• Current Optics and Photonics
• /
• v.4 no.2
• /
• pp.134-140
• /
• 2020

A significant enhancement of the magneto-optical Faraday rotation and extraordinary optical transmission (EOT) in the cascaded double-fishnet (CDF) structure with periodic rectangular apertures is theoretically predicted by using the extended finite difference time domain (FDTD) method. The results demonstrate that the transmittance spectrum of the CDF structure has two EOT resonant peaks in a broad spectrum spanning visible to near-infrared wavebands, one of them coinciding with the enhanced Faraday rotation and large figure of merit (FOM) at the same wavelength. It is most important that the resonant position and intensity of the transmittance, Faraday rotation and FOM can be simply tailored by adjusting the incident wavelength, the thickness of the magnetic layer, and the offset between two metallic rectangular apertures, etc. Furthermore, the intrinsic physical mechanism of the resonance characteristics of the transmittance and Faraday rotation is thoroughly studied by investigating the electromagnetic field distributions at the location of resonance. It is shown that the transmittance resonance is mainly determined by different hybrid modes of surface plasmons (SPs) and plasmonic electromagnetically induced transparency (EIT) behavior, and the enhancement of Faraday rotation is mostly governed by the plasmonic electromagnetically induced absorption (EIA) behavior and the conversion of the transverse magnetic (TM) mode and transverse electric (TE) mode in the magnetic dielectric layer.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.14-20
• /
• 2007

This paper presents quaternary D flip-flop with advanced performance. Quaternary D flip-flop is composed of the components such as thermometer code output circuit, EX-OR gate, bias inverter, transmission gate and binary D flip-flop circuit. The designed circuit is simulated by HSPICE in $0.35{\mu}m$ one-poly six-metal CMOS process parameters with a single +3.3V supply voltage. In the simulations, sampling frequencies is measured around 100MHz. The PDP parameters and FOM we estimated to be 59.3fJ, 33.7 respectively.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.381-387
• /
• 1992

Optimum counting condition of a low level liquid scintillation counter for radiocarbon dating has been determined to minimize the contribution of tritium activity and get the highest FOM by the variation of scintillation solutions, scintillation solution to benzene ratio, and ${\beta}$-ray spectrum counting ranges. Under the condition, background count rate has been reduced to $2.26{\pm}0.03cpm$, and the maximum measurable age reached to about 40,000 years. And the practicality of counting system has been verified by the analysis of shell and peat samples.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.68-72
• /
• 2004

The integrated voltage-controlled-oscillator(VOC) operating at 1.75 ㎓ is designed using the InGaP/GaAs HBT process. The proposed noise removal circuit and FR-4 substrate structure in this letter show the better characteristic of the phase noise and reduce the size of the VCO. The frequency tuning range of the VCO is about 200 ㎒ and the phase noise at 120 ㎑ offset is -119.3 ㏈c/㎐. The power consumption of the VCO core is 11.2 ㎽ at 2.8 V supply voltage and the output power is -2 ㏈m. The calculated figure of merit(FOM) is 191.7, which shows the best performance compared with the previous FET or HBT VCO.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.4
• /
• pp.193-197
• /
• 2023

Transparent and conducting titanium (Ti) doped indium oxide (TIO) thin films were deposited on the poly-imide (PI) substrate with radio frequency magnetron sputtering and then electron irradiation was conducted on the TIO film's surface to investigate the effect electron irradiation on the crystallization and opto-electrical properties of the films. All x-ray diffraction (XRD) pattern showed two diffraction peaks of the In₂O₂ (431) and (444) planes with regardless of the electron beam irradiation energy. In the AFM analysis, the surface roughness of as deposited films was 3.29 nm, while the films electron irradiated at 700 eV, show a lower RMS roughness of 2.62 nm. In this study, the FOM of as deposited TIO films is 6.82 × 10^-3 Ω^-1, while the films electron irradiated at 500 eV show the higher FOM value of 1.0 × 10^-2 Ω^-1. Thus, it is concluded that the post-deposition electron beam irradiation at 500 eV is the one of effective methods of crystallization and enhancement of opto-electrical performance of TIO thin film deposited on the PI substrate.

