• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.589-601
• /
• 2010

Recently it has been frequently reported arsenic contamination of geologic origin in groundwater. The iron-impregnated ranular activated carbon (Fe-GAC) was developed for effective removal of arsenic from groundwater n the study. Fe-GACs were prepared by impregnating iron compounds into a supporting medium (GAC) with 0.05 M iron nitrate solution. The materials were used in arsenic adsorption isotherm tests to know the effect of iron impregnation time, batch kinetic tests to understand the influence of pH, and column tests to evaluate for the preliminary operation of water treatment system. The results showed that the minimum twelve hours of impregnation time were required for making the Fe-GAC with sufficient iron content for arsenic removal, confirmed by a high arsenic adsorption capacity evaluated in the isotherm tests. Most of the impregnated iron compounds were iron hydroxynitrate $Fe_4(OH)_{11}NO_3{\cdot}2H_2O$ but a mall quantity of hematite was also identified in X-ray diffraction(XRD) analysis. The batch isotherms of Fe-GAC for arsenic adsorption were well explained by Langmuir than Freundlich model and the iron contents of Fe-GAC have positive linear correlations on logarithmic plots with Freundlich distribution coefficients ($K_F$ and Langmuir maximum adsorption capacities ($Q_m$. The results of kinetic experiments suggested hat Fe-GAC had he excellent arsenic adsorption capacities regardless of all pH conditions except for pH 11 and could be used a promising adsorbents for groundwater arsenic removal considering the general groundwater pH range of 6-8. The pseudo-second order model, based on the assumption that the ate-limiting step might be chemisorption, provided the best correlation of the kinetic experimental data and explained the arsenic adsorption system f Fe-GAC. The column test was conducted to valuate the feasibility of Fe-GAC use and the operation parameters in arsenic groundwater treatment system. The parameters obtained from the column test were the retardation actor of 482.4 and the distribution coefficient of 581.1 L/mg which were similar values of 511.5-592.5 L/mg acquired from Freundlich batch isotherm model. The results of this study suggested that Fe-GAC could be used as promising adsorbent of arsenic removal in a small groundwater supply system with water treatment facility.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.167-172
• /
• 2020

The effectiveness of in situ sediment capping as a technique for heavy metal risk mitigation in Hyeongsan River estuary, South Korea was studied. Sites in the estuary were found previously to show moderate to high levels of contamination of mercury, methylmercury and other heavy metals. A 400 m x 50 m section of the river was selected for a thin layer capping demonstration, where the total area was divided into 4 sections capped with different combinations of capping materials (zeolite, AC/zeolite, AC/sand, zeolite/sand). Pore water concentrations in the different sites were studied using diffusive gradient in thin film (DGT) probes. All capping amendments showed reduction in the pore water concentration of the different heavy metals with top 5 cm showing %reduction greater than 90% for some heavy metals. The relative maxima for the different metals were found to be translated to lower depths with addition of the caps. For two-layered cap with AC, order of placement should be considered since AC can easily be displaced due to its relatively low density. Investigation of methylmercury (MeHg) in the site showed that MeHg and %MeHg in pore water corresponds well with maxima for sulfide, Fe and Mn suggesting mercury methylation as probably coupled with sulfate, Fe and Mn reduction in sediments. Our results showed that thin-layer capping of active sorbents AC and zeolite, in combination with passive sand caps, are potential remediation strategy for sediments contaminated with heavy metals.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.217-226
• /
• 1993

Stream sediment samples were collected in the vicinity of the Sambo Pb-Zn-barite mine in order to investigate dispersion patterns and pollution levels of heavy metals, and to find out their mode of occurrences. Those samples were analyzed for Cd, Cu, Pb, Zn, Fe, and Mn by using partial extraction and sequential extraction methods. Stream sediments of this studied area has been contaminated severely by Pb, Zn, and Cd. Dispersion patterns of heavy metals in those sediments are different according to their pollution source and sampling distance from the mine. The stream sediment pH is generally neutral in control area, and is slightly acidic in the lower part of tailing dam. The main pollution source of stream sediments was confirmed as tailing and mine drainage. Their pollution level depends mainly on inflowed water and distance from the mine. The tolerance index ranges from -0.9 to 0.7. The mode of occurrances of heavy metals in polluted stream sediment are identified as Fe-Mn oxides, organic bounded and carbonate-bounded compound which show high potential of bioavailablity.

