• Title/Summary/Keyword: Flash Over

Search Result 188, Processing Time 0.027 seconds

A Study on the Structural Fire Resistance Performance Design of RC Structural according to the Explosive Spalling - A Case Study on the Evaluation Method of Structural Fire Resistance in Japan - (폭렬 현상을 고려한 RC 구조물의 PBD기반 구조내화설계 기술개발에 관한 연구(III) -일본의 내화안전성평가기법을 활용한 사례조사 연구-)

  • Kim, Se-Jong;Lee, Jae-Young;Kwon, Young-Jin
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2008.11a
    • /
    • pp.310-315
    • /
    • 2008
  • The objective of design for a post flash-over fire is contain the fire and prevent structural collapse, as necessary to meet the performance requirements. In the post flash-over phase of a fire all of the combustible objects in the compartment are burning and the heat release rate is limited either by the fuel surface area or the available air supply. So for the PBD situations, the process of evaluation method for fire phenomena is very important. It is the aim of this study to investigate and analyze the evaluation method of structural fire resistance in Japan.

  • PDF

An Experimental Research on the Features of Interior Materials under High Temperature - Focusing on Gypsum Boards - (온도 상승에 따른 내부 조직 특성에 관한 실험적 연구 -석고보드를 중심으로-)

  • 김광기;박선길;김우재;임남기;송병창;정상진
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2003.05a
    • /
    • pp.305-310
    • /
    • 2003
  • Recently, gypsum boards are widely used as interior finishing boards for constructions because of their features of absorbing heats and little temperature rising at the early stage of fire. Therefore, in this research, basic data were suggested to secure fireproof stability by investigating interior processing features, which change together with the backside temperature of test materials from Flash Over (within 30 minutes after firing), at which temperature reaches its highest point, to survey the features of materials due to rising temperature in the chase of gypsum boards (general and fireproof gypsum boards)

  • PDF

The Charateristics of Flash-over Voltage by Humidity Variation for 22.9 kV Live Part (22.9 kV 노출충전부의 습도변화에 따른 섬락전압 변동 특성)

  • Han, Ki-Boong;Lee, Dae-Jong;Han, Woon-Ki
    • Proceedings of the KIEE Conference
    • /
    • 2002.07c
    • /
    • pp.1856-1858
    • /
    • 2002
  • As the statistical data, the most of electrical shock accidents have been caused by human errors including those of mistake, carelessness, and so on during normal condition. But, there are currently no international standards for the determination of withstand distance to ensure safety of personnel form 22.9 kV electrical power facilities during their normal operation. Therefore, this paper describes the characteristics of flash-over voltage by moisture variation to establish the distance clearances in terms of electrical safety.

  • PDF

Design of High-capacity NAND Flash File System supporting Sensor Data Collection (센서 데이터 수집을 위한 대용량 NAND 플래시 파일 시스템의 설계)

  • Han, Kyoung-Hoon;Lee, Ki-Hyeok;Han, Hyung-Jin;Han, Ji-Yean;Sohn, Ki-Rack
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.15 no.7
    • /
    • pp.515-519
    • /
    • 2009
  • As the application fields of sensor nodes are getting diverse these days, it is required to have a way of collecting various data that is suitable for these application fields. In the case that the real-time surveillance over the data is unnecessary, present data collecting methods, which collect and transfer the data directly, can cause a waste of energy and data loss, A new method that store the collected data in a local storage and acquire them by query later on is required for nonreal-time applications. NAND flash has energy efficiency and large capacity so it is suitable for sensor nodes, Sensor nodes support 4-10 KBytes small sized memory and it is hard to build an effective file system since NAND Flash doesn't support overwriting NAND flash. This paper discusses an implementation of NAND Flash file system in sensor node environments. The file system makes long-term data collecting possible by reducing transmission cost. It is expected that this file system will play a central role in sensor network environments as it can be applied to various fields which call for long term data collecting.

A Study on the Corner Effect of Fin-type SONOS Flash Memory Using TCAD Simulation (TCAD 시뮬레이션을 이용한 Fin형 SONOS Flash Memory의 모서리 효과에 관한 연구)

  • Yang, Seung-Dong;Oh, Jae-Sub;Yun, Ho-Jin;Jeong, Kwang-Seok;Kim, Yu-Mi;Lee, Sang-Youl;Lee, Hee-Deok;Lee, Ga-Won
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.25 no.2
    • /
    • pp.100-104
    • /
    • 2012
  • Fin-type SONOS (silicon-oxide-nitride-oxide-silicon) flash memory has emerged as novel devices having superior controls over short channel effects(SCE) than the conventional SONOS flash memory devices. However despite these advantages, these also exhibit undesirable characteristics such as corner effect. Usually, the corner effect deteriorates the performance by increasing the leakage current. In this paper, the corner effect of fin-type SONOS flash memory devices is investigate by 3D Process and device simulation and their electrical characteristics are compared to conventional SONOS devices. The corner effect has been observed in fin-type SONOS device. The reason why the memory characteristic in fin-type SONOS flash memory device is not improved, might be due to existing undesirable effect such as corner effect as well as the mutual interference of electric field in the fin-type structure as reported previously.

