• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.937-938
• /
• 2006

Tungsten heavy alloys with different ratios of Mo and Ni-Fe matrix were liquid-phase-sintered to investigate their microstructural evolution. Results indicated that increased Mo in the alloy promoted the formation of a (W,Mo)(Ni,Fe) type intermetallic compound in the furnace-cooled condition. It was a monoeutectic reaction when the added Mo content was higher than 49at.%, or a eutectic reaction when this value was between 37at,% to 49at.%. When Mo was added between 25at.% to 37at.%, the precipitation of the intermetallic compound took place by either a eutectoid or peritectoid reaction.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.37-41
• /
• 1991

초급냉법중 단롤법으로 제작한 비정질 Fe/sub 68.5/Co/sub 5/M/sub 3/Cu/sub 1/Si/sub 13.5/ B/sub 9/(M=Nb, Mo, Mn, Cr)계 합금을 결정화온도 이상의 온도에서 열처리하여 결정화 시킨 후, 결정립 크 기에 따른 항자력, 투자율 및 교류자기이력손실을 조사 하였다. Fe/sub 68.5/Co/sub 5/M/sub 3/Cu/sub 1/ Si/sub 13.5/B/sub 9/(M=Nb, Mo, Mn, Cr)합금중 M=Mo, Nb조성에서 초미세결정립이 형성되며 약 10nm의 결정립 크기에서 가장 우수한 연자기적 특성을 나타낸다. 그러나 결정립의 크기가 10nm보다 작거나 16nm이 상 커지면 연자기 특성이 열화된다. 결정립크기가 10nm이하에서 연자기특성이 열화되는 것은 결정화 초기 결 정립계에 존재하는 것으로 판단되는 Fe rich 비정질상에 의한 것으로 고찰된다.

• Composites Research
• /
• 제34권6호
• /
• pp.345-349
• /
• 2021

The continued environmental pollution caused by fossil fuel consumption has prompted researchers around the world to develop environmentally friendly energy technologies. Electrochemical energy storage is the significant area of research in this development process, and the research significance of supercapacitors in this field is increasing. Herein, a simple electrodeposition synthetic route was explored to develop the MoP layered cathode material. The layered structure provided a highly ion-accessible surface for smooth and faster ion adsorption/desorption. After Fe was doped into MoP, the morphology of MoP changes and the electrochemical performance was significantly improved. Specific capacitance value of the binder-free FeMoP electrode was found to be 269 F g^-1 at 2 A g^-1 current density in 6 M aqueous KOH electrolyte. After adding Fe to MoP, an additional redox contribution was observed in the redox conversion from Fe³⁺ to Fe²⁺ redox pair, and the charge transfer kinetics of MoP was effectively improved. This research can provide guidance for the development of supercapacitor electrode materials through simple electrodeposition technology.

• 한국초지조사료학회지
• /
• 제23권4호
• /
• pp.237-246
• /
• 2003

Orchardgrass 및 white clover의 단파 및 혼파재배조건에서 미량요소 Fe, Mn, Cu, Zn, Mo 및 B의 조합시비가 목초의 생육, 개화, 수량, 양분 함량 및 식생구성비율 등에 미치는 영향을 구명하였다. 다량료소 양분을 동일 량 시비한 조건에서 7 수준의 미량요소 조합시비는 T$_1$; 대조구, T$_2$; Fe, T$_3$; Fe+Mn, T$_4$； Fe＋Mn＋Cu, T$_{5}$; Fe+Mn+Cu＋Zn, T$_{6}$；Fe+Mn+Cu＋Zn+Mo 및 T$_{7}$； Fe+Mn+Cu+Zn+Mo+B로 하였다. 본 II집에서는 조합시비가 목초의 건물수량 및 식생구 성비율/경합지수 특성 등에 미치는 영향을 검토하였다. 1. 조합시비가 수량에 미치는 효과는 초정, 재배방법(단파/혼파), 추파(특히 N) 및 예취 회수에 따라서 차이를 보였다. 조합시비의 효과가 orchardgrass보다 white clover(특히 혼파재배)에서 더 크게 나타났다. 두 목초 공히 T$_{7}$ 에서 가장 높은 수량을 보였으며 붕소(B)가 상대적으로 중요한 조정자 역할을 한 것으로 보였다. 2. 단파재배에서 두 목초의 수량은 T$_{7}$과 T$_2$에서 높았으며 그리고 T$_3$와 T$_{6}$ 에서 낮았다. Fe/Mn/Cu/Zn, Fe/Mo, Mo/B 및 ∑양이온/∑음이온간 비율이 상대적으로 조화된 T$_{7}$에서 수량이 가장 양호하였다. 그리고 Fe${\times}$Mn${\times}$Mo${\times}$B 간다종 교호작용이 있으며 이 때 B의 조정자 역할이 큰 것으로 보였다. white clover에 대한 이러한 효과는 추파 시보다 무추파(특히 N) 시에 더 크게 나타났다. 3. 혼파재배에서는 조화된 조합시비는 white clover의 식생구성비율과 수량제고에 상대적으로 더 긍정적 이였다. 반면에 orchardgrass는 반대적인 경향을 보였고(특히 무추비 시), 단지 T$_{7}$에서만 대조구(T$_1$)와 비슷한 수량을 보였다.다.한 수량을 보였다.

