• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.169-188
• /
• 2019

This study was carried out unmanned aerial photography and terrestrial laser scanning to establish digital database on original wall of Gyejoksanseong fortress, and measured ground control points for continuity of the monitoring. It also performed precise examination with the naked eye, unmanned aerial photogrammetry, endoscopy, total station and handy measurement to examine the structural stability of the original walls. The ground control points were considered as a point where visual field can be secured, 3 points were selected around each of the south and north walls. For the right side of the south original wall, aerial photogrammetry was conducted using drones and a deviation analysis of 3-dimensional digital models was performed for short-term monitoring. As a result, the two original walls were almost matched in range within 5mm, and no difference indicating displacement of stones was found, except for partial deviation. Regular monitoring of the areas with structural deformation such as bulging, weak and fracture zone by precisely examining with the naked eye and using high-resolution photo data revealed no distinct change. The inner foundation observed through endoscopy found out that filling stones of the original walls were still remained, while most filling soil was lost. As a result of measuring the total station focusing around the points with structural deformation on the original walls, the maximum displacements of the north and south walls were somewhat high with 6.6mm and 3.8mm, respectively, while the final displacements were relatively stable at below 2.9mm and 1.4mm, respectively. Handy measurement also did not reveal clear structural deformation with displacements below 0.82mm at all points. Even though the results of displacement monitoring on the original walls are stable, it is hard to secure structural stability due to the characteristics of ramparts where sudden brittle fracture occurs. Therefore, it is necessary to conduct conservational scientific diagnosis, precise monitoring, and structural analysis based on the 3-dimensional figuration information obtained in this research.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.670-691
• /
• 2018

This study presents the research results of the BMT(Benchmark Model Test) simulations of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to predict fault reactivation and the coupled hydro-mechanical behavior of fault. BMT scenario simulations of Task B were conducted to improve each numerical model of participating group by demonstrating the feasibility of reproducing the fault behavior induced by water injection. The BMT simulations consist of seven different conditions depending on injection pressure, fault properties and the hydro-mechanical coupling relations. TOUGH-FLAC simulator was used to reproduce the coupled hydro-mechanical process of fault slip. A coupling module to update the changes in hydrological properties and geometric features of the numerical mesh in the present study. We made modifications to the numerical model developed in Task B Step 1 to consider the changes in compressibility, Permeability and geometric features with hydraulic aperture of fault due to mechanical deformation. The effects of the storativity and transmissivity of the fault on the hydro-mechanical behavior such as the pressure distribution, injection rate, displacement and stress of the fault were examined, and the results of the previous step 1 simulation were updated using the modified numerical model. The simulation results indicate that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing interaction and collaboration with other research teams of DECOVALEX-2019 Task B and validated using the field experiment data in a further study.

• Korean Journal of Child Education & Care
• /
• v.18 no.4
• /
• pp.247-265
• /
• 2018

Objective: The purpose of this study was to investigate the effect of teacher support program for integration of handicapped children on teaching efficacy of daycare center teachers. Methods: In the study, 12 day care teachers in 4 day care centers in Seoul and Gyeonggi area were selected as experimental groups and 12 teachers in 5 day care centers were selected as control group. Teacher education is carried out through group education, such as understanding of developmental area, curriculum modification, activity-based embedded intervention, cooperative learning, direct teaching, disability understanding education, behavior support, family support. Individual teacher education provided counseling on the reality of child care for children with disabilities that reflects the needs of teachers for integrated child care for handicapped children. Teacher's Efficacy in Inclusive Practices (TEIP) was used as a pre post test to measure teacher's efficacy change. In order to analyze the results of the study, two independent sample t tests were conducted on the difference between pre-post test of teacher efficacy between the two groups. Results: As a result, There was a significant difference in the pre-post change of teacher efficacy between the two groups. Conclusion/Implications: The results of this study are as follows, teacher support program provided immediate feedback in integrated child daycare center for the handicapped children, child care teachers improved their integrated handicapped children care expertise, provided responsive teacher support program to the actual needs of the site, teacher support program reflected various variables related to integration, and emphasized the cooperative relationship between researcher and child daycare center teacher. The results of this study can be used as actual data of field where lack of support for the integration of handicapped children is lacking.

