• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.311-311
• /
• 2008

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.7
• /
• pp.580-583
• /
• 2009

This paper introduces a gate drive IC for power modules with shoot-through immunity. A new approach uses a bootstrap diode as a high-side voltage bias and a level shift function at the same time. Therefore, the gate drive circuit becomes a simple and low-cost without conventional level shift functions such as HVIC(High-Voltage IC), optocoupler and transformer. The proposed gate drive IC is designed and fabricated using the Dongbu-Hitek's 0.35um BD350BA process. It has been tested and verified with IGBT modules.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.81-82
• /
• 2009

This paper introduces a gate drive IC for power modules with shoot-through immunity. A new approach uses a bootstrap diode as a high-side voltage bias and a level shift function at the same time. Therefore, the gate drive circuit becomes a simple and low-cost without conventional level shift functions such as HVIC(High-Voltage IC), optocoupler and transformer. The proposed gate drive IC is designed and fabricated using the Dongbu-Hitek's 0.35um BD350BA process. It has been tested and verified with IGBT modules.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.99-101
• /
• 2005

A gate driver with Boot-strap chain is proposed to drive Multi-level PDP sustain switches. The proposed gate driver uses only one boot-strap capacitor and one diode per each MOSFETs switch without floating power supply. By adoption of this gate driver circuits, the size, weight and the cost of the drivel board can be reduced.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.232-235
• /
• 1999

In this paper, we present a coprocessor that can operate with ARM microprocessors. The coprocessor supports IEEE 754 standard single- and double-precision binary floating point arithmetic operations. The design objective is to achieve minimum-area, low-power and acceleration of processing power of ARM microprocessors. The instruction set is compatible with ARM7500FE. The coprocessor is written in verilog HDL and synthesized by the SYNOPSYS Design Compiler. The gate count is 38,115 and critical path delay is 9.52ns.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.20.1-20.1
• /
• 2011

The nano-sized quantum structure has been an attractive candidate for investigations of the fundamental physical properties and potential applications of next-generation electronic devices. Metal nano-particles form deep quantum wells between control and tunnel oxides due to a difference in work functions. The charge storage capacity of nanoparticles has led to their use in the development of nano-floating gate memory (NFGM) devices. When compared with conventional floating gate memory devices, NFGM devices offer a number of advantages that have attracted a great deal of attention: a greater inherent scalability, better endurance, a faster write/erase speed, and more processes that are compatible with conventional silicon processes. To improve the performance of NFGM, metal nanocrystals such as Au, Ag, Ni Pt, and W have been proposed due to superior density, a strong coupling with the conduction channel, a wide range of work function selectivity, and a small energy perturbation. In the present study, bismuth metal nanocrystals were self-assembled within high-k $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMN) films grown at room temperature in Ar ambient via radio-frequency magnetron sputtering. The work function of the bismuth metal nanocrystals (4.34 eV) was important for nanocrystal-based nonvolatile memory (NVM) applications. If transparent NFGM devices can be integrated with transparent solar cells, non-volatile memory fields will open a new platform for flexible electron devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1227-1234
• /
• 2013

An analog array with a 1.2 double poly floating gate transistor has been developed with a standard CMOS fabrication process. The programming of each cell by means of an efficient control circuit eliminates the unnecessary erasing operation which has been widely used in conventional analog memories. It is seen that the path of the signal for both the programming and the reading is almost exactly the same since just one comparator supports both operations. It helps to eliminate the effects of the amplifier input-offset voltage problem on the output voltage for the read operation. In the array, there is no pass transistor isolating a cell of interest from the adjacent cells in the array. Instead of the extra transistors, one extra bias voltage, Vmid, is employed. The experimental results from the memory shows that the resolution of the memory is equivalent to the information content of at least six digital cells. Programming/erasing of each cell is achieved with no detectable disturbance of adjacent cells. Finally, the unique shape of the injector structure in a EEPROM is adopted as a cell of analog array. It reduces the programming voltage below the transistor breakdown voltage without any special fabrication process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.21-26
• /
• 2008