New Flash Memory Management Method for Reliable Flash Storage Systems (신뢰성 있는 플래시메모리 저장시스템 구축을 위한 플래시메모리 저장 공간 관리 방법)

  • Kim, Han-Joon;Lee, Sang-Goo
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.27 no.6
    • /
    • pp.567-582
    • /
    • 2000
  • We propose a new way of managing flash memory space for flash memory-specific file system based on log-structured file system. Flash memory has attractive features such as non-volatility, and fast I/O speed, but it also suffers from inability to update in place and limited usage cycles. These drawbacks require many changes to conventional storage (file) management techniques. Our focus is on lowering cleaning cost and evenly utilizing flash memory cells while maintaining a balance between the two often-conflicting goals. The proposed cleaning method performs well especially when storage utilization and the degree of locality are high. The cleaning efficiency is enhanced by dynamically separating cold data and non-cold data. The second goal, cycle-leveling is achieved to the degree where the maximum difference between erase cycles is below the error range of the hardware. Simulation results show that the proposed method has significant benefit over naxve methods: maximum of 35% reduction in cleaning cost with even spreading writes across segments.

  • PDF

Design and Manufacturing a Synchronous Fash of LED Marine Lantern based on GPS-based (GPS기반 동기점멸방식의 해상용 LED등명기의 설계 및 제작)

  • Byun, Gi-Sig;Kim, Gwan-Hyung;Kim, Min;Kim, Chun-Ho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.5
    • /
    • pp.885-891
    • /
    • 2012
  • The synchronous flash of a marine lantern, differentiated from the flash pattern of other risk indicators, supports the safe sailing of vessels. General marine lanterns flash according to the flash protocol through sensing the day and the night. Thus, there can be time error over time and the marine lantern does not synchronously flash as a whole. To resolve this problem, this study designed LED marine lantern based on constant-current system using synchronous flash technique enabling all marine lanterns to keep its time based on GPS satellite time. Also we suggested a radiation method with an effective heat emission performance in the restricted and closed space of a marine lantern.

High Density and Low Voltage Programmable Scaled SONOS Nonvolatile Memory for the Byte and Flash-Erased Type EEPROMs (플래시 및 바이트 소거형 EEPROM을 위한 고집적 저전압 Scaled SONOS 비휘발성 기억소자)

  • 김병철;서광열
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.15 no.10
    • /
    • pp.831-837
    • /
    • 2002
  • Scaled SONOS transistors have been fabricated by 0.35$\mu\textrm{m}$ CMOS standard logic process. The thickness of stacked ONO(blocking oxide, memory nitride, tunnel oxide) gate insulators measured by TEM are 2.5 nm, 4.0 nm and 2.4 nm, respectively. The SONOS memories have shown low programming voltages of ${\pm}$8.5 V and long-term retention of 10-year Even after 2 ${\times}$ 10$\^$5/ program/erase cycles, the leakage current of unselected transistor in the erased state was low enough that there was no error in read operation and we could distinguish the programmed state from the erased states precisely The tight distribution of the threshold voltages in the programmed and the erased states could remove complex verifying process caused by over-erase in floating gate flash memory, which is one of the main advantages of the charge-trap type devices. A single power supply operation of 3 V and a high endurance of 1${\times}$10$\^$6/ cycles can be realized by the programming method for a flash-erased type EEPROM.

Two Case Reports of the Menopausal Disorder with Hot Flashes Treated with Hoechunboeum-tang (회춘보음탕(回春補陰湯) 투여로 호전된 열성홍조를 동반한 폐경기 장애 치험 2례)

  • Kim, Soon-il;Lee, Sang-hun
    • The Journal of Internal Korean Medicine
    • /
    • v.38 no.5
    • /
    • pp.576-582
    • /
    • 2017
  • Objectives: Hormone replacement therapy may relieve many symptoms of menopause; however, hormone replacement therapy may increase the risk of breast cancer, stroke, and dementia. This case study describes the effect of Hoechunboeum-tang on the menopausal disorder of hot flashes, which has been well documented as a cause of distress to patients undergoing menopause. Methods and Results: Two female patients suffering from severe hot flashes related to menopausal disorders were administered the herbal medicine, Hoechunboeum-tang. Measurements included hot flash frequency over a 24 hour period, hot flash severity (visual analogue scale), and hot flash-related daily interference and were recorded during the last week before herbal medicine and again after 7 and 15 days of herbal treatment. The patients were asked about their hot flash symptoms 6 months later and both reported that the symptoms had been successfully reduced after herbal treatment and were still reduced after 6 months. Conclusions: Hoechunboeum-tang could have a beneficial effect on menopausal disorder with hot flashes.

A Model to Identify Expeditiously During Storm to Enable Effective Responses to Flood Threat

  • Husain, Mohammad;Ali, Arshad
    • International Journal of Computer Science & Network Security
    • /
    • v.21 no.5
    • /
    • pp.23-30
    • /
    • 2021
  • In recent years, hazardous flash flooding has caused deaths and damage to infrastructure in Saudi Arabia. In this paper, our aim is to assess patterns and trends in climate means and extremes affecting flash flood hazards and water resources in Saudi Arabia for the purpose to improve risk assessment for forecast capacity. We would like to examine temperature, precipitation climatology and trend magnitudes at surface stations in Saudi Arabia. Based on the assessment climate patterns maps and trends are accurately used to identify synoptic situations and tele-connections associated with flash flood risk. We also study local and regional changes in hydro-meteorological extremes over recent decades through new applications of statistical methods to weather station data and remote sensing based precipitation products; and develop remote sensing based high-resolution precipitation products that can aid to develop flash flood guidance system for the flood-prone areas. A dataset of extreme events has been developed using the multi-decadal station data, the statistical analysis has been performed to identify tele-connection indices, pressure and sea surface temperature patterns most predictive to heavy rainfall. It has been combined with time trends in extreme value occurrence to improve the potential for predicting and rapidly detecting storms. A methodology and algorithms has been developed for providing a well-calibrated precipitation product that can be used in the early warning systems for elevated risk of floods.