으로 인하여 중요한 문제로 대두되었다. 전기, 전자, 기계 등의 기술 발달에 힘입어 연비는 많이 개선되었으나 현재도 연비 측정은 주어진 모드(LA-4, FTP-75 등)에서 컴퓨터 모의시험 및 다이나모에서 수행한다. 이러한 연비는 실제 도로 주행 연비와 차이가 발생한다. 그 주요 원인중의 하나는 도로의 경사를 고려하지 않았기 때문이다. 본 논문에서는 경사가 포함된 고속도로에서 경사가 연비에 미치는 영향을 평가하기 위하여 경사가 포함된 영동고속도로를 주행하여 연료 소모량을 측정하고 연비를 계산한다. 또한 같은 도로를 경사가 없다고 가정하여 주행한 연비와 비교 분석한다. 이때 두 경우의 연료 소모량 차이에 의해 발생된 총 발생 에너지를 계산하고, 모의실험에서 타이어 구동력으로 부터 발생한 엔진 토크와 파워 데이터로부터 구동력에 소모된 에너지를 계산한다. 이제 도로의 경사 때문에 소모된 연료에 의해 발생된 총 발생에너지와 구동력에 사용된 에너지와의 관계를 검증한다. 또한 결론에서는 경사를 갖는 자동차 전용도로에서 경사에도 불구하고 연비를 향상할 수 있는 방안을 제시한다.

• Restorative Dentistry and Endodontics
• /
• 제33권5호
• /
• pp.457-462
• /
• 2008

중합수축이 일어난 후 복합 레진 내에는 중합수축에서 기원한 응력이 내부에 남아있을 수 있는데 이를 "잔류응력"이라 한다. 수복물에 가해지는 총힘은 외부에서 가해지는 힘과 내부에 남아있는 응력의 합으로 결정이 되며 수복물의 실패를 이해하기 위해서 이 두 가지 요소가 반드시 고려되어야 한다. 본 연구에서는 ring slitting방법을 이용하여 최근 임상에 소개된 나노충진형 복합레진간의 잔류응력을 비교하였다. 실험에 사용한 복합레진은 대조군으로 microhybrid-type인 Z250과 nanofiller를 함유한 Grandio, Filtek Supreme, Ceram-X를 이용하여 복합레진 링을 제작하고 2개의 기준점을 표시한 후 이 사이의 거리를 링 절단 전과 후에 각각 측정하여 거리 변화를 측정하였다. 거리의 변화로부터 average circumferential residual stress $({\sigma}{\theta})$를 계산하였다. 10분과 1시간 경과 후 측정한 군에서는 Filtek Supreme이 Z250이나 Ceram-X보다 높은 잔류응력을 보여 주었고, 24시간 경과한 군에서는 Filtek Supreme이 나머지 군보다 높은 잔류응력을 보여주었다. 본 실험 결과에 의하면 nanofiller를 함유한 복합레진의 잔류응력은 대조군으로 사용한 Z250보다 높거나 같은 값을 나타냈으며 거의 비슷한 기질조성을 가진 Z250과 Filtek Supreme을 비교했을 때 Filtek supreme이 모든 측정시간대에서 높은 잔류응력을 보여주었다.

• 비파괴검사학회지
• /
• 제27권4호
• /
• pp.345-353
• /
• 2007

근접장 마이크로파 현미경을 이용하여 수중에서 시료의 표면이미지에 대한 비파괴적 측정에 관한 연구를 하였다. 이때 근접장 마이크로파 현미경은 3.5-5.5 GHz에서 작동되었다. 본 연구에서는 수중에서 시료의 표면특성을 손상 없이 측정하기 위해 강성힘을 이용한 튜닝폭(tuning fork) 거리조절 시스템으로 팁과 시료 사이의 거리를 10 nm로 유지하였다. 더불어, 공기 및 수중에서 튜닝폭의 진동진폭의 변화와 공진주파수의 변화를 측정하여 수중에서 튜닝폭리 반응특성을 저하시키는 원인에 대해 알아보았다. 물 속에 시료가 충분히 잠기고, 동시에 물의 영향을 최소화하기 위해 팁의 길이를 2 mm로 제작하여 튜닝폭의 한 쪽면에 붙였다. 또한 측정과정에서 나타나는 증발현상을 해소하기 위해 엑츄에이터를 이용하여 보충용 수조를 제작하였으며, 보다 정확한 수중측정을 위해 보정프로그램을 응용하였다. 이를 통해, 시료의 공기 및 수중 측정의 가능성을 확인하기 위해 도체시료의 표면특성을 관측하고 비교하였다.

