• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2874-2879
• /
• 2020

Due to excess reactivity, fresh nuclear fuel often contains burnable poisons. This research looks at six different burnable poisons and their impacts on reactivity, material attractiveness, and waste management. An MCNP simulation of a PWR fuel pin was performed with a fuel burnup of 60 GWd/MTHM to determine when each burnable poison fuel type would decrease below a k_∞ of 1. For determining the plutonium material attractiveness in each burnable poison fuel type, the plutonium isotopic content of the used fuel was evaluated using Bathke's Figure of Merit formula. For the waste management analysis, the thermal output of each burnable poison fuel type was determined through ORIGEN decay simulations at 100 and 300 years after being discharged from the core. The performance of all six burnable poisons varied over the three criteria considered and no single burnable poison performed best in all three considerations.

• Journal of Powder Materials
• /
• v.3 no.4
• /
• pp.253-259
• /
• 1996

The efficiency of thermoelectric devices for different applications is known to depend on the thermoelectric effectiveness of the material which tends to grow with the increase of its chemical homogeneity. Thus an important goal for thermal devices is to obtain chemically homogeneous solid solutions. In this work, the new process with rapid solidification (melt spinning method) followed by hot pressing was investigated to produce homogeneous material. Characteristics of the material were examined with HRD, SEM, EPMA-line scan and bending test. Property variations of the materials were investigated as a function of variables, such as dopant ${CdCl}_{2}$ quantity and hot pressing temperature. Quenched ribbons are very brittle and consist of homogeneous $Bi_2Te_3$, ${Bi}_{2}{Se}_{3}$ solid solutions. When the process parameters were optimized, the maximum figure of merit was 2.038$\times$$10^{-3}K^{-4}. The bending strength of the material hot pressed at 50$0^{\circ}C$ was 8.2 kgf/${mm}^2$.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.217-220
• /
• 2002

In this paper, we have investigated electronical chara-cteristics of power LDMOSFETS having different ex-tended gate lengths(1.B${\mu}{\textrm}{m}$, 2.4${\mu}{\textrm}{m}$, 3.O${\mu}{\textrm}{m}$) in the temperature range of 300k-500K. The results of this study indicate that on-resistance, breakdown voltage increase with temperature. and drain current, threshold voltage, transconductance decrease with temperature. Particular the facts, we observed that Le is the more increase, on-resistance is the more decrease. because every conditions are fixed normal states, only change the Le. As a result, Ron/BV, known for a figure of merit of power device, increase with temperature.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.13-16
• /
• 2002

In this study, the electrical characteristics of 100v-Class LDMOSFET for high temperature applicat -ions such as electronic control systems of automo -biles and motor driver were investigated. Measurement data are taken over wide range of temperature(300k-SOOK) and various gate length(1.5 #m-3.0#m, step 0.3). In high temperature condition(>500k), drain current decreased over 30%, and specific on- resistance increased about three times in comparison with room temperature. Moreover, the ratio ROJBV, a figure of merit of the device, increased with increasing temperature.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.201-204
• /
• 2001

LDMOSFET devices operated at low temperature have applications on satellite, space shuttle and low temperature system, etc. In this study, we measured the electrical characteristics of 100v Class LDMOSFET for low temperature application. Measurement data are taken over a wide range of temperatures (100K-300K) and various drift region lengths(6.6${\mu}{\textrm}{m}$, 8.4${\mu}{\textrm}{m}$, 12.6${\mu}{\textrm}{m}$). Maximum transconductance, $g_{m}$ and drain current at low temperatures(~100K) increased over about 260%, 50% respectively, in comparison with the data at room temperature. Breakdown voltage B $V_{ds}$, and specific on- resistance decreased. Besides, ratio $R_{on}$ BV, a figure of merit of the device, decreased with decreasing temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.83-87
• /
• 2020

In this letter, we propose and analyze a new asymmetric structure that can be used for next-generation power semiconductor devices. We compare and analyze the electrical characteristics of the proposed device with respect to those of symmetric devices. The proposed device has a p-emitter on the right side of the cell. The peak electric field is reduced by the shielding effect caused by the p-emitter structure. Consequently, the breakdown voltage is increased. The proposed asymmetric structure has an approximately 100% higher Baliga's figure of merit (~94.22 MW/㎠) than the symmetric structure (~46.93 MW/㎠), and the breakdown voltage of the device increases by approximately 70%.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.4
• /
• pp.199-202
• /
• 2011

Ga doped ZnO thin films were deposited with RF magnetron sputtering on glass substrate without intentional substrate heating and then the effect of post deposition annealing temperature on the structural, optical and electrical properties of the films was investigated. The post deposition annealing process was conducted for 30 minutes in a vacuum of $1{\times}10^{-3}$ Torr and the vacuum annealing temperatures were 150 and $300^{\circ}C$, respectively. As increase annealing temperature, GZO films show the increment of the prefer orientation of ZnO (002) diffraction peak in the XRD pattern and the optical transmittance in a visible wave region was also increased, while the electrical sheet resistance was decreased. The figure of merit obtained in this study means that GZO films which vacuum annealed at $300^{\circ}C$ have the highest optoelectrical performance in this study.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.39-43
• /
• 1997

Mercurous chloride (Hg$_2$Cl$_2$) has many advantages in its applications to acousto-optic, and opto-electronic devices because it has the unique properties of a broad transmisson range, well into the far infra-red, a low acoustic velocity, a large birefringence, and a high acousto-optic figure of merit[1]. Hg$_2$Cl$_2$ has a high vapor pressure, hence single crystals are usually grown by physical vapor transport(PVT) method in closed silica glass ampoules. We discuss the application of the laser Doppler velocimetry to measure the flow field inside a closed ampoule. The experimental results, are discussed its relationship to computational model and compared to their expectations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.71-74
• /
• 1993

In this paper, the permeability(${\mu}$$\sub$r′/, ${\mu}$$\sub$r"/), permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) and absorption properties of Ferroxplana/Rubber composites were investigated. The composite specimens were prepared by molding and curing the mixtures of matrix rubber and Ni$_2$Y ferroxplana powders which were synthesized by coprecipitated method. The permeability(${\mu}$$\sub$r′/) of specimen was decreased in the range of 8∼12.5(GHz) and the permeability(${\mu}$$\sub$r"/) and Permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) were increased. The optimum thickness of electromagnetic wave absorber (F/R=4, 1,200($^{\circ}C$) ), utilizing the Smith chart, was about 3.0(mm). The Figure of Merit was 93(%).

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.2
• /
• pp.67-71
• /
• 2006

In this paper, we have investigated the structure and dielectric properties of the $(Ba_{0.6}Sr_{0.4})TiO_3$ (BST) thin films fabricated on MgO(100)/Si substrate by an alkoxide-based sol-gel method. Both the structure and morphology of those films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). For the MgO(100)/Si substrate, the BST thin films exhibited highly (100) orientation. The highly (100)-oriented BST thin films showed high dielectric constant, tunability, and figure of merit (FOM). The dielectric constant, dielectric loss and tunability of the BST thin films annealed at $700^{\circ}C$ deposited on the MgO(100)/Si substrate measured at 10 kHz were 515.9, 0.0082, and 54.3%, respectively.