We fabricated nano-particles of ZnO, $In_2O_3$ and $SnO_2$ by using the chemical reaction between metal thin films and polyamic acid. The average size and density of these ZnO, $In_2O_3$ and $SnO_2$ nano-particles was approximately 10, 7, and 15 nm, and $2{\times}10^{11},\;6{\times}10^{11},\;2.4{\times}10^{11}cm^{-2}$, respectively. Then, we fabricated nano-floating gate memory (NFGM) devices with ZnO and $In_2O_3$ nano-particles embedded in the devices' polyimide dielectrics and silicon dioxide layers as control and tunnel oxides, respectively. We measured the current-voltage characteristics, endurance properties and retention times of the memory devices using a semiconductor parameter analyzer. In the $In_2O_3$ NFGM, the threshold voltage shift (${\Delta}V_T$) was approximately 5 V at the initial state of programming and erasing operations. However, the memory window rapidly decreased after 1000 s from 5 to 1.5 V. The ${\Delta}V_T$ of the NFGM containing ZnO was approximately 2 V at the initial state, but the memory window decreased after 1000 s from 2 to 0.4 V. These results mean that metal-oxide nano-particles have feasibility to apply NFGM devices.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.354-361
• /
• 2012

The organic memory device was made by the plasma polymerization method which was not the dry process but the wet process. The memory device consist of the styrene and MMA monomer as the insulating layer, MMA monomer as the tunneling layer and Au thin film as the memory layer which was fabricated by thermal evaporation method. The I-V characteristics of fabricated memory device got the hysteresis voltage of 27 V at 40/-40 V double sweep measuring conditions. At this time, the optimized structure was 7 nm of Au thin film as floating gate, 400 nm of styrene thin film as insulating layer and 30 nm of MMA thin film as tunneling layer. Therefore we got the charge trapping characteristics by the hysteresis voltage. From the paper, styrene indicated a good charge trapping characteristics better than MMA. In the future, we expect to make devices by using styrene thin film rather than Au thin film.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.148-148
• /
• 2010

플래시 메모리로 대표되는 비휘발성 메모리는 IT 기술의 발달에 힘입어 급격한 성장세를 나타내고 있지만, 메모리 소자의 크기가 작아짐에 따라서 그 물리적 한계에 이르러 차세대 메모리에 대한 요구가 점차 높아지고 있는 실정이다. 따라서, 이러한 문제점에 대한 대안으로서 고속 동작 및 정보의 저장 시간을 향상 시킬 수 있는 nano-floating gate memory (NFGM)가 제안되었다. Nano-floating gate에서 사용되는 nanocrystal (NCs) 중에서 Si nanocrystal은 비휘발성 메모리뿐만 아니라 발광 소자 및 태양 전지 등의 매우 다양한 분야에 광범위하게 응용되고 있지만, NCs의 크기와 밀도를 제어하는 것이 가장 중요한 문제로 이를 해결하기 위해서 많은 연구가 진행되고 있다. 또한, 소자의 소형화가 이루어지면서 기존의 플래시 메모리 한계를 극복하기 위해서 터널베리어에 관한 관심이 크게 증가했다. 특히, 최근에 많은 주목을 받고 있는 개량형 터널베리어는 크게 VARIOT (VARIable Oxide Thickness) barrier와 CRESTED barrier의 두 가지 종류가 제안되어 있다. VARIOT의 경우에는 매우 얇은 두께의low-k/high-k/low-k 의 적층구조를 가지며, CRESTED barrier의 경우에는 반대의 적층구조를 가진다. 이와 같은 개량형 터널 베리어는 전계에 대한 터널링 전류의 감도를 증가시켜서 쓰기/지우기 특성을 향상시키며, 물리적인 절연막 두께의 증가로 인해 데이터 보존 시간의 향상을 달성할 수 있다. 본 연구에서는 박막의 $SiO_2$와 $Si_3N_4$를 적층한 VARIOT 타입의 개량형 터널 절연막 위에 전하 축적층으로 $SiN_x$층의 내부에 Si-NCs를 갖는 비휘발성 메모리 소자를 제작하였다. Si-NCs를 갖지 않는 $SiN_x$전하 축적층은 Si-NCs를 갖는 전하 축적층보다 더 작은 메모리 윈도우와 열화된 데이터 보존 특성을 나타내었다. 또한, Si-NCs의 크기가 감소됨에 따라 양자 구속 효과가 증가되어 느린 지우기 속도를 보였으나, 데이터 보존 특성이 크게 향상됨을 알 수 있었다. 그러므로, NFGM의 빠른 쓰기/지우기 속도와 데이터 보존 특성을 동시에 만족하기 위해서는 Si-NCs의 크기 조절이 매우 중요하며, NCs크기의 최적화를 통하여 고집적/고성능의 차세대 비휘발성 메모리에 적용될 수 있을 것이라 판단된다.