• Wind and Structures
• /
• 제28권2호
• /
• pp.71-87
• /
• 2019

The yaw and interference effects of blades affect aerodynamic performance of large wind turbine system significantly, thus influencing wind-induced response and stability performance of the tower-blade system. In this study, the 5MW wind turbine which was developed by Nanjing University of Aeronautics and Astronautics (NUAA) was chosen as the research object. Large eddy simulation on flow field and aerodynamics of its wind turbine system with different yaw angles($0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$) under the most unfavorable blade position was carried out. Results were compared with codes and measurement results at home and abroad, which verified validity of large eddy simulation. On this basis, effects of yaw angle on average wind pressure, fluctuating wind pressure, lift coefficient, resistance coefficient,streaming and wake characteristics on different interference zone of tower of wind turbine were analyzed. Next, the blade-cabin-tower-foundation integrated coupling model of the large wind turbine was constructed based on finite element method. Dynamic characteristics, wind-induced response and stability performance of the wind turbine structural system under different yaw angle were analyzed systematically. Research results demonstrate that with the increase of yaw angle, the maximum negative pressure and extreme negative pressure of the significant interference zone of the tower present a V-shaped variation trend, whereas the layer resistance coefficient increases gradually. By contrast, the maximum negative pressure, extreme negative pressure and layer resistance coefficient of the non-interference zone remain basically same. Effects of streaming and wake weaken gradually. When the yaw angle increases to $45^{\circ}$, aerodynamic force of the tower is close with that when there's no blade yaw and interference. As the height of significant interference zone increases, layer resistance coefficient decreases firstly and then increases under different yaw angles. Maximum means and mean square error (MSE) of radial displacement under different yaw angles all occur at circumferential $0^{\circ}$ and $180^{\circ}$ of the tower. The maximum bending moment at tower bottom is at circumferential $20^{\circ}$. When the yaw angle is $0^{\circ}$, the maximum downwind displacement responses of different blades are higher than 2.7 m. With the increase of yaw angle, MSEs of radial displacement at tower top, downwind displacement of blades, internal force at blade roots all decrease gradually, while the critical wind speed decreases firstly and then increases and finally decreases. The comprehensive analysis shows that the worst aerodynamic performance and wind-induced response of the wind turbine system are achieved when the yaw angle is $0^{\circ}$, whereas the worst stability performance and ultimate bearing capacity are achieved when the yaw angle is $45^{\circ}$.

• 대한통합의학회지
• /
• 제8권4호
• /
• pp.223-230
• /
• 2020

Purpose : The purpose of this study was to examine the effects of tools (i., extracorporeal shock wave therapy, massage gun, and foam roller) on range of motion, muscle tone and pain threshold among patients with hamstring stiffness. Methods : Fourteen participants with hamstrings stiffness were recruited. Interventions were performed 6 times, and each session was for 30 seconds using the three tools. The range of motion, muscle tone, and pain threshold were measured. The order of the use of the three tools was randomly determined. The foam roller was made to move from the bottom of the hip crease to the upper part of the back of the hamstring. Additionally, velocity 5 vibration stimulation was performed on the hamstring using a massage gun. Moreover, vibration stimulation was performed on the hamstring with extracorporeal shock wave therapy 5 minutes, 5 Hz, and 1,500 strokes. The flexibility of the posterior thigh muscle was based on maintaining the knee and hip joints in a 90 ° bend in the supine position. The joint angle of the knee was measured, when the knee was actively extended, at the maximum point where the posterior thigh muscle was stretched. The elasticity of the posterior thigh muscle was measured while the subject was prone and in a relaxed state without any force. Measurements were made at the muscle abdominal area of the semitendinosus muscle of the posterior femur, and the area to be measured was marked with a pen. The measurement of the tenderness threshold of the posterior femur was measured using a tenderness meter(Commander Algometer, J-Tech, USA). The force value at the point at which the pressure sensation change to pain was measured after applying vertical pressure to the posterior femur muscle, which was the halfway point between the ischial tuberosity and the popliteal surface of the subject lying on their stomach. Results : The extracorporeal shock wave therapy increased stiffness and, muscle tone, and caused changes in the pain threshold, whereas the other two tools had no effect on these indices. Conclusion : Extracorporeal shock wave therapy has important effects on range of motion and muscle stiffness and can be used in warmup protocols.