• 한국재료학회지
• /
• 제14권1호
• /
• pp.52-58
• /
• 2004

The surface property and formation behavior of a boride layer formed on Ni-Cr-Mo steel in a plasma paste boronizing treatment were investigated. The plasma paste boronizing treatment was carried out at 973～1273 K for 1-7 hrs under the gas ratio of Ar:H$_2$ (2:1). The thickness of the boride layer increased with increasing temperature and time in the boronizing treatment. The cross-section of the boride layer was a tooth structure and the hardness was Hv 2000～2500. XRD analysis revealed that the compound was identified as FeB, $Fe_2$B, and mixed phase of FeB/$Fe_2$B in the boride layer formed at 973～1073 K, 1173K, and 1273K, respectively. The Ni-Cr-Mo alloy boronized at 1173-1273 K showed the best excellent wear resistance against the sand. As a results of corrosion test in 1 M $H_2$$SO_4$ solution, $Fe_2$B formed on the matrix alloy exhibited higher corrosion resistance than FeB.

• 한국주조공학회지
• /
• 제15권3호
• /
• pp.252-261
• /
• 1995

The purposes of this study were to investigate the microstructural changes in alloy ribbons of Al-Fe-Mo-Si quarternary system at $450{\sim}500^{\circ}C$, and to study the coarsening mechanism of fine precipitates. Using the hot stage in TEM, in situ microstructural changes in Al-4Fe-0.5Mo-1.5Si alloy ribbon and Al-8Fe-2Mo-1.5Si alloy ribbon have been examined successively up to 60 hours at $450^{\circ}C$ and $500^{\circ}C$. Cell structure in zone B of Al-4Fe-0.5Mo-1.5Si alloy ribbon was observed to collapse even in 10 minutes by in-situ heating at $450^{\circ}C$ and the size of precipitates in zone B increased twice in 60 hours. The precipitates in zone A of Al-4Fe-0.5Mo-1.5Si alloy ribbon showed slower coarsening rate than those in zone B by in-situ heating at $450^{\circ}C$. The precipitates in zone A of Al-8Fe-2Mo-1.5Si alloy ribbon increased 50% by in-situ heating at $500^{\circ}C$ in 50 hours compared to the initial precipitates while any microstructual change in zone B was not observed by in-situ heating at $500^{\circ}C$ up to 50 hours. Only the precipitates in zone A of Al-4Fe-0.5Mo-1.5Si alloy ribbon satisfied $r^3{\propto}t$ relationship of coarsening mechanism.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1993년도 추계연구발표회 논문개요집
• /
• pp.52-53
• /
• 1993

• 한국자기학회지
• /
• 제16권5호
• /
• pp.240-244
• /
• 2006

본 연구에서는 하지층으로 사용한 Mo(MoN)의 두께 변화에 따른 스핀밸브 구조의 자기적 특성과 열처리 결과를 비교 검토하였다. 사용된 스핀밸브는 Si기판/$SiO_2/Mo(MoN)(t{\AA})/NiFe(21\;{\AA})/CoFe(28\;{\AA})/Cu(22\;{\AA})/CoFe(18\;{\AA})/IrMn(65\;{\AA})/Ta(25\;{\AA})$ 구조이다. 또한 본 연구에서는 MoN 하지층을 Si기판에 증착하여 열처리후 특성을 분석하였다. MoN 박막의 질소량이 증가(5 sccm까지)할수록 비저항은 증가하였다. $600^{\circ}C$에서 열처리 후 측정한 XRD 결과를 보면 Si/Mo(MoN) 박막에서 규소화합물을 발견할 수 없었다. MoN을 하지층으로 사용할 경우 $300^{\circ}C$에서 열처리 후 측정한 XPS 결과를 보면 질소 유입량이 5 sccm인 경우가 질소 유입량이 1 sccm인 경우보다 안정적임을 알았다. Mo(MoN) 하지층을 사용한 경우 하지층 두께 변화($45{\AA}$)에 따라 자기저항비와 교환결합력의 변화는 소폭이었다. Mo 하지층의 열처리 온도별 자기저항비는 열처리 전 상온에서 7.0%이었고, $220^{\circ}C$ 열처리 때 7.5%로 증가하였다. 이후 열처리 온도를 $300^{\circ}C$까지 증가 시키면 자기저항비는 7.5%에서 3.5%로 감소하였고, 질소유입량이 변화(5 sccm까지)하여도 유사한 경향을 보였다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.966-972
• /
• 2010

Single-phase $Sr_2FeMoO_6$ thin films were produced by RF magnetron sputtering for use as electrodes in integrated sensors and found to be good conductors at room temperature. The films were deposited from a powder-type sputtering target under various conditions, and were crystallized by annealing. Elimination of $O_2$ gas during deposition, by the use of a solely Ar sputtering gas under a working pressure as low as possible, and vacuum annealing were important to promote the $Sr_2FeMoO_6$ phase. However, oxygen exclusion from sputtering and annealing was not enough to yield single-phase $Sr_2FeMoO_6$: hydrogen annealing was also required. Film production was optimized by varying the deposition parameters and hydrogen annealing conditions. The film had good electrical conduction, with a low resistivity of $1.6{\times}10^{-2}\Omega{\cdot}cm$ at room temperature.

• 한국분말재료학회지
• /
• 제17권3호
• /
• pp.223-229
• /
• 2010

Iron(Fe)-Molybdenum(Mo) alloyed nanoparticles and nanowires were produced by the chemical vapor condensation(CVC) process using the pyrolysis of iron pentacarbonyl($Fe(CO)_5$) and Molybdenum hexacarbonyl($Mo(CO)_6$). The influence of CVC parameter on the formation of nanoparticle, nanowire and size control was studied. The size of Fe-Mo alloyed nanoparticles can be controlled by quantity of gas flow. Also, Fe-Mo alloyed nanowires were produced by control of the work chamber pressure. Moreover, we investigated close correlation of size and morphology of Fe-Mo nanoparticles and nanowires with atomic quantity of inflow precursor into the electric furnace as the quantitative analysis. Obtained nanoparticles and nanowires were investigated by field emission scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction.