Browse > Article
http://dx.doi.org/10.12989/was.2019.28.2.071

Wind load and wind-induced effect of the large wind turbine tower-blade system considering blade yaw and interference  

Ke, S.T. (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics)
Wang, X.H. (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics)
Ge, Y.J. (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University)
Publication Information
Wind and Structures / v.28, no.2, 2019 , pp. 71-87 More about this Journal
Abstract
The yaw and interference effects of blades affect aerodynamic performance of large wind turbine system significantly, thus influencing wind-induced response and stability performance of the tower-blade system. In this study, the 5MW wind turbine which was developed by Nanjing University of Aeronautics and Astronautics (NUAA) was chosen as the research object. Large eddy simulation on flow field and aerodynamics of its wind turbine system with different yaw angles($0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$) under the most unfavorable blade position was carried out. Results were compared with codes and measurement results at home and abroad, which verified validity of large eddy simulation. On this basis, effects of yaw angle on average wind pressure, fluctuating wind pressure, lift coefficient, resistance coefficient,streaming and wake characteristics on different interference zone of tower of wind turbine were analyzed. Next, the blade-cabin-tower-foundation integrated coupling model of the large wind turbine was constructed based on finite element method. Dynamic characteristics, wind-induced response and stability performance of the wind turbine structural system under different yaw angle were analyzed systematically. Research results demonstrate that with the increase of yaw angle, the maximum negative pressure and extreme negative pressure of the significant interference zone of the tower present a V-shaped variation trend, whereas the layer resistance coefficient increases gradually. By contrast, the maximum negative pressure, extreme negative pressure and layer resistance coefficient of the non-interference zone remain basically same. Effects of streaming and wake weaken gradually. When the yaw angle increases to $45^{\circ}$, aerodynamic force of the tower is close with that when there's no blade yaw and interference. As the height of significant interference zone increases, layer resistance coefficient decreases firstly and then increases under different yaw angles. Maximum means and mean square error (MSE) of radial displacement under different yaw angles all occur at circumferential $0^{\circ}$ and $180^{\circ}$ of the tower. The maximum bending moment at tower bottom is at circumferential $20^{\circ}$. When the yaw angle is $0^{\circ}$, the maximum downwind displacement responses of different blades are higher than 2.7 m. With the increase of yaw angle, MSEs of radial displacement at tower top, downwind displacement of blades, internal force at blade roots all decrease gradually, while the critical wind speed decreases firstly and then increases and finally decreases. The comprehensive analysis shows that the worst aerodynamic performance and wind-induced response of the wind turbine system are achieved when the yaw angle is $0^{\circ}$, whereas the worst stability performance and ultimate bearing capacity are achieved when the yaw angle is $45^{\circ}$.
Keywords
large wind turbine system; large eddy simulation; yaw effect; aerodynamic performance; wind-induced response; stability performance;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Li, X.N., Lu, Y., Liu, Q.K., et al. (2015), "Experimental study on wind-included interference effects of circular section chimneys", Eng. Mech., 1, 159-162. (In Chinese).
2 Majid, B. and Fernando, P.A. (2016), "Experimental and theoretical study of windA turbine wakes in yawed conditions", J. Fluid Mech., 806, 506-541.   DOI
3 Mo, J.O., Choudhry, A., Arjomandi, M., Kelso, R. and Lee, Y.H. (2013), "Effects of wind speed changes on wake instability of a wind turbine in a virtual wind tunnel using large eddy simulation", J. Wind Eng. Ind. Aerod., 117(117), 38-56.   DOI
4 Nishimura, H. and Taniike, Y. (2001), "Aerodynamic characteristics of fluctuating forces on a circular cylinder", J. Wind Eng. Ind. Aerod., 89(1), 713-723.   DOI
5 Smagorinsky, J. (1963), "General circulation experiments with the primitive equations", Mon. Weather Rev., 91(3), 99-164.   DOI
6 Wang, L., Liu, X., Renevier, N., Stables, M. and Hall, G.M. (2014), "Nonlinear aeroelasticmodelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theory", Energy, 76(76), 487-501.   DOI
7 Wang, Q., Zhou, H. and Wan, D. (2012), "Numerical Simulation of Wind Turbine Blade-Tower Interaction", J. Mar. Sci. Appl., 11(3), 321-327.   DOI
8 Chattot, J.J. (2008), "Tower shadow modelization with helicoidal vortex method", Comput. Fluids, 37(5), 499-504.   DOI
9 Chattot, J.J. (2009), "Effects of blade tip modifications on wind turbine performance using vortex model", Comput. Fluid., 38(7), 1405-1410.   DOI
10 Gallego-Calderon, J. and Natarajan, A. (2015), "Assessment of wind turbine drive-train fatigue loads under torsional excitation", Eng. Struct., 103(15), 189-202.   DOI
11 GB 50009-2012 (2012), Load code for the design of building structures, The Ministry of Structure of the People's Republic of China, Beijing.(In Chinese).
12 Hamilton, N. and Cal, R.B. (2015), "Anisotropy of the Reynolds stress tensor in the wakes of wind turbine arrays in Cartesian arrangements with counter-rotating rotors", Phys. Fluid., 27(1), 013106-24.
13 Hou, P., Hu, W., Chen, C., Soltani, M. and Chen, Z. (2016), "Optimization of offshore wind farm layout in restricted zones", Energy, 113, 487-496.   DOI
14 Hughes, F.M., Anaya-Lara, O., Ramtharan, G., Jenkins, N. and Strbac, G. (2008), "Influence of tower shadow and wind turbulence on the performance of power system stabilizers for DFIG-based wind farms", IEEE T. Energ. Conver., 23(2), 519-528.   DOI
15 Jeong, M.S., Kim, S.W., Lee, I., Yoo, S.J. and Park, K.C. (2013), "The impact of yaw error on aeroelastic characteristics of a horizontal axis wind turbine blade", Renew. Energ., 60(5), 256-268.   DOI
16 Jimenez, A., Crespo, A. and Migoya, E. (2010), "Application of a LES technique to characterize the wake deflection of a wind turbine in yaw", Wind Energy, 13(6), 559-572.   DOI
17 Ke, S.T., Yu, W., Wang, T.G., Zhao, L. and Ge, Y.J. (2016), "Wind loads and load-effects of large scale wind turbine tower with different halt positions of blade", Wind Struct., 23(6), 559-575.   DOI
18 Ke, S.T., Wang, T.G., Ge, Y.J. and Tamura, Y. (2014), "Windinduced responses and equivalent static wind loads of towerblade coupled large wind turbine system", Struct. Eng. Mech., 52(3), 485-505.   DOI
19 Ke, S.T., Wang, T.G., Ge, Y.J., et al. (2015), "Aeroelastic Responses of ultra Large Wind Turbine tower-blade coupled structures with SSI Effect", Adv. Struct. Eng., 18(12), 2075-2087.   DOI
20 Ke, S.T., Yu, W., Wang, T.G., Ge, Y.J. and Tamura, Y. (2017), "The effect of blade positions on the aerodynamic performances of wind turbine system", Wind Struct., 24(3):205-221.   DOI
21 Kong, C., Bang, J. and Sugiyama, Y. (2005), "Structural investigation of composite wind turbine blade considering various load cases and fatigue life", Energy, 30(11), 2101-2114.   DOI
22 Kuo, J.Y.J., Romero, D.A., Beck, J.C. and Amon, C.H. (2016), "Wind farm layout optimization on complex terrains - Integrating a CFD wake model with mixed-integer programming", Appl. Energ., 178, 404-414.   DOI