• 한국지반공학회논문집
• /
• 제25권4호
• /
• pp.19-29
• /
• 2009

본 연구에서는 실제 붕괴가 발생한 토류벽을 대상으로 해석 기법에 따른 시공단계별 거동특성을 분석하기 위하여, 단계별 굴착에 따른 토류벽의 변위, 휨모멘트, 토압분포, 예상 활동 파괴면을 수치해석을 통해 분석하였다. 특히 수치해석에 사용되는 해석기법으로, 벽계와 지반의 상호작용이 고려되는 전단강도 감소기법과 상호작용을 고려하지 않는 탄소성 해석으로 나누어 해석기법에 따른 벽체의 거동 차이를 비교 하였다. 본 연구결과, 벽체의 휨모멘트와 토압은 해석기법에 따른 차이가 크지 않았지만, 지표 근처에서의 벽체 변위는 큰 차이를 나타냈다. 또한 실측 데이터와의 비교결과 탄소성 해석을 통한 해석 결과가 전단강도 감소기법을 통한 해석 결과보다 전체적으로 변위 및 파괴면 예측에서 과소 평가 되는 것으로 나타났다. 따라서, 전단강도 감소기법을 통한 유한요소 해석은 벽체의 시공 안정성 및 붕괴 후 원인 분석 등의 좀 더 세밀한 검토가 필요한 작업에서 유용하게 사용할 수 있으며, 탄소성 해석기법은 1차적인 설계 정도에 사용하여야 할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.195-208
• /
• 2023

The nodular diaphragm wall (NDW) is a novel type of foundation with favorable engineering characteristics, which has already been utilized in high-rise buildings and high-speed railways. Compared to traditional diaphragm walls, the NDW offers significantly improved vertical bearing capacity due to the presence of nodular parts while reducing construction time and excavation work. Despite its potential, research on the vertical bearing characteristics of NDW requires further study, and the investigation and visualization of its displacement pattern and failure mode are scant. Meanwhile, the measurement of the force component acting on the nodular parts remains challenging. In this paper, the vertical bearing characteristics of NDW are studied in detail through the indoor model test, and the displacement and failure mode of the foundation is analyzed using particle image velocimetry (PIV) technology. The principles and methods for monitoring the force acting on the nodular parts are described in detail. The research results show that the nodular part plays an essential role in the bearing capacity of the NDW, and its maximum load-bearing ratio can reach 30.92%. The existence of the bottom nodular part contributes more to the bearing capacity of the foundation compared to the middle nodular part, and the use of both middle and bottom nodular parts increases the bearing capacity of the foundation by about 9~12% compared to a single nodular part of the NDW. The increase in the number of nodular parts cannot produce a simple superposition effect on the resistance born by the nodular parts since the nodular parts have an insignificant influence on the exertion and distribution of the skin friction of NDW. The existence of the nodular part changes the displacement field of the soil around NDW and increases the displacement influence range of the foundation to a certain extent. For NDWs with three different nodal arrangements, the failure modes of the foundations appear to be local shear failures. Overall, this study provides valuable insights into the performance and behavior of NDWs, which will aid in their effective utilization and further research in the field.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.99-118
• /
• 2004

The aim of this study is to evaluate tennis shoes's plantar pressure distribution in tennis prayers and to determine the influence of the shoe on various tennis movements. When investigating the biomechanics of movement in tennis, one of the first things to do is to understand the movement patterns of the sport, specifically how these patterns relate to different tennis shoes. Once these patterns are understood, footwear company can design tennis shoes that match the individual needs of tennis players. Plantar pressure measurement is widely employed to study foot function, the mechanical pathogenesis for foot disease and as a diagnostic and outcome measurement tool for many performance. Measurements were taken of plantar pressure distribution across the foot and using F-Scan(Tekscan Inc.) systems respectively. The F-Scan system for dynamic in-shoe foot pressure measurements has enabled us to assess quantitatively the efficacy of different types of footwear in reducing foot pressures. The Tekscan F-Scan system consists of a flexible, 0.18mm thick sole-shape having 1260 pressure sensors, the sensor insole was trimmed to fit the subjects' right, left shoes. For this study 4 university male, high level tennis players were instructed to hit alternated forehand stroke, backhand stroke, forehand volley, backhand volley, smash, service movement in 4 different tennis shoes. 1. When impact in tennis movement, peak pressure distribution of landing foot displayed D>C>B>A, A displayed the best low pressure distribution. A style's tennis shoes will suggest prayer with high impact. If prayer with high impact feeling during pray in tennis wear A style, it will decrease injury, will have performance improvement. 2. When impact in tennis movement, plantar pattern of pressure distribution in landing foot displayed B>A>C>D in stability performance. During tennis, prayer want to stability movement suggest B style tennis shoes when tennis movement impact keep stability of human body. B style tennis shoes give performance improvement 3. When impact in tennis movement, plantar pattern of center of force(C.O.F.)trajectory in landing foot analyzed this : 1) When stroke movement and volley movement in tennis, prayer better to rearfoot movement. 2) when service movement, prayer midfoot strike movement. 3) when smash movement, prayer have forefoot strike movement.

