• Journal of Oral Medicine and Pain
• /
• 제30권2호
• /
• pp.269-276
• /
• 2005

재래의 고속핸드피스 bur를 이용한 와동 형성시 레진 접착력과 레이저를 사용한 와동형성시 접착력을 비교하여 레이저의 임상적용 여부를 평가하는 것이 본 연구의 목적이다. 총 96개 치아 표본의 법랑질 협면과 상아질 mid-coronal 부에 Er:YAG laser를 사용하여 조사하였다. 사전에 산부식을 시킨 군(48개)과 부식시키지 않은 군(48개)으로 구별하고 각각 flowable 접착시스템(Metafil Flo)과 자가중합 시스템(Clearfil FII New Bond)를 레진에 접착시켰다. 37$^{\circ}C$ 증류수에서 24시간동안 보관한 후 미세 결합강도(micro-tensile shear strength)를 만능시험기(universal testing machine)로 측정하여 다음과 같은 결과를 얻었다. 1. 법랑질과 상아질 모두 산부식 전처리를 한 경우에 산처리를 하지 않은 경우보다 결합강도가 높았고, 레이저 처리 표본에서도 마찬가지여서 레이저만으로 처리하는 것보다는 산부식 처리를 하는 것이 강도면에서 유리한 것으로 나타났다. 2. 법랑질의 경우 레이저 처치한 경우가 bur로 삭제한 경우보다 두 레진군 모두에서 결합강도가 낮았으나(P<0.05), 상아질의 경우에는 flowable 레진군에서는 두 군 간의 차이가 없었다. 3. 레이저 처치군내에서 상아질의 경우, 광중합 flowable 레진의 결합강도가 자가중합형 레진의 강도보다 높았으나, 법랑질에서는 차이가 없었다. 따라서 레이저를 활용하여 와동을 형성하는 것은 상아질까지 확대된 와동의 경우에 법랑질에 국한된 경우보다 결합강도면에서 유리하며, flowable레진을 사용하는 것이 자가중합형 레진보다 유리한 것으로 판단되었다.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.316-325
• /
• 2001

The purpose of this study was to evaluate the effect of adhesive curing timing on the direction of polymerization shrinkage of light-curing composite resin. In this study, the curing times of adhesive and composite resin were measured by differential scanning calorimeter(DSC). 28 extracted human molars were embedded in clear resin and box-type cavities were prepared. Based on DSC data, the experimental teeth were divided into 4 groups. Group 1: no bond; Group 2: late curing; Group 3: Intermediate curing; Group 4: Early curing. After treating with adhesive, the buccal cavities were filled with Z-100 hybrid composite resin and the lingual ones were filled with AEliteflo flowable composite resin. The depressions at the surface were measured by surface profilometer, then the specimens were embedded in clear resin and sectioned. Impressions were obtained and used to get epoxy resin replicas. The epoxy replicas were gold-coated and observed under SEM. Average Maximum Gap(AMG), Gap Proportion(GP), Average Marginal Index(AMI) were used to compare the shrinkage gap of each group. The results were statistically analyzed using the Kruskal-Wallis One Way ANOVA, Student-Newman-Keuls method. The results of this study were as follows. 1. Average Maximum Gap, Gap Proportion, Average Marginal Index and depression at the surface or Z-100 hybride composite resin were smaller than those of AEliteflo flowable composite resin(P<0.05). 2. When the bonding between composite resin and tooth structure was strong, the shrinkage gap was small, and depression at the surface was deep(P<0.05). 3. In the well-bonded group, light-curing composite resin shrank toward bonded cavity wall, not toward light source. The result suggested that the direction of polymerization shrinkage was affected by the quality of bonding in the dentin-resin interface. The strong was the bonding between composite resin and tooth structure, the smaller was the gap and the deeper was the depression at the surface. Then the flow to compensate the polymerization shrinkage proceeded from surface to bonded cavity wall.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• 대한치과교정학회지
• /
• 제35권4호
• /
• pp.295-301
• /
• 2005