• Mycobiology
• /
• v.37 no.3
• /
• pp.215-217
• /
• 2009

Sixty four samples of cocoa beans replicated in quadruplicates were collected from five warehouses from southwest Nigeria and examined for fungal loads, ergosterol and eohratoxin A The levels of all the variables obtained were further used as indices for cocoa grading into food quality, FoQ (erg < 5 mg/kg; OTA < $1{\mu}g$/kg), feed quality, FeQ (erg = $5{\sim}10\;mg$/kg; OTA in the range of $1.1{\sim}3.11{\mu}g$/kg), Screen for mycotoxin, SFM (erg = $10{\sim}20\;mg$/kg; OTA from $3.12{\mu}g$/kg and above) with fuel quality, FuQ having erg > 20 mg/kg and OTA > $6.12{\mu}g$/kg. Using these ergosterol indices, 18.75% of the cocoa beans examined was classified with the FoQ, 18.75% with the FuQ while 31.25% was classified with both the FeQ and the SFM, respectively. In conclusion, ergosterol can be used as a rapid index to grade fermented, dried cocoa beans meant for export.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.101-111
• /
• 2005

The objectives of this study we to assess the extent and degree of environmental contamination and to draw general conclusions on the fate of toxic elements derived from mining activities in Korea. 인t abandoned mines with four base-metal mines and four Au-Ag mines were selected and the results of environmental surveys in those areas were discussed. In the base-metal mining areas, the Sambo Pb-Zn-barite, the Shinyemi Pb-Zn-Fe, the Geodo Cu-Fe and the Shiheung Cu-Pb-Zn mine, significant levels of Cd, Cu, Pb and Zn were found in mine dump soils developed over mine waste materials, tailings and slag. Furthermore, agricultural soils, stream sediments and stream water near the mines were severely contaminated by the metals mainly due to the continuing dispersion downstream and downslope from the sites, which was controlled by the feature of geography, prevailing wind directions and the distance from the mine. In e Au-Ag mining areas, the Kubong, the Samkwang, the Keumwang and the Kilkok mines, elevated levels of As, Cd, Cu, Pb and Zn were found in tailings and mine dump soils. These levels may have caused increased concentrations of those elements in stream sediments and waters due to direct dis-charge downstream from tailings and mine dumps. In the Au-Ag mines, As would be the most characteristic contaminant in the nearby environment. Arsenic and heavy metals were found to be mainly associated with sulfide gangue minerals, and mobility of these metals would be enhanced by the effect of oxidation. According to sequential extraction of metals in soils, most heavy metals were identified as non-residual chemical forms, and those are very susceptible to the change of ambient conditions of a nearby environment. As application of pollution index (PI), giving data on multi-element contamination in soils, over 1.0 value of the PI was found in soils sampled at and around the mining areas.

• Korean Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.377-384
• /
• 2010

Heavy metal accumulation levels of inhabitant fish, Hemibarbus labeo in Andong and Imha reservoirs were analyzed using an inductively coupled plasma spectrometer and atomic absorption spectrometer. Heavy metal contents of H. labeo from Andong reservoir were higher than those from Imha reservoir. Likewise, relative high contents of As, Cd and Hg were detected in the tissues from Andong reservoir. Among the heavy metals, Al, As and Fe were detected with high concentration in the gill tissues but not in the muscle tissues. Also, the average content of Zn was almost similar in all tissues. In addition, high accumulated level of Al, Cr, Cu and Mn were detected in gill and kidney tissues of H. labeo from Andong reservoir. As a result, the heavy metal contents from the inhabitant fishes, H. labeo, in Andong reservoir showed higher than those in Imha reservoir. We propose that heavy metal contamination in water and in inhabitated fishes is caused from various metals derived from water and sediments in water environment of Andong reservoir.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.1
• /
• pp.33-46
• /
• 2001

