• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.4
• /
• pp.57-66
• /
• 1985

This paper deals with an experimental study on a liquid atomization to investigate the break- up mechanism of a liquid film flow which is formed by a high speed air flow in parallel direction and an atomization characteristics of a liquid film flow in order to provide the basic data for the development of the twin fluid atomizer. Authors had built the simplified, transparent new devices which can form a uniform thickness of liquid film and an electrical measuring circuit of the liquid film thickness. By introducing the new devices and the measuring circuit, the time variation of a liquid film thickness the mean diameter of the droplets, the droplet size distribution, the degree of the dispersion and the atomization rate of a liquid film are measured experimentally. As the analysis of the study, it can be said the experimental investigation will fairly contribute for further study in this field of study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.1053-1057
• /
• 1997

Laser thin film process with a Q-switch pulsed YAG laser was performed for micro machining. In this research, we performed basic Cr thin film on glass substrates removal machining experiments. Form experiments, it happens not only evaporration of thin film but also spatter and cohesion of melting substance in working region, when machining a Cr thin film by Q-switch YAG laser beam irradiation. Critical energy of surface irradiation type by irradiation direction of laser in a face composing thin film on the glass is higher than that of back irradiation type, but the latter is favorable because of spatter appearance. In case of image formation position when laser beam is irradiated, the defocus is permitted to a certain extent within forcus depth. Ifexceeds focus depth, formation of pattern is vanishing step by step.

• Advances in nano research
• /
• v.15 no.2
• /
• pp.91-104
• /
• 2023

Development of thin carbon nanotubes (CNTs) nanoliquid film over the rough surface of a horizontal rotating disk is investigated by considering symmetric roughness either along the azimuthal or radial directions. The disk surface is either heated or cooled axisymmetrically from below. The effects of single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs) are analyzed on the film thinning process with different types of base liquids. Closed form solutions for velocity and temperature field are obtained for small values of Reynolds number whereas the numerical solution is derived for moderate values of Reynolds number. It is found that fluid retention / depletion takes place when the roughness is symmetric along the azimuthal / radial directions. It is also seen that the film thinning rate enhances for MWCNTs compare to SWCNTs. Further it is found that two different heat transfer regions exits within the flow domain depending on the fact that heat is transferred from disk to liquid film and vice-versa.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.110-119
• /
• 2019

is a movie about the frustration and the despair of young people in Korean society today. It is different from the previous Lee Chang-dong's film in that it provides the main character's perception and feelings about the world as the ultimate cause of the protagonist's actions. Lee Chang-dong's characters begin to change from . The main character of Burning goes one step further. He seems to believe that the main character's only weapon to overcome the logic and constraints of reality is obsessive and compulsive behaviors. Unlike previous movies, the character in Burning is a person who practices awareness and proves his character through action. I will analyze characters in to suggest the change of film form. Especially I will look at how the character's actions and the writer's own voice can meet and what results it bring about in this movie. It will lead to his changes in film form and an idea on the young people in Korean society today.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.8
• /
• pp.255-266
• /
• 2019

This paper examines the ink on paper technique that is being used in the animation works by the Canadian filmmaker Michēle Cournoyner from the National Film Board of Canada. It also discusses how in her animated film "Soif"(2013) this technique has been applied to compose the narrative significance and symbols through the use of metamorphosis as a form of artistic expression. Cournoyner had used the ink of paper technique as a means to abandon realistic representations of movement, and in "Soif" through expressive use of metamorphosis, portrayed changes of images in character and object not through chronological order of narrative flow, but through the body of the female character, which had been represented by the improvisation of the ink on paper technique in order to express the surrealistic and unconscious state of mind in animation. Also, the use of Surrealist automatism had been incorporated to evoke the film towards a form of abstract and metaphysical expression, which in terms of expression and technique connects with the character in the animation to give emphasis to its relevancy with the subject matter of the work.

