• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1976-1980
• /
• 2010

A simple and reliable method has been developed to selectively separate and concentrate trace amounts of Fe(III) ions from water and food samples by using flame atomic absorption spectrometry. A new reagent, 5-hydroxy-4-ethyl-5,6-di-pyridin-2-yl-4,5-dihydro-2H-[1,2,4] triazine-3-thione, was synthesized and characterized by using FT-IR spectroscopy and elemental analysis. Effects of pH, concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of Fe(III) were investigated. The optimum pH was found to be 5. Eluent for quantitative elution was 10 mL of 2 M HCl. The preconcentration factor of the method, detection limit (3s/b, ${\mu}gL^{-1}$) and relative standard deviation values were found to be 25, 4.59 and 1%, respectively. In order to verify the accuracy of the method, two certified reference materials (TMDA 54.4 lake water and SRM 1568a rice flour) were analyzed. The results obtained were in good agreement with the certified values. The method was successfully applied to the determination of Fe(III) ions in water and food samples.

• Journal of the korean society of oceanography
• /
• v.36 no.3
• /
• pp.59-71
• /
• 2001

In order to investigate the temporal variability of dissolved and particulate trace metals in the Han River, water samples were collected intermittently at two sites for 3 years (August 91 to December 94). Surface seawaters covering the range of salinity were also collected at the estuarine region to evaluate the role of estuary for the riverine fluxes of trace metals within the estuary during October 95 and 96. During the study period, dissolved metal concentrations in riverwaters varied by a factor of 5-10 for Fe, Ni, Co and Cu and 50-100 for Mn, Cd and Pb depending upon the water level; high concentration during the low water and low concentration in high water period except for Fe. The concentration of dissolved Fe increased with increasing water discharge. These concentration-discharge relationships of the studied trace metals are explained by the successive dilution of waters from two different origins, which can be presumably identified as anthropogenic discharges and watershed flushing. Although estuarine waters at early mixing region were not collected due to the difficulty of sampling, mixing behaviors of metals were inferred from the concentration-salinity relationships through the laboratory mixing experiment and field sampling, and distribution coefficients between dissolved and labile particulate phases. It is suggested that the Han River estuary plays a role of accumulating Fe, Mn, Co and Pb from riverine sources due to high turbidity caused by strong tidal current, whereas this system serves as a source of dissolved Cd due to release caused by extended residence time of riverine particles.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.164-167
• /
• 2016

The effect of the B additions on glass formation and magnetic properties is reported for the $Fe_{(87-x-y)}Co_yTi_7Zr_6B_x$ (x = 2, 4, 6 and y = 35, 40) alloy system. The ribbon samples with the width of 2 mm for each composition were prepared by the melt spinning technique; furthermore, their phase information was obtained from X-ray diffraction. Glass formation and magnetic properties were measured using differential scanning calorimetry and vibrating sample magnetometer respectively. The $Fe_{45}Co_{40}Ti_7Zr_6B_2$ (x = 2 and y = 40) system has the nanocrystalline phase identified as ${\alpha}-Fe$, as well as the amorphous phase, whereas all other alloys are fully amorphous. It is associated with the role of B on the glass formation. The widest supercooled liquid region is obtained as 71 K at x = 4 (both y = 35 and 40). The saturation magnetization decreases with the increase of the amount of the B addition, and the highest value is 1.59 T as x = 2 and y = 35 for this alloy system.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.699-707
• /
• 2011

P122 steel, with a composition of Fe-10.57%Cr-1.79%W-0.96Cu-0.59Mn was arc-welded and oxidized between $600^{\circ}C$ and $800^{\circ}C$ in air for up to 6 months. The oxidation rates increased in the order of the base metal, weld metal, and heat-affected zone (HAZ), depending on the microstructure. The scale morphologies of the base metal, weld metal, and HAZ were similar because it was determined mainly by the alloy chemistry. The scale consisted primarily of a thin $Fe_2O_3$ layer at $600^{\circ}C$ and $700^{\circ}C$ and an outer $Fe_2O_3$ layer and an inner ($Fe_2O_3$, $FeCr_2O_4$)-mixed layer at $800^{\circ}C$. The microstructural changes resulting from heating between $600^{\circ}C$ and $800^{\circ}C$ coarsened the carbide precipitates, secondary Laves phases, and subgrain boundaries in the matrix, resulting in softening of the base metal, weld metal, and HAZ.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.37-44
• /
• 1987

The rates of solvolysis of $cis-[Co(en)_2Cl_2]^+$ complex have been investigated using spectrophotometric method at various pressures up to 1500 bar in several binary-aqueous mixtures(water-methyl alcohol, water-acetone, water-isopropyl alcohol and water-ethylene glycol). The activation volumes obtained from the pressure effect on rate constants were 1.13∼4.44 cm3mole-1 for methyl alcohol, 1.13∼3.59$cm^3mole^{-1}$ for acetone, 0.82∼3.44$cm^3mole^{-1}$ for isopropyl alcohol and 1.13∼2.68cm3mole-1 for ethylene glycol. In case of water-methyl alcohol, in addition to, the rates of solvolysis of this complex were determined in the presence of Fe(Ⅱ) ion and the activation volumes were -0.56∼1.59cm3mole$^{-1}$. The rates of solvolysis of this complex were analyzed by comparing with the results obtained from activation volumes and free energy cycle.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.97-105
• /
• 2014