• 대한공업교육학회지
• /
• v.44 no.1
• /
• pp.72-93
• /
• 2019

The purpose of this study was to provide basic data needed to establish a system of career education which can offer necessary information for middle school students to select vocational high schools suiting to their talent and aptitude. For this, the study formulated research questions: how middle school students in Gyeonggi-do could acquire information related with entering high school; their level of understanding about general high school and vocational high school and their level of information requirement; real state and effect (level of helping them choose future school) of assistance activity for career education as provided by vocational high schools. For the analysis, the study developed a questionnaire and conducted survey for 4,459 3rd graders from 627 middle schools at Gyeonggi-do. Findings were as follows. First, methods of middle school students getting information related with entering high school turned out in the order of internet search (42.0%), consultation with family and friends (25.5%), consultation with teachers (24.0%). While, their methods of getting information related with entering vocational high school turned out in the order of briefing session by vocational high schools (39.4%), field trip to vocational high schools (24.9%), consultation with teachers from vocational high schools (15.7%). Second, the level of understanding (five points full marks) of Gyeonggi-do middle school students about high school by the type they wished to enter, and the level of information requirement (five points full marks) turned out 3.65 and 3.67 respectively for students who wished to enter general high schools, with the difference being 0.02. On the other hand, the level of understanding and that of information requirement turned out 2.92 and 3.25 respectively with the difference being 0.33, for students who wished to enter vocational high schools. Third, looking at the real state of participation of Gyeonggi-do middle school students in assistance activities for career education provided by vocational high schools, 79.4% of all students were participating. Activity with high participation ratio out of these turned out to be in the order of PR and guide book (booklet, brochure, etc.) for vocational high schools at 90.3%, briefing session prepared by vocational high schools on visit at 87.8% and video of vocational high school PR and introduction at 85.9%. The level of how these activities helped middle school students choose their high school was 3.45, showing more effect by 0.13 on students wishing to enter vocational high schools compared to those wishing to enter general high schools.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.273-281
• /
• 2018

Wet hill seeding (WHS) is one of the more famous labor and money saving methods technology used for rice cultivation. In WHS, rice standing percentage and weedy rice occurrence are the most important factors considered to secure a rice yield. We investigated the optimum seeding date of WHS in the Southern Plain area of South Korea. Weedy rice needed two weeks at $15^{\circ}C$ to show over 80% emergence. Germinated rice seed grown at $20^{\circ}C$ needed over for 10 days to achieve a shoot length over 3 cm. In field cultivation, the mean temperature for ten days after seeding showed a highly positive correlation with rice standing rate, spikelet number per square meter and yield index that favorably compared to machine transplanting. With these data, we suggest that the optimum seeding date of WHS that can secure over 98% of yield index of machine transplanting in Southern part of Korea is May. 21~Jun. 5 in Honam and May. 16~Jun. 5 in Yeongnam area.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.172-193
• /
• 2013