The purpose of this study was to investigate the natural dyeability of silk on extract of Artemisia princeps, The experimental items were divided into the mordanting method. comonent of fabric, kind of mordant. The experimental study was done by laundering fastness, abrasion(dry/wet) fastness, perspiration(acid/alkali) fastness, light fastness test and color difference by C.C.M system. The summarized finding resulted from experiments and investigation are suggested as follows; First, in the C. C. M test on mordanting methods, color difference was significantly improved when mordants were treatmented. And the premordanting method showed the highest color difference, color was most yellow-greenish, Second, in the C.C.M test on component of fabrics, color difference of silk was higher than cotton. It is considered that silk has -$NH_2$ , -COOH, -OH than more than cotton. Third, in dyeing-fastness on mordants, laundering fastness showed that color-change was 2~3 grade, the contamination on attached fabric was 4~5 grade. perspiration fastness(acid/alkali) showed 4~5 grade nearly and those of acid was higher than alkali. abrasion fastness(dry/wet) was 4~5 grade and in Fe(3~4 grade) was lower than the other mordants. Forth, in color difference analysis on mordants, Fe(50.0) showed the highest and the order of color difference was alum(16.0), Cu(7.2), Sn(3.5), Al(3.1), Cr(2.3), The Hue was turned into yellow-greenish in alum mordant treatment, the luminocity of color was most dark in Fe(-48.9) and Cu(-7.2), chroma was the highest in alum (15.7) method.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.201-213
• /
• 2002

Chemical analyzes were carried out the samples from roadsides of the Gwangju city. The purpose of this research is to investigate the concentrations and distribution patterns of heavy metals due to urbanization and industrialization in the Gwangju city This study area is not significantly contaminated based on the concentrations of Cd, Cu, Fe, Mn, Pb and Zn. However, the concentrations of the chemical elements analyzed are locally higher than those of serious contamination level indicated by Ministry of environment. The dust pH is in the rage of 5.60-7.09 and was generally neutral, and there are no difference in pollution area and nonpollution area. Chemical analyses utilized are dilution by 0.1N HCl. In result of analysis by the method using 0.1N HCl, concentrations of Cd and Cu are a little high in Gwangchondong of Seo-Gu. Concentrations of Mn and Pb are a little high in Buk-Gu and Nam-gu, and Concentrations of Zn are generally higher than average of soils. Zn, in the study area, keeps polluting greatly as Zn concentration of average is 150.9ppm. All of P.I values are lower than 1, it means heavy metal pollution is not serious.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.31-43
• /
• 2017

This study investigated mineralogy, spectral characteristics and heavy metal contamination including Cd, Ni, Al, Fe, Mn and S for white precipitation in Miin falls based on XRF, XRD, and spectrometer. As a result, Al concentration was abnormally high at all samples, and most of the samples showed high contamination level in Cd and Ni. XRD results detected quartz, kaolinite, rhomboclase, aluminocoquimbite, and gibbsite which infers that heavy metal elements are distributed by adsorption with clay minerals. Spectral characteristics of white precipitation can be described by increasing pattern of reflectance in visible spectrum and decreasing pattern of reflectance in longer wave length including near infrared and shortwave infrared spectrum. The absorption features reveals that spectral characteristics of white precipitation is mainly controlled by kaolinite, rhomboclase, aluminocoquimbite, and gibbsite. The relationship between heavy metal concentration and absorption depth showed high positive correlation for Al concentration and absorption feature at 2202 nm of Al-OH absorption. This spectral characteristics indicates that absorption depth could be effectively used for estimation of heavy metal concentration.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.51-63
• /
• 2022

In this study, the TPH(Total Petroleum Hydrocarbon) contamination and microbial ecological characteristics in petroleum-contaminated site were investigated through the correlation among the vertical TPH contamination distribution of the site, the geochemical characteristics, and the indigenous microbial ecology. The high TPH concentration showed in the vicinity of 3~4 m or less which is thought to be affected by vertical movement due to the impervious clay layer. In addition, the TPH concentration was found to have a positive correlation with Fe²⁺, TOC concentration, and the number of petroleum-degrading bacteria, and a negative correlation with the microbial community diversity. The microbial community according to the vertical distribution of TPH showed that Proteobacteria and Firmicutes at the phylum level were dominant in this study area as a whole, and they competed with each other. In particular, it was confirmed that the difference in the microbial community was different due to the difference in the degree of vertical TPH contamination. In addition, the genera Acidovorax, Leptolinea, Rugoshibacter, and Smithella appeared dominant in the samples in which TPH was detected, which is considered to be the microorganisms involved in the degradation of TPH in this study area. It is expected that this study can be used as an important data to understand the contamination characteristics and biogeochemical and microbial characteristics of these TPH-contaminated sites.