• 정보과학회 논문지
• /
• 제42권2호
• /
• pp.235-241
• /
• 2015

국부 선형 임베딩(Locally Linear Embedding, LLE) [1]는 다양체 학습(manifold learning) 알고리즘 중 하나로 고차원 공간에 있는 데이터들 사이의 내적 값을 기반으로 임베딩하는 방법이다. LLE를 이용하여 임베딩 한 결과는 독특한 성질이 있는데, 고차원 공간 상에서 같은 평면에 있는 데이터들은 내적 값이 크기 때문에 저차원 공간에서도 가깝게 위치하도록 임베딩 되는 반면 수직으로 위치한 평면에있는 데이터들은 내적 값이 0이 되기 때문에 서로 떨어진 위치에 임베딩된다. 한편, 한 사람의 얼굴에 다양한 각도에서 조명을 비추면서 촬영한 이미지들은 저차원의 선형 부분공간을 구성한다는 사실이 잘 알려져 있다 [2]. 이에 본 논문에서는 다른 평면에 위치하는 데이터들을 자연스럽게 분류하여 임베딩하는 LLE 알고리즘을 얼굴 이미지에 사용하여 효과적으로 얼굴 인식 문제를 해결할 수 있는 방법을 제안한다. 제안하는 방법은 LLE에 연립 대각화(Simultaneous Diagonalization, SD)를 적용한 방법으로, S연립 대각화를 적용하면 데이터들이 형성하는 평면이 수직이 되도록 바꿀 수 있기 때문에 LLE의 성질을 극대화 할 수 있다. 실험 결과, 연립 대각화를 적용하고 LLE를 적용하면 서로 다른 사람의 얼굴 이미지들이 겹치지 않고 뚜렷하게 구분되는 효과가 있음을 확인하였다.

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.103-113
• /
• 1984

This work was undertaken to evaluate the integumental response in lower face to hard tissue changes, and to grope the prediction equation for expected integumental profile changes. Cephalometric headplates of 25 persons consisted of 8 Angle's class 1 maxillary protrusive and 17 Angle's class II division 1 patients whose mean age was 15.2 years were traced, diagramatized, and statistically analyzed. The results were as follows; 1. Upper incisor and lips were retracted and convexity of integumental profile decreased concurrently with decrease of hard tissue procumbency, however soft tissue point A', B', and Pog' did not undergo significant changes after orthodontic treatment. 2. Remarkable increment of upper lip thickness and upper lip height was shown and this was related to upper incisor retraction. The ratio between the amount of upper incisor retraction and the increment o f upper lip thickness was approximately 1.16:1. 3. Moderate correlation of upper lip retraction to upper incisor retraction, and of lower lip retraction to lower incisor movement were arranged, and yet comparatively wide variability from subject to subject was shown. 4. It was possible to predict statistically for horizontal alteration of lip position and change of upper lip angulation ground in orthodontic treatment.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.97-102
• /
• 2021

The development of CG technology throughout the 2000s brought about a significant growth in the animation market. This phenomenon led to an increase in the number of people required by related industries, which led to an increase in the number of related majors in universities. CG application technologies are becoming more common with the advent of YouTube and virtual YouTubers, but high technology is still required for students to get a job. This situation is not easy to include both technological and creative skills in the college animation curriculum. In order to increase students' creativity, we need a lot of production experience, which requires a lot of knowledge and time if we only use tools like Maya and 3D Max. In this paper, We tried to devote more time to storytelling by minimizing the technical process required for production and proceeding with repetitive or difficult processes for content creation using third-party programs. And through the 12-week class, the experimental production process was applied to the process from planning to completion of animation works that students would submit to the advertisement contest.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권3호
• /
• pp.1243-1263
• /
• 2018

The two-stage linear discrimination analysis (TSLDA) is a feature extraction technique to solve the small size sample problem in the field of image recognition. The TSLDA has retained all subspace information of the between-class scatter and within-class scatter. However, the feature information in the four subspaces may not be entirely beneficial for classification, and the regularization procedure for eliminating singular metrics in TSLDA has higher time complexity. In order to address these drawbacks, this paper proposes an improved two-stage linear discriminant analysis (Improved TSLDA). The Improved TSLDA proposes a selection and compression method to extract superior feature information from the four subspaces to constitute optimal projection space, where it defines a single Fisher criterion to measure the importance of single feature vector. Meanwhile, Improved TSLDA also applies an approximation matrix method to eliminate the singular matrices and reduce its time complexity. This paper presents comparative experiments on five face databases and one handwritten digit database to validate the effectiveness of the Improved TSLDA.

• 한국유통학회지:유통연구
• /
• 제2권1호
• /
• pp.215-230
• /
• 1997

Today, The biggest problem in the structure of high cost and low efficient economic situation in Korea is found due to problem of cost circulation field, so the government officials and enterprises trying to solve it. In fact, The high cost, low efficient structure is not good to poor circulation of goods among businesses, especially in Dae-gus local industries. also, we face there is a shortage of indirect social capital which caused by a lack of connectoin among businesses in the circulation field. Recently, in order to solve the problem of circulation, it is above all necessary that government and local authorities pay attention to it and effort of positive and drastical investment. As the economy of Dae-gu would be activiate and local firms competion should be strengthen, it is request that the policy for efficiency in the circulation of goods need to effort as follows; 1. The highest class of local firms try to convert of knowledge in order to reduce the cost of goods. 2. To efficient of firms goods, it is essential that standardize the goods and spread for automation, so in the long run, There will be thrust forward establishment of total goods information network.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.432-439
• /
• 2004