• Clean Technology
• /
• v.27 no.3
• /
• pp.217-222
• /
• 2021

Although monolayer black phosphorus (BP) and few-layer BP nanosheets (NSs) have been extensively studied as promising alternatives to graphene, research has focused primarily on atomically thin-layered BP in an isolated form. In order to realize the practical applications of BP-related devices, a BP film based on continuous networking of few-layer BP NSs should be developed. In this study, a transparent BP film with high quality was fabricated via a vacuum filtration method. An oxygen-free water solvent was used as an exfoliation medium to avoid significant oxidation of the few-layer BP NSs in liquid-phase exfoliation. The exfoliation efficiency from bulk BP to the few-layer BP NSs was estimated at 22%, which is highly efficient for the production of continuous BP film. The characteristics of the high-quality BP film were determined as 98% transparency, minimum oxidation of 18%, structural stability, and an appropriate bandgap of about 1.8 eV as a semiconductor layer. In order to demonstrate the potential of the BP film for photocatalytic activity, we performed photoelectrochemical water oxidation of the transparent BP film. Although its performance should be improved for practical applications, the BP film could function as a photoanode, which offers a new potential semiconductor in water oxidation. We believe that if the BP film is adequately engineered with other catalysts the photocatalytic activity of the BP film will be improved.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.2
• /
• pp.241-243
• /
• 2001

• Archives of design research
• /
• v.15 no.4
• /
• pp.253-262
• /
• 2002

Without the involvement of time in animation, it cannot be possible to create movement. Therefore, tine is the important element to create animation. In animation, the expression of the emotion of character is more complicate than the appearance. Time is one of element to use for express of the emotion. It can be divided two types of time as the real time and the animation time broadly. The real time has linear, irreversible and analogue form which is in our daily life. And the animation time has multi-direction, reversible, and digital form which can be detected in the movie. For the animation time, there are many types of time that are the running time, the production time, the subjective time, the objective time, the ambiguous time and the universal time etc. This study is to extend and enrich the express as film language through various types of times in animation. Time is one of important element that can be useful method for expressing many unique scenes in film art as film language.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.619-625
• /
• 1995

Polycrystalline CdTe thin film has been studied for photovoltaic application due to the 1.45 eV band gap energy ideal for solar energy conversion and high absorption coefficient. The formation of low resistance contact to p-CdTe is difficult because of large work function(>5.5eV). Common methods for ohmic contact to p-CdTe are to form a p+ region under the contact by in-diffusion of contact material to reduce the barrier height and modify a p-CdTe surface layer using chemical treatment. In this study, the surface chemical treatment of p CdTe was carried out by H$\_$3/PO$\_$4/+HNO$\_$3/ or K$\_$2/Cr$\_$2/O$\_$7/+H$\_$2/SO$\_$4/ solution to provide a Te-rich surface. And various thin film contact materials such as Cu, Au, and Cu/Au were deposited by E-beam evaporation to form ohmic contact to p-CdTe. After the metallization, post annealing was performed by oven heat treatment at 150.deg. C or by RTA(Rapid Thermal Annealing) at 250-350.deg. C. Surface chemical treatments of p-CdTe thin film improved metal/p-CdTe interface properties and post heat treatment resulted in low contact resistivity to p-CdTe.Of the various contact metal, Cu/Au and Cu show low contact resistance after oven and RTA post-heat treatments, respectively.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.5
• /
• pp.33-39
• /
• 1998

The BST (Ba$_{1-x}$ Sr$_{x}$TiO$_{3}$)(50/50) thin film has been grown by RF magnetron reactive sputtering and its characteristics such as crystallization, surface roughness, and electrical properties have been investigated with varying the film thickness. The crystallization and surface roughness of BST thin film are investigated by using XRD and AFM, respectively The BST thin film anealed at 800.deg. C for 2 min has pure perovskite structure and good surface roughness of 16.1.angs.. We estimate that the thickness and dielectric constant of interface layer between BST film and electrode are 3nm and 18.9, respectively, by measuring the capacitance with various film thickness. As the film thickness increases form 80nm to 240nm, the dielectric constant at 10kHz increases from 199 to 265 and the leakage current density at 200kV/cm decreases from 0.682.mu.A/cm$^{2}$ to 0.181 .mu.A/cm$^{2}$. In the case of 240nm-thick BST thin film, the charge storage density and leakage current density at 5V are 50.5fC/.mu.m$^{2}$ and 0.182.mu.A/cm$^{2}$, respectively. The values indicate that the BST thin film is a very useful dielectric material for the DRAM capacitor.or.