• Journal of radiological science and technology
• /
• v.44 no.2
• /
• pp.101-107
• /
• 2021

The purpose of this study was to evaluate optimal CT scan parameters to minimize patient dose to the irradiation and maintain satisfactory image quality in low-dose chest computed tomography (CT) scans. In a chest anthropomorphic phantom, chest CT scans were performed at different kVp and mA within reference of 3.4mGy in volume CT Dose Index (CTDI_vol). The following quantitative parameters had been statistically evaluated: image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and figure of merit (FOM). Nine radiographers conducted the blind test to select the optimal kVp-mA combination. Results indicated that the kVp-mA combination of 80kVp-90mA, 100kVp-50mA, 120kVp-30mA and 140kVp-30mA were obtained high SNR and CNR. The 120kVp-30mA combination offered good compromise in the FOM, which showed the quality and dose performance. In the blind test, an image of 80kVp-90mA obtained a high score with 4.7 points, and 120kVp-10mA or 140kVp-10mA with a low tube current were observed severe noise and poor image quality, thus resulting in decreased diagnostic accuracy. On the other hand, in the combination of high kVp and high mA(140kVp-90mA), the image quality was improved, but the radiation dose was also increased. the FOM value of 140kVp-90mA was lower than 120kVp-30mA. The application of appropriate scan parameters in low-dose chest CT scans produced satisfactory results in dose and image quality for the accuracy of the clinical diagnosis.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.381-388
• /
• 2003

This paper presents a method of giving weights to garbage class clustering and Filler model to improve performance of keyword spotting system and a time-saving method of dialogue speech processing system for keyword spotting by calculating keyword transition probability through speech analysis of task domain users. The point of the method is grouping phonemes with phonetic similarities, which is effective in sensing similar phoneme groups rather than individual phonemes, and the paper aims to suggest five groups of phonemes obtained from the analysis of speech sentences in use in Korean morphology and in stock-trading speech processing system. Besides, task-subject Filler model weights are added to the phoneme groups, and keyword transition probability included in consecutive speech sentences is calculated and applied to the system in order to save time for system processing. To evaluate performance of the suggested system, corpus of 4,970 sentences was built to be used in task domains and a test was conducted with subjects of five people in their twenties and thirties. As a result, FOM with the weights on proposed five phoneme groups accounts for 85%, which has better performance than seven phoneme groups of Yapanel [1] with 88.5% and a little bit poorer performance than LVCSR with 89.8%. Even in calculation time, FOM reaches 0.70 seconds than 0.72 of seven phoneme groups. Lastly, it is also confirmed in a time-saving test that time is saved by 0.04 to 0.07 seconds when keyword transition probability is applied.

• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.81-88
• /
• 2012

In the M&S filed, The Battle Lab is available for acquisition, design, development tool, validation test, and training in the weapon system of development process. Recently, the Battle Lab in the military of Korea is still in an early stage, in spite of importance of battle lab construction. In the environment of network centric warfare, a practical use of the M&S which is connecting live, virtual and constructive model can be applied to all field of System Engineering process. It is necessary thar the Battle Lab is not restricted by time and space, and is possible for the technical implementation. In this paper, to guarantee the interoperability of live and virtual simulation, virtual simulators connect live simulators by using the tactical data link. To guarantee the interoperability of virtual and constructive simulation, both virtual simulators and constructive simulators use the RTI which is the standard tool of M&S. We propose the System that constructed the Air Defence Battle Lab. In case of the approach of target tracks, The Air Defence Battle Lab is the system for the engagement based on a command of an upper system in the engagement weapon system. Constructive simulators which are target track, missile, radar, and launcher simulator connect virtual simulators which are MCRC, battalion, and fire control center simulators using the RPR-FOM 1.0 that is a kind of RTI FOM. The interoperability of virtual simulators and live simulators can be guaranteed by the connection of the tactical data links which are Link-11B and ATDL-1.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.797-806
• /
• 2005

The objective of the In-h(High Level Architecture) have recommended by DoD(Department of Defense) is to facilitate interoperability among simulations and to promote reuse of their components. There are many legacy simulation softwares developed before the HLA becomes simulation standard. The integration of legacy simulations into federations using the HLA is an important research topic in M&S(Modeling and Simulation) area. Legacy simulation softwares of the mission critical industry such as nuclear and aerospace are generally use Fortran language. However, the reuse of those is not easy because the HLA is not support Fortran language. This paper suggests a integration method which minimizes the modification of legacy simulation software and migrates the legacy simulation software to HLA federation. Each federate participating in federation have the separated executables that communicate via a shared memory created at run-time. Two types of shared memory blocks are used for publication and subscription. Declaration block for global variables used in legacy simulation software is separated for publication and subscription and then mapped as classes of objects and interactions for the HLA FOM design. To validate the suggested method, we approached the HLA integration of legacy nuclear simulation code being used in plant design and to observe the integration results, we used the FMT(Federation Management Tool). The diagnostic information which the FTM displays showed that our method can be successfully and effectively used for a HLA federation.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.464-466
• /
• 2003

In this paper an advanced algorithm for selecting a seam line automatically, which used to be selected by human operator for mosaicked images is presented. In addition to four factors proposed by automation theory, the FOM(Figure Of Merit) of tie point were taken into account to suggest the method to select a seam line applicatively and the algorithm was applied to mosaic test images.