Artificial precipitation ponds, consisting of three steps of oxidation pond, successive alkalinity producing system (SAPS) and swamp, were constructed for the treatment of the acid mine drainage from the Iwal coal mine. The efficacies of the passive treatment system in terms of neutralization of mine water and removal of dissolved ions were evaluated by the chemical analyses of the water samples. Mine water in the mine adits was acidic, showing the pH value of 2.28-2.42 but the value increased rapidly to 6.17-6.53 in the Oxidation pond. The purification efficiencies for the removal of Al and Fe were 100%, whereas those of $SO_4$, Mg, Ca, and Mn were relatively low of 50%, 40%, 24%, and 59%, respectively. These results indicate a need for application of additional remediation techniques in the passive treatment systems. The precipitates that formed at the bottom of the mine water channels were mainly schwertmannite ($Fe_8O_8(OH)_6SO_4$) and those in the leachate water were 2-line ferrihydrite ($Fe_2O_3{cdot}0.5H_2O$).

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.107-113
• /
• 2011

Plantago asiatica L. (PA), which is widely distributed in Korea, Japan and China, has traditionally been used as a popular folk medicine for the treatment of liver diseases. A variety of activities of PA was reported, that is hepatoprotective, anti-inflammatory, anti-glycation and anti-oxidant effect. Ferric nitrilotriacetate (Fe-NTA) is a potent nephrotoxic agent and has been reported to induce renal proximal tubular necrosis. In the present study, pre-treatment with PA extract (PAE) in Wistar rat followed by Fe-NTA i.p. treatment (13.5 mg Fe/kg body weight) was performed to detect the renal protective effect of PAE. Only Fe-NTA treated group showed increases in the level of serum blood urea nitrogen (BUN) and serum creatinine (Cr), and renal tissue malondialdehyde (MDA), product of lipid peroxidation. Moreover, the level of biomarkers indicate the antioxidants status, reduced glutathione (GSH), glutathione-S-transferase (GST) and glutathione reductase (GR) were decreased. However, PAE pre-treated group showed decreases in the levels of serum BUN, serum Cr and renal tissue MDA in concentration dependent manner and increases in the level of GSH, GST and GR. These results are significantly different (p < 0.05) to the other groups. Our data suggest that PAE may be used as an chemopreventive material against Fe-NTA-mediated renal oxidative stress.

• Journal of Nutrition and Health
• /
• v.26 no.3
• /
• pp.347-356
• /
• 1993

Plasma concentrations of zinc and copper were measured in 59 non-pregnant women and 105 pregnant women(12 ; early pregant, 93 ; late pregnant) to estimate and compare both groups and to detect the effects of iron supplementation on the plasma zinc and copper concentrations in the pregant women. The mean plasma zinc concentration of the early pregnant group was not significantly different with those of the non-pregnant group. But in contrast, the mean plasma zinc concentration of the late pregnant group was significantly lower than those of the non-pregnant and early pregnant group. Mean plasma copper concentration were significantly elevated in ealry pregnant group and doubled in late pregnant compared to non-pregnant. In Fe supplemented group, mean plasma zinc concentrations were lower and mean plasma copper higher than those of Fe non-supplemented group. It appeared that Fe supplementation had effects on the decrease of plasma zinc concentrations in pregnancy.

• Journal of the Korean Magnetics Society
• /
• v.14 no.2
• /
• pp.59-64
• /
• 2004

We investigated the soft magnetic properties of nanocrystalline Fe-Al-O film as etching the oxide film with ion beam etching method. It is thought that the grain size of Fe-Al-O film increases as the thickness decreases. The coercivity and squareness increase with decreasing thickness. The surface curvature of Am images increases when the etching experiment proceeds. This phenomena could be due to the grain growth which occurs during sputtering. This grain growth could be assisted by the the plasma energy during sputtering. Therefore proper thickness should be searched to acquire the good soft magnetic properties for the nanocrystalline film material. Good soft magnetic properties of Fe-Al-O film was acquired at the thickness of more than 900 nm.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.52-59
• /
• 2004

As deposited and annealed MTJs with the structure of $Ta(5 nm)/Cu(10 nm)/Ta(5 nm)/Ni_{80}Fe_{20}(2 nm)/Cu(5 nm)/ Ir_{25}Mn_{75}(10 nm)/Co_{70}Fe_{30}(2.5 nm)/Al-O/Co_{70}Fe_{30}(2.5nm)/Ni_{80}Fe_{20}(t)/Ta(5nm)/Ni_{80}Fe_{20}(t)/Ta(5 nm)$, where t=10, 30, 60 and 100 nm were characterized by XRD and magnetic hysteresis loops measurements. The XRD measurements were done in grazing incidence $(GID scan-2{\theta})$ and ${\theta}-2{\theta}$ geometry, by rocking curve $(scan-{\omega})$ and pole figures in order to establish correlation between texture and crystallites size and magnetic parameters of exchange biased and interlayer coupling. The variations of shifting and coercivity field of free and pinned layers after annealing in $300^{\circ}C$ correlate with the improvement of ［111］ texture and grains size of $Ni_{80}Fe_{20}$ and $Ir_{25}Mn_{75}$ respectively. The exchange biased and the coercivity fields of the pinned layer linearly increased with increasing grain size of $Ir_{25}Mn_{75}$, The reciprocal proportionality between interlayer coupling and coercivity fields of the free layer and grain size of $Ni_{80}Fe_{20}$ was found. The enhancement of interlayer coupling between pinned and free layers, after annealing treatment, indicates on the correlated in-phase roughness of dipolar interacting interfaces due to increase of crystallites size of $Ni_{80}Fe_{20}$.