• Journal of the Korean housing association
• /
• v.25 no.2
• /
• pp.121-130
• /
• 2014

This paper provides a social knowledge for pragmatic application guidelines of the interior finish materials within apartment houses, based on both the awareness of practitioners and as it applies to the realities. For this purpose, a series of the questionnaires survey on the awareness of interior finish materials in recently-constructed and remodeled apartment houses was performed, which has extended its probe into the awareness of architectural practitioners. The questionnaires asked practitioners how much they desire sustainable finish materials and the difference in various parties were analyzed and compared, formulating the pragmatic solution in the determination of interior finishes. Comparative analysis of the awareness of construction specialists, interior designer, architectural environmental researchers on environment-friendly finish materials showed that all parties were right to recognize the significance of sustainability in interior finishes. Practitioners believed that occupants must bear the additional expense for the environment-friendly finish products. Also, the results tell that the amount used of environment-friendly products increases as expertise on sustainability in interior finishes rises.

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.70-77
• /
• 2014

The purpose of this study is providing a usage of exterior, interior finish materials and color scheme for architectural design and the actual texture and pattern plans of finish materials from Le Corbuisier's work, Chapel Ronchamp. Chapel Ronchamp was analyzed to support the study for the interaction between texture usage and color expression. As a powerful design tool, texture, pattern and color of finish materials are very effective to alter the perception of the facade in the building. Most of architectural buildings, shapes and materials of elevations are monotonous and uniform. This study should be considered by details in the elevation of Chapel Ronchamp. As the part for developing and planning of architectural design, researching color plans and finish material is very important on real expression in the architectural space. As a result, this study will benefit in planning both the exterior and interior environments of color and finish material with texture and pattern.

• Korean Journal of Metals and Materials
• /
• v.46 no.2
• /
• pp.80-87
• /
• 2008

Many researches related to the reliability of Pb-free solder joints with PCB (printed circuit board) surface finish under thermal or vibration stresses are in progress, because the electronics is operating in hash environment. Therefore, it is necessary to assess Pb-free solder joints life with PCB surface finish under thermal and mechanical stresses. We have investigated 4-points bending fatigue lifetime of Pb-free solder joints with OSP (organic solderability preservative) and ENIG (electroless nickel and immersion gold) surface finish. To predict the bending fatigue life of Sn-3.0Ag-0.5Cu solder joints, we use the test coupons mounted 192 BGA (ball grid array) package to be added the thermal stress by conducting thermal shock test, 500, 1,000, 1,500 and 2,000 cycles, respectively. An 4-point bending test is performed in force controlling mode. It is considered that as a failure when the resistance of daisy-chain circuit of test coupons reaches more than $1,000{\Omega}$. Finally, we obtained the solder joints fatigue life with OSP and ENIG surface finish using by Weibull probability distribution.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.32-41
• /
• 2014

The purpose of this study is providing a systematic method of exterior, interior finish materials and color scheme for elementary school and the actual color plans of elementary schools in Busan was analyzed to support the study. As a powerful design tool, a finish materials and a color are very effective to alter the perception of a building and a view. Most of the school, a shape and a material of elevations are monotonous and uniform and it makes students are hard to attach to their schools. As a place for learning and school life, the inner space of elementary classroom needs to be considered very important. The new basic guideline for developing and planning of architectural design could be achieved by researching a current plan and a finish material in elementary school. As a result, this study will benefit in planning both the exterior and interior environments of color.

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.147-155
• /
• 2011

The purpose of this study is to grope for plan methods through analyzing preferences on expression methods of materials for visual differentiation in hosing space. The results are as follows : First, we could know that finish material is the important element to make differential design in housing space. It is a effective method to use the color and material of finish materials. Second, we could find they preferred woods in materials and Y color, N9.5, bright and light in colors through grasping preference about types in material elements. The preferred texture is soft and the preferred patterns are solid and geometry. Third, it is a good method to mix materials which give us different season feeling, and to mix colors which are different tones to lead the differential design by materials in housing space. In case texture and patterns, what we mix similar things is the effective method. Fourth, preference of the expression method is manifested differently depending on the selected elements. so when we plan the housing, we have to consider that. lastly, I think this study will be a basic data on a study to differentiate the design of the residential space.

