• 한국시뮬레이션학회논문지
• /
• 제22권4호
• /
• pp.67-82
• /
• 2013

본 논문은 공학급 국방 모델의 시뮬레이션 성능 향상을 위해 다중 충실도(Multi-fidelity) 모델링 시뮬레이션(M&S: Modeling and Simulation) 기법을 제안한다. 제안하는 기법은 다양한 충실도를 지닌 모델을 활용하여 고 충실도 모델의 시뮬레이션과 비교하여 유사한 수준의 시스템 분석 결과를 얻음과 동시에 시뮬레이션 성능 측면에서 이득을 가져오는 방안이다. 다중 충실도 원리를 적용하기 위해 본 논문은 충실도를 모델 동작과 실행 측면으로 세분화하고, 충실도 변환 지점을 FCP (Fidelity Change Point)로 정의한다. 이러한 원리를 바탕으로 본 논문은 다음의 세 가지 쟁점을 다룬다. 먼저, 모델 동작과 실행 측면의 충실도 변환을 위한 모델 구조와 제안하는 모델에 대한 수학적 형식론, 마지막으로 모델 실행을 위한 시뮬레이션 알고리즘을 제안한다. 사례 연구로 어뢰의 표적 추적 시나리오에 대한 기초 실험을 수행하였고, 실험 결과 제안하는 기법을 사용한 경우 기존의 시뮬레이션과 비교하여 최대 4.24배의 시뮬레이션 성능 향상을 보임을 확인하였다. 본 논문에서 제안하는 기법은 M&S 기반의 시스템 분석을 하는 다양한 분야에서 활용될 수 있음을 기대한다.

• 한국간호교육학회지
• /
• 제23권1호
• /
• pp.95-107
• /
• 2017

Purpose: The aim of this study was to assess the efficacy of web-based simulation and high-fidelity simulation on acute heart disease patient care. Methods: The project used a comparative study design with two simulation-based training modalities. A total of 144 nursing students participated in this study: 76 students in a web-based simulation, and 68 students in a high-fidelity simulation. Participants rated their self-efficacy, problem-solving ability, interest in learning, level of stress, satisfaction with the simulation experience, and level of difficulty of the simulation. Results: The scores for self-efficacy, problem-solving ability, and interest in learning including interest in clinical training in the high-fidelity simulation group was higher than in the web-based simulation group. However, there were no significant differences in interest in learning, including interest in nursing knowledge, and in lab training, level of stress, satisfaction with the simulation experience, and level of difficulty of the simulation. Conclusion: A high-fidelity simulation of acute heart disease patient care might be beneficial to developing many more abilities for nursing students than would a web-based simulation. Also, since the web-based simulation improved interest in nursing knowledge, it could be a viable alternative to high-fidelity simulation. Further study is needed to verify the effects of varied levels of simulation-based care with more rigorous outcomes.

• ETRI Journal
• /
• 제29권5호
• /
• pp.703-705
• /
• 2007

An image fidelity assessment using the edge histogram descriptor (EHD) of MPEG-7 is presented. Neither additional data nor fragile watermarking is needed, and there is no need to access the original image as a reference. Only the EHDs of the original image and the received image are required. The peak signal-to-noise ratio (PSNR) obtained by comparing the EHD extracted from the received image and that of the original image is used to assess the noise level of the received image. Experimental results show that the PSNRs calculated from the conventional pixel-to-pixel gray level and from the proposed bin-to-bin EHD maintain a proportional relationship. This implies that the EHD can be used instead of image data for the image fidelity assessments.