This study examines the production techniques and raw materials shown in the Korean dried-lacquer statues of Buddha through a careful observation of the Seated Dried-lacquer Bodhisattva Statue from the late Goryeo Dynasty which is currently possessed by Okura Museum of Art in Tokyo. As a method of study, the X-ray data and the results from a field survey were combined to analyze the production techniques and the characteristics of raw materials. Based on this analysis, a hypothesis was established on the production process and verified through a reenactment of the actual production process. Then, the characteristics of the techniques applied to each process and the raw materials were recorded in detail. Specifically, the dried lacquer techniques and the raw materials were estimated based on the results of naked-eye observation in comparison with the literature, especially the records of "Xiu Shi Lu" written by Huang Cheng of the Ming Dynasty which is considered as 'the textbook of lacquer techniques.' The raw materials used in the production of the traditional Korean lacquerware inlaid with mother-of-pearl were also referenced. As a result, it was found that the features of production techniques and the raw materials found in the Statue at Okura Museum of Art have many similarities with those of the Seated Dried-lacquer Statue of Lohan (Arhat) from Yuanfu 2 Nian Ming (1098) of the Song Dynasty which is currently at the Honolulu Museum of Art. In particular, the similarities include that the interior of the statue being vacant because the clay and the wood core were not replaced after being removed from the prototype, that the complete form was made in the clay forming stage to apply the lacquer with baste fiber fabric, that the clay and the wood core were removed through the bottom of the statue, and that the modeling stage was omitted and the final coat over the statue is very thin. Additionally, decorating with ornaments like Bobal and Youngrak made of plastic material was a technique widely popular in the Song Dynasty, suggesting that the Seated Dried-lacquer Bodhisattva Statue in Okura Museum of Art was greatly affected by the production techniques of the Dried-lacquer Buddha Statue from the Song Dynasty. There is no precise record on the origin and history of the Korean Dried-lacquer Buddha Statues and the number of existing works is also very limited. Even the records in "Xuanhe Fengshi Gaoli Tujing" that tells us about the origin of the Dried-lacquer Buddha Statue from the Yuan Feng Period (1078~1085) do not indicate the time of transmission. It is also difficult to trace the clear route of transmission of production techniques through existing Dried-lacquer Buddha Statues. Fortunately, this study could at least reveal that the existing Dried-lacquer Buddha Statues of Korea, including the one at Okura Museum of Art, have applied the production techniques rather differently from those used in the production of Japanese Datsukatsu Dried-lacquer Buddha Statues that have been known as the standard rule in making dried-lacquer statues of Buddha for a long time.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.190-211
• /
• 2010

The purpose of this paper is to provide the preliminary data for maintenance of old trees of natural monuments and establishing protection projects. Accordingly, growth conditions, location circumstances, environment and protection management were analyzed for old trees at 34 sites in Gyeongsangbuk-do. Tree forms, crown, trunk and trees' health, leaves volume were analyzed in survey sites. As the results, the growth of Picrasma quassioides in Songsadong, Andong-si and Catalpa ovata in Hongwon-ri, Cheongsong-gun were not in good condition, along with other old trees of 6 cities (Quercus variabilis in Susan-ri, Uljin-gun, Juniperus chinensis in Hujeong-ri, Uljin-gun, Pyrus ussuriensis in Ssangjeon-ri, Uljin-gun, Salix glandulosa var. pilosa in Deokchon-ri, Cheongdo-gun, Pinus densiflora for. multicaulis in Hwasan-ri, Mungyeong-si, Pinus densiflora in Daeha-ri, Mungyeong-si). Accoding to these results, protection project and consistent monitoring are necessary. The analysis results of growth conditions per location circumstances showed that the old trees in the small spaces with large traffic of people were in bad condition. Therefore, it is necessary to secure sufficient space and soil improvement for such trees. The analysis results of growth conditions per species showed that Zelkova serrata, Quercus spp., Pinus densiflora are in good condition while Salix koreensis and others, i.e. a singular tree, are in poor condition. Thus, relatively smaller individuals and separately situated trees need careful management in their protection. The analysis results of trunk's growth ratio showed that Pinus densiflora, Ginkgo biloba, Zelkova serrata are in good condition whereas Juniperus chinensis, Quercus variabilis, Salix koreensis are not. It is a recent trend that tree surgeries are gradually decreasing; there are a number of damaged trees with no maintenance/management, and several sites requiring mend trunks management and cabling, bracing in protection and management projects. Hence, in the future, local government and management organizations should plan for systematic management and establish a protection plan for the natural monument trees. Also, 12 sites were found to be in need to purchase lands in order to secure the growth spaces, and since most of these areas are available for purchase, it is needed to promote a budget and purchase those areas through persuasion of the owner. These areas seems crucial in order to maximize the effect of conservation efforts and budgets for the preservation and restoration of the old trees.