• Fire Science and Engineering
• /
• v.12 no.2
• /
• pp.17-28
• /
• 1998

To propose a new fire hazard assessment criteria of interior finish materials, the properties and incident heat flux of interior finish materials in a compartment fires are investigated and compared by using flame spread model developed by Quintiere. The properties considered on which fire growth depend are including flame heat flux and thermal inertia, lateral flame spread parameter, heat of combustion and effective heat flux and thermal inertia, lateral flame spread parameter, heat of combustion and effective heat of gasfication. ISO Room Corner Test(9705) is applied in the model and the time for total energy release rate to reach 1MW is examined. The results are compared for the 24 different materials tested by EUREFIC. Dimensionless parameter a, b and ${\gamma}$b are used to develope a new method in which fire hazard of interior finish materials can be classified resulting from correlation between b and flashover time. Results show that if b greater than about zero, flashover time in the ISO Room-Corner Test is principally proportional to ignition time only.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.47-54
• /
• 2001

Similar patterned fire incidents such as, Inchon Live-Hof Pub Restaurant as, Sea-land Children Resort have proven that serious loss of lives were caused by hazardous gas generated from a combustion of interior finish and decorative materials. Therefore, comparing Korean fire regulation with other countries fire code, e.g. UK, USA, France about limitation of interior finish and decorative materials in premises as assemblies, differences & problems have been int estimated and analyzed on hew serious they may affect on fire spread and smoke development based on analyze facts. It is suggested that Korean fire code would be revised in order to reduce hazardous interior finish materials from special occupancy and adapted new test methods to verify proper fire performance in premises as assembles which require a fire certificate. Finally, detailed code alternatives will be suggested in order to set up effective fire regulation, which could promote preventing serious loss of lives in future.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.157-159
• /
• 2007

It is very important to protect life, property at sea from any fire. Recommendation on improved fire test procedures for surface flammability of bulkhead ceiling and deck finish materials specifies a procedure for measuring fire characterizing their flammability and thus their suitability for use in marine construction. In this paper we investigated the positive expected by fire test procedures for flammability of bulkhead ceiling and deck finish materials. Also, unusual materials were analyzed. Finally, we suggest methods to solve several problems related to unusual materials.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.141-149
• /
• 2013

This paper aims to provide pragmatic application guidelines of the interior finish materials for apartment houses with newly-established evaluation methodology of the sustainable degree of interior products. With reference to the standards and criteria of domestic eco-labeling accreditation schemes for sustainable products in the area of architecture which focus on the sustainable elements classified as the health, recyclability, durability, and energy efficiency, in this study, a systematic evaluation method has been established for interior finish products with quantifiable indicators for sustainable performance. Base on the evaluation system introduced here, most interior finish products can be classified into a database and applied effectively to the realities from the perspective of the sustainability. There are the necessities of enforcement issues with the idea of revising or taking remedial measures of the current performance criteria of domestic eco-labeling accreditation to bolster their reliability. As well as already-commercialized products, hereafter, continued efforts are needed to control the whole process of manufacturing new interior finish products from their designing, constructing, consuming, recycling and to dismantling in terms of sustainability, which promises more pragmatic follow-up measures for the detail embodiment of the environment-friendly spaces.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.750-760
• /
• 2002

In this study, three solders, Sn-37Pb, Sn-3.5Ag, and Sn-3.8Ag-0.7Cu were screen printed on both electroless Ni/Au and OSP metal finished micro-via PCBs (Printed Circuit Boards). The interfacial reaction between PCB metal pad finish materials and solder materials, and its effects on the solder bump joint mechanical reliability were investigated. The lead free solders formed a large amount of intermetallic compounds (IMC) than Sn-37Pb on both electroless Ni/Au and OSP (Organic Solderabilty Preservatives) finished PCBs during solder reflows because of the higher Sn content and higher reflow temperature. For OSP finish, scallop-like $Cu_{6}$ /$Sn_{5}$ and planar $Cu_3$Sn intermetallic compounds (IMC) were formed, and fracture occurred 100% within the solder regardless of reflow numbers and solder materials. Bump shear strength of lead free solders showed higher value than that of Sn-37Pb solder, because lead free solders are usually harder than eutectic Sn-37Pb solder. For Ni/Au finish, polygonal shaped $Ni_3$$Sn_4$ IMC and P-rich Ni layer were formed, and a brittle fracture at the Ni-Sn IMC layer or the interface between Ni-Sn intermetallic and P-rich Ni layer was observed after several reflows. Therefore, bump shear strength values of the Ni/Au finish are relatively lower than those of OSP finish. Especially, spalled IMCs at Sn-3.5Ag interface was observed after several reflow times. And, for the Sn-3.8Ag-0.7Cu solder case, the ternary Sn-Ni-Cu IMCs were observed. As a result, it was found that OSP finished PCB was a better choice for solders on PCB in terms of flip chip mechanical reliability.