• 한국항공우주학회지
• /
• 제42권2호
• /
• pp.108-118
• /
• 2014

근사모델을 이용한 최적설계 문제에서는 설계변수의 수가 증가함에 따라 근사모델의 정확도를 확보하기 위한 계산 횟수가 급격히 증가한다. 이를 해결하기 위해 저정확도 모델을 바탕으로 고정확도 모델로 보정하는 Variable-Fidelity Modeling을 이용하였다. 본 논문에서 Variable-Fidelity Model로는 계층적 크리깅 모델을 이용하였으며, 다목적 유전자 알고리즘과 결합하여 최적화 프레임워크를 제안하였다. 이 방법의 유용성을 검증하기 위하여 천음속 영역에 대한 익형 최적 설계를 하였다. 설계변수로는 PARSEC의 파라메터를 이용하였으며, 서로 다른 격자수를 가지는 경우 그리고 서로 다른 정확도를 가지는 해석자를 이용한 경우에 관하여 해석을 수행하였다. 검증을 위해 단일 정확도 모델에 대한 최적화 결과와 비교하였다. 모든 경우에 관하여 파레토 라인이 유사하게 나오는 것을 확인 할 수 있었으며, 계산시간은 계층적 크리깅 모델을 이용한 Variable-Fidelity Model이 단일 정확도 모델에 비하여 훨씬 줄어들었다. 이를 바탕으로 본 논문의 방법이 단일 정확도를 가지는 모델에 대한 최적화 방법과 유사한 정확도를 가지며 더욱 효율적임을 확인 할 수 있다.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.137-145
• /
• 2020

Providing safety training to construction workers is essential to reduce safety accidents at the construction site. With the prosperity of visualization technologies, Immersive Virtual Reality (IVR) has been adopted for construction safety training by providing interactive learning experiences in a virtual environment. Previous research efforts on IVR-based training have found that the level of fidelity of interaction between real and virtual worlds is one of the important factors contributing to the sense of presence that would affect training performance. Various interactive devices that link activities between real and virtual worlds have been applied in IVR-based training, ranging from existing computer input devices (e.g., keyboard, mouse, joystick, etc.) to specially designed devices such as high-end VR simulators. However, the need for high-fidelity interactive devices may hinder the applicability of IVR-based training as they would be more expensive than IVR headsets. In this regard, this study aims to understand the impact of the level of fidelity of interactive devices in the sense of presence in a virtual environment and the training performance during IVR-based forklift safety training. We conducted a comparative study by recruiting sixty participants, splitting them into two groups, and then providing different interactive devices such as a keyboard for a low fidelity group and a steering wheel and pedals for a high-fidelity group. The results showed that there was no significant difference between the two groups in terms of the sense of presence and task performance. These results indicate that the use of low-fidelity interactive devices would be acceptable for IVR-based safety training as safety training focuses on delivering safety knowledge, and thus would be different from skill transferring training that may need more realistic interaction between real and virtual worlds.

• 한국학교수학회논문집
• /
• 제17권1호
• /
• pp.45-71
• /
• 2014

이차곡선에 대해 고교과정에서는 종합적인 개념습득이 이루어질 기회가 부족하고 대학과 정은 고등수학적 접근으로 진행되어 여전히 개념습득의 어려움을 갖는다는 점을 인식하고 예비교사들의 문제제기에 의한 수학적 사고확장을 돕고자 그래핑 계산기를 활용하여 수학적, 인지적, 교수적 충실도를 조사하였다. 인지적 충실도에서는 세 가지 수학적 속성의 문제제기가 이루어졌으며 이 때 수학적 충실도가 인지적 충실도와 순환적 연관성을 보였으며 교수적 충실도는 인지적 충실도를 더욱 활성화시키는 것으로 나타났다.

• 대한본초학회지
• /
• 제34권6호
• /
• pp.33-44
• /
• 2019

Objectives : This study aims to record and conserve oral traditional knowledge of medicinal animals from the indigenous people living in the local communities of Songnisan National Park, Korea. Methods : Data was collected by participatory observations and in-depth interviews with semi-structured questionnaires. Quantitative comparative analyses were accomplished through data received from the following three methods: informant consensus factor (ICF), fidelity level (FL), and network analysis. Results : The investigation reveals that the indigenous people have used 49 species of medicinal animals distributed within 45 genera, belonging to 39 families with 336 different usages. According to the distribution of recorded families, the most representative families were Scolpendridae and Phasianidae, which were utilized 36 times each (10.71 % each). The category with the highest degree of consensus from informants was disorders related to the nervous system (0.97). 16 species were classified with a fidelity level of 100 %. The network analysis revealed that a lack of vigor was related to 23 species, including Agkistrodon blomhoffii, Gallus domesticus, and Canis familiaris, among the total 49 species investigated. Conclusions : This documentation can help preserve the traditional knowledge and local health traditions of Korea that are disappearing due to rapid industrialization, urbanization, and death of the elderly with traditional knowledge. Additionally, the animals investigated in this study can be developed into medicinal food and drug for treating specific health conditions through further research.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.235-247
• /
• 2010