Korean certification regulation for particulate filtering respirators requires inward leakage (IL) test as European Standards (EN) and the standard levels of regulation are the same as those of EN. This study was conducted to evaluate particulate filtering respirators being commercially used in the market by using IL and assess the characteristics of IL. The study began with discussing the concept of IL, comparison of IL with fit test, and IL measurement method. Three brands of half masks and 10 brands of filtering facepieces (two top class, four 1st class and four 2nd class), total 13 brands respirators, and 10 test panels (subjects) who were classified in 9 facial grids in accordance with face length and lip length, were selected for IL test. IL tests were conducted in the laboratory of 3M Innovation Center which was established by EN standard. As expected ILs of half masks were lower than those of filtering facepiece mask. ILs of half masks and some filtering facepieces were significantly different in manufacturers. ILs of 1st class filtering facepieces were found to be much more than those of 2nd class and thus the result would cause wearers to get confused to select a mask. Four of six brands being no compliance with standards were thought that they should be tested again for certification because of a lot of differences from standards. There were no significant differences among ILs of five exercises. In 6 out of 13 brands lognormal distribution of ILs may be a better fit distribution and in 7 brands both lognormal and normal distributions were rejected. The result indicates that geometric mean may be better than arithmetic mean to establish standard.

• Asian review of World Histories
• /
• 제2권2호
• /
• pp.147-167
• /
• 2014

The urban modernity that became an irresistible model for elites in Asia in the decades before and after 1900 was far from being gender-neutral. It represented an exceptional peak of patriarchy in its exclusion of respectable middle class women from the work force, from ownership and control of property and from politics. Marriage was indissoluble and the wife's role in the male-headed nuclear family was to care for and educate the abundant children she produced. Puritan religious values underlined the perils for women of falling outside this pattern of dependence on the male. Though upheld as modern and civilized, this ideal was in particularly striking contrast with the pre-colonial Southeast Asian pattern of economic autonomy and balance between women and men, and the relative ease of female-initiated divorce. Although attractive to many western-educated Southeast Asian men, including religious reformers determined to 'save' and domesticate women, urban respectability of this type was a poor fit for women accustomed to dominant roles in commerce and marketing, and at least equal ones in production. Southeast Asian relative failure in the high colonial era to adapt to the modern market economy may also have a gendered explanation. We should not be surprised that patriarchy and puritanism became more important in Southeast Asia as it urbanized in the late 20th Century, since this was echoing the European experience a century earlier. The question remains how far Southeast Asia could retain its relatively balanced gender pattern in face of its eventual rapid urbanization and commercial development.

• 한국IT서비스학회지
• /
• 제15권4호
• /
• pp.175-191
• /
• 2016

This paper investigates changing processes of new product development (NPD) systems. In order to continuously develop first-class products, world wide super-class products and hit products, R&D (Research & Development) must be competitive. Firms must achieve competitiveness in terms of quality and cost by launching new products. Most films focus on improving effectiveness and efficiency of NPD process. However, sometimes, they face to the critical challenge of transforming NPD processes entirely reflecting dramatic change of their core products. Transforming of NPD process is difficult in that it involves technological and organizational changes in marketing, R&D, Engineering and manufacturing systems. The purpose of this paper is to shed light on processes and factors affecting successful transformation of new product development systems. We present a case study on the changing processes of S company's NPD process. S company has changed new product development systems successfully from a major IT equipment supplier to an automotive supplier. Empirical results show successful changes of 10 core NPD processes from understanding the market and customers process to after sales process. In case of transformation of NPD, adaption of attribute of business is crucial for success factors in the process innovation. This paper shows the bridging the gap between IT and automotive industrial dynamics and growth through adaption of two processes in the NPD.

• 대한치과의사협회지
• /
• 제54권12호
• /
• pp.948-970
• /
• 2016

For three years, from 2014 to 2016, in dental history class, 263 3rd grade students, attending postgraduate dental school had reviewed current problems of the dentistry and dental care system by adopting historical thinking, in forms of essays, editorials, and papers, The purpose of this study is to know whether writing has educational benefits on students. Analysis of the writings and Student course evaluation showed that it is beneficial. All of the students agreed on submitting a qualitative study project instead of taking midterms on 2016. The approval ratio has increased over the years, on 2014 being 82%, on 2015 being 98%, on 2016 being 100%. For that reason, it is not an assertion to deduce that the students have experienced benefits while developing their genuine thoughts on the current status or problems, exploring what their role is, and what they will face. The chronological thinking had been used throughout the researches to identify what Dentistry and Dentist is. Dentistry have encompassed knowledges of natural sciences, humanities and other fields when needed to perfect itself. In doing so, Dentist achieved independence from doctor or other cooperatives. Research on Korean Dental care system has involved in historical thinking, including historical analysis, inquisition, and historical imagination, insight. etc. If the in-depth evaluation consisting of history and writing is sustained, it would be very effective teaching method.

• International Journal of Contents
• /
• 제14권3호
• /
• pp.69-74
• /
• 2018

A new breed of universities equipped with student-centered education programs and advanced digital technologies is changing the face of higher education. "Flipped learning" is heralded as a new model of education, yet its effect is underexplored. The purpose of this study is to provide evaluation criteria to assess and understand the merit of student-centered education programs and apply them to actual cases. Discussion on the nature of knowledge, its production mechanism and system, and possible contribution of digital technology to user-centered programs are discussed to produce five key criteria; initiative of students, interaction in class, interaction in field, customization of courses, and automated personal service. They are applied to evaluation of Minerva and Ecole 42.