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.1-9
• /
• 2006

Purpose: The purpose of this study was to evaluate the efficacy and substitute possibility of a newly developed flowable composite resins as a luting cement for translucent fiber post. Material & Method: Two kinds of 12 mm translucent fiber Post (D.T. Light-Post (Bisco, USA) and FRC Postec (Ivoclar vivadent, Liechtenstein) was inserted into the teflon mold (7 mm diameter, 9 mm long) and Filtek-Flow (3M ESPE. USA), a light activated flowable composite resin, was polymerized for 60 seconds through the post. Also, the post was cut from the tip to 9 mm, 6 mm, 3 mm, and Filtek-Flow was light cured according to each length. For comparison, 60 seconds light-cured and 24 hours self-cured two dual cured resin cement (Duo-cement (Bisco, USA) and 2 Panavia-F (Kuraray, Japan)) samples were prepared as control group. Also cavities (1 mm in width, 1 mm in depth and 12 mm in length) were prepared using acrylic plate and aluminum bar, and flowable composite resin was flied and light cured by the diffused light from the fiber post's side wall. The degree of polymerization was measured according to the distance from curing light using Vickers' hardness test. Result: Within the limitation of this study, the following conclusions were drawn: 1. Vickers' hardness of light cured dual cured resin cement and flowable composite resin decreased from Panavia-F, Filtek-Flow and Duo-cement accordingly (p<0.05). In the dual curing resin cement, light curing performed group showed higher surface hardness value than self cured only group (p<0.05). 2. Surface hardness ratio (light cured through fiber post /directly light cured) of D.T. Light-Post using Filtek-Flow showed about 70% in the 6 mm deep and about 50% in the 12 mm deep FRC Postec showed only 40% of surface hardness ratio. 3. Surface hardness ratio by diffused light from the post's side wall showed about 50% at 6 mm and 9 mm deep, and about 40% at 12 mm deep in D.T. Light-Post. However, FRC Postec showed about 40% at 6 mm deep, and almost no polymerization in 9 mm and 12 mm deep.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.585.1-585
• /
• 2001

The use of flowable composite resins as liners in class II packable composite resins has been suggested by some manufacturers. However, the contributions of this technique are unproven. Objectives: The aim of this study was to compare the gingival microleakage in class II packable composite restorations with or without the use of flowable composite resins as liners.. Method: Slot cavities were prepared on both proximals of 80 extracted human molars and randomly assigned to 8 groups of 20 each.(중략)

• 대한소아치과학회지
• /
• 제50권4호
• /
• pp.434-442
• /
• 2023

This study was aimed to evaluate the bonding performance of a self-adhesive giomer and compare it to a conventional flowable composite resin with regard to shear bond strength and microleakage in enamel and dentin. Healthy human premolars extracted for orthodontic treatments were used in the study. For shear bond strength tests, enamel and dentin specimens were prepared for the study group with self-adhesive giomer and for the control group with conventional flowable composite resin with a 5th-generation adhesive system. A universal testing machine was used to measure the shear bond strength. For the microleakage tests, specimens were immersed in a 2% methylene blue solution for 24 hours, cut into sections, and evaluated with a stereomicroscope for the extent of dye penetration. The results of the study showed no statistically significant difference in shear bond strength between the self-adhesive giomer and the conventional flowable composite resin in enamel (p = 0.091). On the contrary, in dentin, the self-adhesive giomer showed significantly lower shear bond strength (p < 0.0001). The microleakage of the self-adhesive giomer was significantly higher than that of the conventional flowable composite resin (p = 0.002). Self-adhesive giomer is considered useful for restoring small cavities at the enamel level of pediatric patients by reducing chair time with the advantage of a simple bonding process. However, as the study was conducted in a laboratory setting, further research in a clinical environment is deemed necessary.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.359-370
• /
• 2000

The purpose of this investigation was to observe the viscoelastic properties of five commercial flowable(Aeliteflo, Flow it, Revolution, Tetric flow, Compoglass flow), three conventional hybrid(Z-100, Z-250, P-60) and two condensable(Synergy compact, SureFil) resin composites. A dynamic oscillatory shear test was done to evaluate the storage shear modulus (G'), loss shear modulus(G"), loss tangent(tan ${\delta}$) and complex viscosity(${\eta}^*$) of the resin composites as a function of frequency - dynamic frequency sweep test from 0.01 to 100 rad/s at $25^{\circ}C$ - by using Advanced Rheometric Expansion System(ARES). To investigate the effect on the viscosity of resin composites of filler volume fraction, the filler weight % and volume % were measured by means of Archimedes' principle using a pyknometer. The results were as follows 1. The complex viscosity ${\eta}^*$ of flowable resins was lower than that of hybrid resins and significant differences were observed between brands. The complex viscosity ${\eta}^*$ of condensable resins was higher than that of hybrid resins. The order of complex viscosity ${\eta}^*$ at ${\omega}$=10 rad/s was as follows, Surefil, Synergy compact, P-60, Z-250, Z-100, Aeliteflo, Tetric flow, Compoglass flow, Flow it, Revolution. The relative complex viscosity of flowable resins compared to Z-100 was 0.04~0.56 but Surefil was 30.4 times higher than that of Z-100. 2. The storage shear modulus G' and the loss shear modulus G" of flowable resins were lower than those of hybrid resins but those of condensable resins were higher. The patterns of the change of loss tangent, tan ${\delta}$, of resin composites with increasing frequency were significantly different between brands. The phase angles, ${\delta}$, ranged from $30.2{\sim}78.1^{\circ}$ at ${\omega}$=10 rad/s. 3. All composite resins represent pseudoplastic nature with increasing shear rate. 4. The complex shear modulus $G^*$ and the phase angle ${\delta}$ was represented by the frequency domain phasor form, $G^*({\omega})=G^*e^{i{\delta}}=G^*{\angle}{\delta}$. The locus of frequency domain phasor plots in a complex plane was a valuable method that represent the viscoelastic properties of composite resins. 5. There was no direct linear correlationship but a weak positive relation was observed between filler volume % or weight % and the viscosity of the resin composites.