군사훈련을 지원하는 워게임 모델은 환경요소가 매우 중요하다. 한국군의 대부분 워게임 모델들은 동일한 기상을 모든 작전지역에 적용하고 있다. 이에 따라 충실도가 높은 모의결과를 도출하지 못하고 있다. 이러한 실정에 비추어 본 연구는 분포형 합성환경 모델링 자료를 군사시뮬레이션에 적용할 수 있는 충실도 높은 워게임을 위한 요소기술을 개발 하는 것이다. 그것은 본 연구를 위해 개발한 2D GIS기반의 "단순 탐지확률 모델"과 이 모델에 지역별로 상이한 분포형 강수량 자료의 적용 기술이다. 이로써 군사시뮬레이션 수행 시 모델 해상도(전구급~공학급), 용도(훈련용, 분석용), 묘사 수준(군단급~대대급)에 따라 다양하게 작전지역별 상이한 국지기상을 반영하는 분포형 합성환경의 제공과 사용이 가능해졌다.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.438-452
• /
• 2005

Statement of problem: The use of Ceromer is increasing in dentistry. But, the research of Ceromer has not been conducted much. Purpose : This study was to evaluate the marginal fidelity and internal adaptation according to marginal position. Materials and Methods: In this study 60 resin crowns were fabricated. The measurements of the marginal fidelity were carried out using stereomicroscope $SZ-40^{(R)}$ (Olympus, Japan) and the measurements of fracture strength were done using Instron $8871^{(R)}$ (Instron Co., U.S.A.) at a cross head speed of 1mm/min. All of the measurements were statistically analyzed by ANOVA test, multiple range test and Weibull analysis. Statistical significance was set in advance at the probability level of less than 0.05. All of the measurements were analyzed with Window $SPSS^{(R)}$ Version 10.0 soft ware for the personal computer. Results : 1. There were no statistical differences of the marginal fidelity between $Targis^{(R)}$ and $Tescera^{(R)}$, but difference between these two and $BelleGlass^{(R)}$ according to materials. 2. There were no statistical differences of the marginal fidelity between no fiber group and fiber group. There were no interactions between each maerial and with/without fiber group in the marginal fidelity 3. There were statistical differences of the fracture strength between $Tescera^{(R)}$ and $BelleGlass^{(R)}$ but no statistical differences of the fracture strength between $Targis^{(R)}$ and $Tescera^{(R)}$, $Targis^{(R)}$ and $BelleGlass^{(R)}$ according to materials. 4 There were statistical differences of the fracture strength between no fiber group and fiber group. There were no interactions between each material and with/without fiber group in the fracture strength. 5. When comparing the fracture surface, no fiber group showed the resin which were fractured at the labial surface and separated from the adhesion surface. In fiber group, the fractures took a place in resin compartments. Conclusion. The marginal fidelity and the fracture strength were clinically acceptable. From these results, $Targis^{(R)}$ and $Tescera^{(R)}$ were superior than $BelleGlass^{(R)}$ in the marginal fidelity But, when applying these resin crowns in clinic, more careful consideration is needed and further study is recommended.

• 가족자원경영과 정책
• /
• 제18권2호
• /
• pp.1-15
• /
• 2014

The purpose of this study was to investigate the impact of lifestyle on the perceived value of children in university students. Questionnaires were distributed to 467 university students with questions covering topics including general personal information and characteristics, lifestyle type, and value of children. First, a cluster analysis based on lifestyle showed that the subjects could be categorized into three groups: negative-leisure types, active-achievement types, and affirmative-fidelity types. The negative-leisure type was highly leisure-oriented and showed a negative self-value; the active-achievement type showed a perspective that valued personal and occupational self-development and a high level of labor-oriented value; and the affirmative-fidelity type favored materialism, seeking occupational aptitude and worth and showing a positive self-value. Second, an investigation of the impact of these three lifestyle types on the students' value of children revealed that the active-achievement type group had high level of belief in the necessity of childbirth, the affirmative-fidelity type group highly valued fulfilling an active parent role, and the active-achievement type group were inclined to delay childbirth. Further, the negative-leisure type group wanted the lowest number of children, while the affirmative-fidelity type group wanted the highest number of children. This study reveals that university students' lifestyle does have an effect on their value of children. It is therefore proposed that a value-focused population education for increasing fertility should relate not only to individuals' value of children but also to their broader lifestyle.