• Economic and Environmental Geology
• /
• v.52 no.3
• /
• pp.251-258
• /
• 2019

During the detailed geological survey around the southern Yangsan Fault, we newly found a Quaternary fault outcrop, which cuts unconsolidated sediments. The fault named the Sinwoo site, located in the Sinwoo pasture, Miho-ri, Duseo-myeon, Ulsan metropolitan city, is the first discovered Quaternary fault near the western part of the south Yangsan Fault. In this study, we provide information on characteristics of fault geometry and unconsolidated sediment at Sinwoo site based on the analysis data of topography, drainage, and lineament around the study site. The fault site is situated at pediment slope, but fan-shaped middle terrace, as well as thick sediment exposed at low terrace, indicates that the unconsolidated sediments have been deposited in the alluvial fan environment. The drainage develops to the third-order drainage system, and the first and the second drainage system meet at right angles to each other and form a radial drainage pattern. In addition, the NE-SW direction lineaments can be identified on the basis of the curvature of the river and the step of the topographic relief, running over the Sinwoo site. The fault of $N30-35^{\circ}E/79-82^{\circ}SE$ shows ~ 5.8 m apparent vertical offset and dominantly reverse-slip sense based on slickenline, rotation of pebbles, and drag folding at footwall. However, some discontinuous sediments observed in the footwall are interpreted as fissure-filling materials due to the strike-slip movement. Now, we are under multidisciplinary investigations of additional field survey and age dating in order to determine the evolution of Sinwoo site fault during the Quaternary.

• The Korean Journal of Archival Studies
• /
• no.39
• /
• pp.193-228
• /
• 2014

In recent years, as well as management of public records, interest in the private archive of large and small is growing. Dedicated archive has various types. In addition, lack of personnel and budget, personnel records management professional because the absence, that help you maintain these records in a systematic manner is not easy. Request to the system have continued to rise, but the budget and professionals in order to solve this problem are missing. As breakthrough of the burden to the system with archive dedicated, it introduces the trends and meaning of public recording system, and was examined in detail AtoM function. AtoM is public land can be made by a method that requires a Web service, the database server. Without restrictions, including the advantage of being available free of charge, by the application or operating system specific, installation and operation is convenient. In addition, compatibility, and is highly scalable, AtoM use and convenient archive of private experiencing a shortage of personnel and budget. Because in terms of data management, and excellent interoperability and search share, and use, it is possible in the future, it favors also documentary use through a network of inter-agency archives and private. In addition, Enhancements exhibition services through cooperation with Omeka, long-term storage through Archivematica, many discussion is needed. Public centered around the private area of the recording management spilling expanded, open-source software allows to balance the recording system will be able to play an important role. In addition, the efforts of academia and in the field, close collaboration between the open source recording system through a user study should be continued. Furthermore, co-operation and sharing of private archives expect come true.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.111-118
• /
• 2019

Chest digital tomosynthesis has become a practical imaging modality because it can solve the problem of anatomy overlapping in conventional chest radiography. However, because of both limited scan angle and finite-size detector, a portion of chest cannot be represented in some or all of the projection. These bring a discontinuity in intensity across the field of view boundaries in the reconstructed slices, which we refer to as the truncation artifacts. The purpose of this study was to reduce truncation artifacts using a weighted normalization approach and to investigate the performance of this approach for our prototype chest digital tomosynthesis system. The system source-to-image distance was 1100 mm, and the center of rotation of X-ray source was located on 100 mm above the detector surface. After obtaining 41 projection views with ${\pm}20^{\circ}$ degrees, tomosynthesis slices were reconstructed with the filtered back projection algorithm. For quantitative evaluation, peak signal to noise ratio and structure similarity index values were evaluated after reconstructing reference image using simulation, and mean value of specific direction values was evaluated using real data. Simulation results showed that the peak signal to noise ratio and structure similarity index was improved respectively. In the case of the experimental results showed that the effect of artifact in the mean value of specific direction of the reconstructed image was reduced. In conclusion, the weighted normalization method improves the quality of image by reducing truncation artifacts. These results suggested that weighted normalization method could improve the image quality of chest digital tomosynthesis.