• Restorative Dentistry and Endodontics
• /
• 제30권5호
• /
• pp.363-371
• /
• 2005

본 연구는 2급 복합레진 수복 시 다양한 두께의 유동성 레진 이장이 법랑질 또는 상아질 치은측 변연부의 미세누출에 미치는 영향을 평가하기 위하여 시행하였다. 발거된 상, 하악 대구치의 근심 또는 원심면에 2급 와동을 형성하고 혼성복합레진만으로 충전한 군 (대조군)과 유동성 레진을 치은측에 0.5 mm (실험 1군), 1 mm (실험 2군), 2 mm (실험 3군) 두께로 이장한 후 복합레진을 충전한 군으로 분류하였다. 각 군은 $5^{\circ}$와 $55^{\circ}C$에서 500회 열순환을 시행한 후 $2\%$ methylene blue에 24시간 동안 침적시켜 광학 입체현미경하에서 변연부의 색소 침투를 관찰하였다. 본 연구의 결과 유동성 레진의 다양한 두께는 복합레진 수복물의 변연부 미세누출에 영향을 미쳤다. 복합레진을 이용한 구치부 2급 와동 수복 시 법랑질 또는 상아질 변연에서 0.5 mm두께로 유동성 레진을 적용하는 것이 미세누출 감소에 효과적인 것으로 나타났다.

• 대한소아치과학회지
• /
• 제29권2호
• /
• pp.255-261
• /
• 2002

유동성 복합레진은 치면 열구 전색이나 작은 교합면 우식의 예방적 레진 수복 및 깊은 와동의 이장재로 사용할 수 있으나 이에 대한 임상적 연구는 부족한 실정이다. 본 연구는 유동성 복합레진이 치면 열구 전색, 예방적 레진 수복, 깊은 와동의 이장의 세 가지 임상적 용도로 적용될 경우, 기존의 재료와 비교한 대체가능성과 타당성을 검토할 목적으로, 각 용도에서의 양재료들이 나타내는 미세누출 양상을 비교분석하였다. 교합면이 건전한 120개의 발거된 대구치를 6개의 군으로 나누어 각 군당 20개색 시편을 구성하였다. 제 1군과 2군에는 각각 Concise와 Tetric flow로 치면 열구 전색을, 제 3군에는 Z-100과 Concise, 제 4군에는 Tetric flow로 예방적 레진 수복을 시행하였으며, 제 5군에는 Vitrebond, 제 6군에는 Tetric flow를 이장재로 이용하여 sandwich technique 수복을 시행하였다. 100회의 열 순환 및 색소 침투후 색소 침투 정도를 관찰하고 미세누출 정도를 판단하여 비교, 분석한 결과 다음과 같은 결론을 얻었다. 1. 열구 전색재인 Concise와 유동성 복합레진인 Tetric flow로 각각 치면 열구 전색을 시행한 경우 미세누출의 차이가 나타나지 않았다(p>0.05). 2. 복합레진인 Z-100과 열구전색재인 Concise로 예방적 레진 수복을 시행한 군과 유동성 복합레진인 Tetric flow 단일 재료로 수복한 군 간에도 미세누출의 차이는 없었다(p>0.05). 3. 이장재로 Resin-modified glass ionomer cement 인 Vitrebond와 유동성 복합레진인 Tetric flow를 사용하여 sandwich technique으로 복합레진 수복을 시행한 경우에도 양 군간에 미세누출의 차이는 나타나지 않았다(p>0.05).