• 한국운동역학회지
• /
• 제18권1호
• /
• pp.213-226
• /
• 2008

본 연구의 목적은 유도의 기본 기술인 당기기, 후리기 훈련 및 측정이 가능한 사람-받기(파트너) 역할을 대신할 수 있는 장비인 유도 인형(doll-uke, 장비-받기)을 개발하는데 있다. 기본 방향은 사람-받기와 최대한 유사한 구조와 기능을 갖도록 하고, 절차는 [기본 모형 설계-제작-평가(1)-모형(2) 평가(2)-1차 제작-보완-2차 제작-보완-평가(3)-완성(최종 제작)- 데이터 취득 장치 연결-완성]의 단계를 거쳤다. 평가는 사람-받기와 장비-받기를 상대로 하는 경우, 당기기 밧다리후리기 동작에 대한 역학적 유사성을 위해 각 변인의 상대수준차를 계산하였으며, 선수들과 지도자의 설문 평가 단계를 거쳤다. 개발된 장비-받기의 구조는 크게 유도인형(doll-uke)과 힘 측정시스템(doll-uke fore system)이다. 밧다리후리기 발휘, 시 사람을 대신한 장비-받기의 역학적 변인들에서 재현율이 관찰되었으며, 동작 패턴이 사람-받기의 유사함과 설문 평가에서도 유용성이 인정되었다. 사람-받기를 대신할 훈련 및 측정 장비인 유도 인형(doll-uke)을 이용함으로서 당기기 밀기 후리기 등의 기술 강화는 물론, 동작 시 발휘되는 힘의 정량적 데이터를 용이하게 얻어 선수들에게 피드백을 제공해줌으로써, 정성적 정량적 분석을 통한 훈련 현장의 과학화, 경기력 향상을 기대할 수 있겠다.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.704-723
• /
• 2000

This study was undertaken to evaluate the tensile bond strength of In-Ceram alumina core treat-ed by ion assisted reaction(IAR). Ion assisted reaction is a prospective surface modification technique without damage by a keV low energy ion beam irradiation in reactive gas environments or reactive ion itself. 120 In-Ceram specimens were fabricated according to manufacturer's directions and divided into six groups by surface treatment methods of In-Ceram alumina core. SD group(control group): sandblasting SL group: sandblasting + silane treatment SC group: sandblasting + Siloc treatment IAR I group: sandblasting + Ion assisted reaction with argon ion and oxygen gas IAR II group: sandblasting + Ion assisted reaction with oxygen ion and oxygen gas IAR III group: sandblasting + Ion assisted reaction with oxygen ion only For measuring of tensile bond strength, pairs of specimens within a group were bonded with Panavia 21 resin cement using special device secured that the film thickness was $80{\mu}m$. The results of tensile strength were statistically analyzed with the SPSS release version 8.0 programs. Physical change like surface roughness of In-Ceram alumina core treated by ion assistad reaction was evaluated by Contact Angle Measurement, Scanning Electron Microscopy, Atomic Force Microscopy; chemical surface change was evaluated by X-ray Photoelectron Spectroscopy. The results as follows: 1. In tensile bond strength, there were no statistically significant differences with SC group, IAR groups and SL group except control group(P<0.05). 2. Contact angle measurement showed that wettability of In-Ceram alumina core was enhanced after IAR treatment. 3. SEM and AFM showed that surface roughness of In-Ceram alumina core was not changed after IAR treatment. 4. XPS showed that IAR treatment of In-Ceram alumina core was enabled to create a new functional layer. A keV IAR treatment of In-Ceram alumina core could enhanced tensile bond strength with resin cement. In the future, this ion assisted reaction may be used effectively in various dental materials as well as in In-Ceram to promote the bond strength to natural tooth structure.