• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1633-1635
• /
• 1997

For AMLCD pixel switching device, poly-Si TFT has the advantage of high field effect mobility over a-Si TFT. However, it also has some disadvantage such as large leakage current and more masking steps. We propose a new Inverse Staggered poly-Si TFT with a-Si offset. We have fabricated the new device and verified high ON/OFF current ratio. The device has lower leakage current level than the conventional Inverse Staggered poly-Si TFT and the same number of masking steps compared with conventional a-Si TFT's.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2353-2358
• /
• 2017

A femtosecond laser pre-annealing process based on indium zinc oxide (IZO) thin-film transistors (TFTs) is fabricated. We demonstrate a stable pre-annealing process to analyze surface structure change of thin films, and we maintain electrical stability and improve electrical performance. Furthermore, dynamic electrical characteristics of the IZO TFTs were investigated. Femtosecond laser pre-annealing process-based IZO TFTs exhibit a field-effect mobility of $3.75cm^2/Vs$, an $I_{on}/I_{off}$ ratio of $1.77{\times}10^5$, a threshold voltage of 1.13 V, and a subthreshold swing of 1.21 V/dec. And the IZO-based inverter shows a fast switching behavior response. From this study, IZO TFTs from using the femtosecond laser annealing technique were found to strongly affect the electrical performance and charge transport dynamics in electronic devices.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.13-17
• /
• 2011

A highly miniaturized on-chip $180^{\circ}$ hybrid employing periodic ground strip structure (PGSS) was realized on a silicon radio frequency integrated circuit. The PGSS was placed at the interface between $SiO_2$ film and silicon substrate, and it was electrically connected to top-side ground planes through the contacts. Owing to the short wavelength characteristic of the transmission line employing the PGSS, the on-chip $180^{\circ}$ hybrid was highly miniaturized. Concretely, the on-chip $180^{\circ}$ hybrid exhibited good radio frequency performances from 37 GHz to 55 GHz, and it was 0.325 $mm^2$, which is 19.3% of a conventional $180^{\circ}$ hybrid. The miniaturization technique proposed in this work can be also used in other fields including compound semiconducting devices, such as high electron mobility transistors, diamond field effect transistors, and light emitting diodes.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.5
• /
• pp.197-199
• /
• 2011

In this paper, the bottom-gate thin-film transistors (TFTs) were fabricated with an amorphous/microcrystalline Si double layer (DL) as an active layer and the variations of the electrical characteristics were investigated according to the DC bias stresses. Since the fabrication process of DL TFTs was identical to that of the conventional amorphous Si (a-Si) TFTs, it creates no additional manufacturing cost. Moreover, the amorphous/microcrystalline Si DL could possibly improve stability and mass production efficiency. Although the field effect mobility of the typical DL TFTs is similar to that of a-Si TFTs, the DL TFTs had a higher reliability with respect to the direct current (DC) bias stresses.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1342_1342
• /
• 2009

Zinc tin oxide (ZTO) based thin-film transistors (TFTs) were fabricated on glass substrate by using sol-gel method. The fabricated ZTO TFT had bottom gate and top contact structure with ZTO layer formed by spin coating from ZTO solution. The fabricated TFT showed field-effect mobility of about 2 - $4\;cm^2/V{\cdot}s$ with on/off current ratios >$10^7$, and threshold voltage of 2 V.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1334_1335
• /
• 2009

In this paper we have presented recent studies concerning the high performance oxide thin film transistor (TFT) with a-IGZO channel and $ZrO_2$ gate dielectrics. The a-IGZO TFT is fully fabricated at room-temperature without any thermal treatments. The $ZrO_2$ is one of the most promising high-k materials with high capacitance originated from the high dielectric constant. The a-IGZO TFT with $ZrO_2$ shows high performance exhibiting high field effect mobility of $39.82\;cm^2$/Vs and high on-current of 2.52 mA at 10V.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1909-1915
• /
• 2004

The hermetic rotary compressor is one of the most important components of an air conditioning system since it has a great effect on both the performance and the noise and vibration of the system. Noise and vibration occurs due to gas pulsation during the compression process and to unbalanced dynamic force. In order to reduce noise and vibration, it is necessary to identify their sources and transmission path and effectively control them. Many approaches have been tried in order to identify the noise transmission path of a compressor. However, identification has proven to be difficult since the characteristics of compressor noise are complicated due to the interaction of the compressor parts and gas pulsation. In this study, the statistical energy analysis has been used to trace the energy flow in the compressor and to identify the transmission paths from the noise source to the exterior sound field.

• Vacuum Magazine
• /
• v.3 no.1
• /
• pp.22-31
• /
• 2016

Although graphene has been considered as one of the promise materials for future logic devices due to extremely high mobility, its applications in electronics have been limited to a few cases such as a flexible interconnect, and RF devices. Furthermore, most of the studies on graphene devices reported unstable operations, claimed to be due to the poor quality of graphene. Nevertheless, recent studies showed that the electrical performance of graphene field effect transistor could be stabilized even with CVD graphene when well-established integration processes to control the interface of graphene were used. These results indicate that as in the case of silicon devices, a proper control of graphene interface is very important for the stable operation of graphene device as well as other 2D material based devices.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1489-1498
• /
• 2015

Gallium nitride (GaN)-based power switching devices, such as high-electron-mobility transistors (HEMT), provide significant performance improvements in terms of faster switching speed, zero reverse recovery, and lower on-state resistance compared with conventional silicon (Si) metal-oxide-semiconductor field-effect transistors (MOSFET). These benefits of GaN HEMTs further lead to low loss, high switching frequency, and high power density converters. Through simulation and experimentation, this research thoroughly contributes to the understanding of performance characterization including the efficiency, loss distribution, and thermal behavior of a 160-W GaN-based synchronous boost converter under various output voltage, load current, and switching frequency operations, as compared with the state-of-the-art Si technology. Original suggestions on design considerations to optimize the GaN converter performance are also provided.

• Journal of Information Display
• /
• v.9 no.4
• /
• pp.35-38
• /
• 2008

This paper reports the electrical characteristics of polyvinylpyrrolidone (PVPy) and the performance of organic thin-film transistors (OTFTs) with PVPy as a gate insulator. PVPy shows a dielectric constant of about 3 and contributes to the upright growth of pentacene molecules with $15.3\AA$ interplanar spacing. OTFT with PVPy exhibited a field-effect mobility of 0.23 $cm^2$/Vs in the saturation regime and a threshold voltage of -12.7 V. It is notable that there was hardly any threshold voltage shift in the gate voltage sweep direction. Based on this reliable evidence, PVPy is proposed as a new gate insulator for reliable and high-performance OTFTs.